From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<linuxarm@huawei.com>, Yunsheng Lin <linyunsheng@huawei.com>,
Peng Li <lipeng321@huawei.com>,
Huazhong Tan <tanhuazhong@huawei.com>
Subject: [PATCH net-next 03/12] net: hns3: make HW GRO handling compliant with SW GRO
Date: Thu, 6 Jun 2019 16:20:58 +0800 [thread overview]
Message-ID: <1559809267-53805-4-git-send-email-tanhuazhong@huawei.com> (raw)
In-Reply-To: <1559809267-53805-1-git-send-email-tanhuazhong@huawei.com>
From: Yunsheng Lin <linyunsheng@huawei.com>
Currently when a GRO packet is assembled by HW, the checksum is
modified to reflect the entire packet by HW and skb->ip_summed is
set to CHECKSUM_UNNECESSARY, which is not compliant with SW GRO.
This patch sets up skb's network and transport header, sets the
GRO packet's checksum according to pseudo header and set the
skb->ip_summed to CHECKSUM_PARTIAL.
This patch also use gso_size to distinguish GRO packet from
normal packet, use eth_type_vlan to check the VLAN type and set
the SKB_GSO_TCP_FIXEDID according to BD info during HW GRO info
processing.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 44 +++++++++++++++++--------
1 file changed, 30 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 0501b78..c37509e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -17,6 +17,7 @@
#include <linux/sctp.h>
#include <linux/vermagic.h>
#include <net/gre.h>
+#include <net/ip6_checksum.h>
#include <net/pkt_cls.h>
#include <net/tcp.h>
#include <net/vxlan.h>
@@ -2384,13 +2385,13 @@ static void hns3_nic_reuse_page(struct sk_buff *skb, int i,
}
}
-static int hns3_gro_complete(struct sk_buff *skb)
+static int hns3_gro_complete(struct sk_buff *skb, u32 l234info)
{
__be16 type = skb->protocol;
struct tcphdr *th;
int depth = 0;
- while (type == htons(ETH_P_8021Q)) {
+ while (eth_type_vlan(type)) {
struct vlan_hdr *vh;
if ((depth + VLAN_HLEN) > skb_headlen(skb))
@@ -2401,10 +2402,24 @@ static int hns3_gro_complete(struct sk_buff *skb)
depth += VLAN_HLEN;
}
+ skb_set_network_header(skb, depth);
+
if (type == htons(ETH_P_IP)) {
+ const struct iphdr *iph = ip_hdr(skb);
+
depth += sizeof(struct iphdr);
+ skb_set_transport_header(skb, depth);
+ th = tcp_hdr(skb);
+ th->check = ~tcp_v4_check(skb->len - depth, iph->saddr,
+ iph->daddr, 0);
} else if (type == htons(ETH_P_IPV6)) {
+ const struct ipv6hdr *iph = ipv6_hdr(skb);
+
depth += sizeof(struct ipv6hdr);
+ skb_set_transport_header(skb, depth);
+ th = tcp_hdr(skb);
+ th->check = ~tcp_v6_check(skb->len - depth, &iph->saddr,
+ &iph->daddr, 0);
} else {
netdev_err(skb->dev,
"Error: FW GRO supports only IPv4/IPv6, not 0x%04x, depth: %d\n",
@@ -2412,13 +2427,16 @@ static int hns3_gro_complete(struct sk_buff *skb)
return -EFAULT;
}
- th = (struct tcphdr *)(skb->data + depth);
skb_shinfo(skb)->gso_segs = NAPI_GRO_CB(skb)->count;
if (th->cwr)
skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ if (l234info & BIT(HNS3_RXD_GRO_FIXID_B))
+ skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_FIXEDID;
+ skb->csum_start = (unsigned char *)th - skb->head;
+ skb->csum_offset = offsetof(struct tcphdr, check);
+ skb->ip_summed = CHECKSUM_PARTIAL;
return 0;
}
@@ -2656,18 +2674,20 @@ static int hns3_set_gro_and_checksum(struct hns3_enet_ring *ring,
struct sk_buff *skb, u32 l234info,
u32 bd_base_info, u32 ol_info)
{
- u16 gro_count;
u32 l3_type;
- gro_count = hnae3_get_field(l234info, HNS3_RXD_GRO_COUNT_M,
- HNS3_RXD_GRO_COUNT_S);
+ skb_shinfo(skb)->gso_size = hnae3_get_field(bd_base_info,
+ HNS3_RXD_GRO_SIZE_M,
+ HNS3_RXD_GRO_SIZE_S);
/* if there is no HW GRO, do not set gro params */
- if (!gro_count) {
+ if (!skb_shinfo(skb)->gso_size) {
hns3_rx_checksum(ring, skb, l234info, bd_base_info, ol_info);
return 0;
}
- NAPI_GRO_CB(skb)->count = gro_count;
+ NAPI_GRO_CB(skb)->count = hnae3_get_field(l234info,
+ HNS3_RXD_GRO_COUNT_M,
+ HNS3_RXD_GRO_COUNT_S);
l3_type = hnae3_get_field(l234info, HNS3_RXD_L3ID_M,
HNS3_RXD_L3ID_S);
@@ -2678,11 +2698,7 @@ static int hns3_set_gro_and_checksum(struct hns3_enet_ring *ring,
else
return -EFAULT;
- skb_shinfo(skb)->gso_size = hnae3_get_field(bd_base_info,
- HNS3_RXD_GRO_SIZE_M,
- HNS3_RXD_GRO_SIZE_S);
-
- return hns3_gro_complete(skb);
+ return hns3_gro_complete(skb, l234info);
}
static void hns3_set_rx_skb_rss_type(struct hns3_enet_ring *ring,
--
2.7.4
next prev parent reply other threads:[~2019-06-06 8:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 8:20 [PATCH net-next 00/12] net: hns3: some code optimizations & cleanups & bugfixes Huazhong Tan
2019-06-06 8:20 ` [PATCH net-next 01/12] net: hns3: log detail error info of ROCEE ECC and AXI errors Huazhong Tan
2019-06-06 17:36 ` David Miller
2019-06-07 0:29 ` tanhuazhong
2019-06-06 8:20 ` [PATCH net-next 02/12] net: hns3: fix wrong size of mailbox responding data Huazhong Tan
2019-06-06 8:20 ` Huazhong Tan [this message]
2019-06-06 8:20 ` [PATCH net-next 04/12] net: hns3: replace numa_node_id with numa_mem_id for buffer reusing Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 05/12] net: hns3: refactor hns3_get_new_int_gl function Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 06/12] net: hns3: trigger VF reset if a VF has an over_8bd_nfe_err Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 07/12] net: hns3: Delete the redundant user nic codes Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 08/12] net: hns3: small changes for magic numbers Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 09/12] net: hns3: use macros instead of " Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 10/12] net: hns3: refactor PF/VF RSS hash key configuration Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 11/12] net: hns3: some modifications to simplify and optimize code Huazhong Tan
2019-06-06 8:21 ` [PATCH net-next 12/12] net: hns3: fix some coding style issues Huazhong Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559809267-53805-4-git-send-email-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=linyunsheng@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®