From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<linuxarm@huawei.com>, Jian Shen <shenjian15@huawei.com>,
Peng Li <lipeng321@huawei.com>,
"Huazhong Tan" <tanhuazhong@huawei.com>
Subject: [PATCH net-next 03/11] net: hns3: sync VLAN filter entries when kill VLAN ID failed
Date: Thu, 20 Jun 2019 16:52:37 +0800 [thread overview]
Message-ID: <1561020765-14481-4-git-send-email-tanhuazhong@huawei.com> (raw)
In-Reply-To: <1561020765-14481-1-git-send-email-tanhuazhong@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
When HW is resetting, firmware is unable to handle commands
from driver. So if remove VLAN device from stack at this time,
it will fail to remove the VLAN ID from HW VLAN filter, then
the VLAN filter status is unsynced with stack.
This patch fixes it by recording the VLAN ID delete failed,
and removes them again when reset complete.
Fixes: 44e626f720c3 ("net: hns3: fix VLAN offload handle for VLAN inserted by port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 74 ++++++++++++++++++----
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 +
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 50 ++++++++++++++-
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 3 +
4 files changed, 112 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 90cbdbe..6e97837 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -35,6 +35,7 @@
static int hclge_set_mac_mtu(struct hclge_dev *hdev, int new_mps);
static int hclge_init_vlan_config(struct hclge_dev *hdev);
+static void hclge_sync_vlan_filter(struct hclge_dev *hdev);
static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev);
static bool hclge_get_hw_reset_stat(struct hnae3_handle *handle);
static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
@@ -3539,6 +3540,7 @@ static void hclge_service_task(struct work_struct *work)
hclge_update_port_info(hdev);
hclge_update_link_status(hdev);
hclge_update_vport_alive(hdev);
+ hclge_sync_vlan_filter(hdev);
if (hdev->fd_arfs_expire_timer >= HCLGE_FD_ARFS_EXPIRE_TIMER_INTERVAL) {
hclge_rfs_filter_expire(hdev);
hdev->fd_arfs_expire_timer = 0;
@@ -7742,11 +7744,20 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
bool writen_to_tbl = false;
int ret = 0;
- /* when port based VLAN enabled, we use port based VLAN as the VLAN
- * filter entry. In this case, we don't update VLAN filter table
- * when user add new VLAN or remove exist VLAN, just update the vport
- * VLAN list. The VLAN id in VLAN list won't be writen in VLAN filter
- * table until port based VLAN disabled
+ /* When device is resetting, firmware is unable to handle
+ * mailbox. Just record the vlan id, and remove it after
+ * reset finished.
+ */
+ if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+ set_bit(vlan_id, vport->vlan_del_fail_bmap);
+ return -EBUSY;
+ }
+
+ /* When port base vlan enabled, we use port base vlan as the vlan
+ * filter entry. In this case, we don't update vlan filter table
+ * when user add new vlan or remove exist vlan, just update the vport
+ * vlan list. The vlan id in vlan list will be writen in vlan filter
+ * table until port base vlan disabled
*/
if (handle->port_base_vlan_state == HNAE3_PORT_BASE_VLAN_DISABLE) {
ret = hclge_set_vlan_filter_hw(hdev, proto, vport->vport_id,
@@ -7754,16 +7765,53 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
writen_to_tbl = true;
}
- if (ret)
- return ret;
+ if (!ret) {
+ if (is_kill)
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
+ else
+ hclge_add_vport_vlan_table(vport, vlan_id,
+ writen_to_tbl);
+ } else if (is_kill) {
+ /* When remove hw vlan filter failed, record the vlan id,
+ * and try to remove it from hw later, to be consistence
+ * with stack
+ */
+ set_bit(vlan_id, vport->vlan_del_fail_bmap);
+ }
+ return ret;
+}
- if (is_kill)
- hclge_rm_vport_vlan_table(vport, vlan_id, false);
- else
- hclge_add_vport_vlan_table(vport, vlan_id,
- writen_to_tbl);
+static void hclge_sync_vlan_filter(struct hclge_dev *hdev)
+{
+#define HCLGE_MAX_SYNC_COUNT 60
- return 0;
+ int i, ret, sync_cnt = 0;
+ u16 vlan_id;
+
+ /* start from vport 1 for PF is always alive */
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ struct hclge_vport *vport = &hdev->vport[i];
+
+ vlan_id = find_first_bit(vport->vlan_del_fail_bmap,
+ VLAN_N_VID);
+ while (vlan_id != VLAN_N_VID) {
+ ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
+ vport->vport_id, vlan_id,
+ 0, true);
+ if (ret && ret != -EINVAL)
+ return;
+
+ clear_bit(vlan_id, vport->vlan_del_fail_bmap);
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
+
+ sync_cnt++;
+ if (sync_cnt >= HCLGE_MAX_SYNC_COUNT)
+ return;
+
+ vlan_id = find_first_bit(vport->vlan_del_fail_bmap,
+ VLAN_N_VID);
+ }
+ }
}
static int hclge_set_mac_mtu(struct hclge_dev *hdev, int new_mps)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index c55fd61..8c4e47a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -929,6 +929,7 @@ struct hclge_vport {
u32 bw_limit; /* VSI BW Limit (0 = disabled) */
u8 dwrr;
+ unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
struct hclge_port_base_vlan_config port_base_vlan_cfg;
struct hclge_tx_vtag_cfg txvlan_cfg;
struct hclge_rx_vtag_cfg rxvlan_cfg;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 270447e..21736e5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1244,6 +1244,7 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
#define HCLGEVF_VLAN_MBX_MSG_LEN 5
struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
u8 msg_data[HCLGEVF_VLAN_MBX_MSG_LEN];
+ int ret;
if (vlan_id > HCLGEVF_MAX_VLAN_ID)
return -EINVAL;
@@ -1251,12 +1252,53 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
if (proto != htons(ETH_P_8021Q))
return -EPROTONOSUPPORT;
+ /* When device is resetting, firmware is unable to handle
+ * mailbox. Just record the vlan id, and remove it after
+ * reset finished.
+ */
+ if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+ set_bit(vlan_id, hdev->vlan_del_fail_bmap);
+ return -EBUSY;
+ }
+
msg_data[0] = is_kill;
memcpy(&msg_data[1], &vlan_id, sizeof(vlan_id));
memcpy(&msg_data[3], &proto, sizeof(proto));
- return hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_VLAN,
- HCLGE_MBX_VLAN_FILTER, msg_data,
- HCLGEVF_VLAN_MBX_MSG_LEN, false, NULL, 0);
+ ret = hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_VLAN,
+ HCLGE_MBX_VLAN_FILTER, msg_data,
+ HCLGEVF_VLAN_MBX_MSG_LEN, false, NULL, 0);
+
+ /* When remove hw vlan filter failed, record the vlan id,
+ * and try to remove it from hw later, to be consistence
+ * with stack.
+ */
+ if (is_kill && ret)
+ set_bit(vlan_id, hdev->vlan_del_fail_bmap);
+
+ return ret;
+}
+
+static void hclgevf_sync_vlan_filter(struct hclgevf_dev *hdev)
+{
+#define HCLGEVF_MAX_SYNC_COUNT 60
+ struct hnae3_handle *handle = &hdev->nic;
+ int ret, sync_cnt = 0;
+ u16 vlan_id;
+
+ vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID);
+ while (vlan_id != VLAN_N_VID) {
+ ret = hclgevf_set_vlan_filter(handle, htons(ETH_P_8021Q),
+ vlan_id, true);
+ if (ret)
+ return;
+
+ clear_bit(vlan_id, hdev->vlan_del_fail_bmap);
+ sync_cnt++;
+ if (sync_cnt >= HCLGEVF_MAX_SYNC_COUNT)
+ return;
+
+ vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID);
+ }
}
static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
@@ -1797,6 +1839,8 @@ static void hclgevf_service_task(struct work_struct *work)
hclgevf_update_link_mode(hdev);
+ hclgevf_sync_vlan_filter(hdev);
+
hclgevf_deferred_task_schedule(hdev);
clear_bit(HCLGEVF_STATE_SERVICE_SCHED, &hdev->state);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 4f86c87..b0ee986 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -4,6 +4,7 @@
#ifndef __HCLGEVF_MAIN_H
#define __HCLGEVF_MAIN_H
#include <linux/fs.h>
+#include <linux/if_vlan.h>
#include <linux/types.h>
#include "hclge_mbx.h"
#include "hclgevf_cmd.h"
@@ -270,6 +271,8 @@ struct hclgevf_dev {
u16 *vector_status;
int *vector_irq;
+ unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
+
bool mbx_event_pending;
struct hclgevf_mbx_resp_status mbx_resp; /* mailbox response */
struct hclgevf_mbx_arq_ring arq; /* mailbox async rx queue */
--
2.7.4
next prev parent reply other threads:[~2019-06-20 8:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 8:52 [PATCH net-next 00/11] net: hns3: some code optimizations & bugfixes Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 01/11] net: hns3: fix selftest fail issue for fibre port with autoneg on Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 02/11] net: hns3: remove VF VLAN filter entry inexistent warning print Huazhong Tan
2019-06-20 8:52 ` Huazhong Tan [this message]
2019-06-20 8:52 ` [PATCH net-next 04/11] net: hns3: restore the MAC autoneg state after reset Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 05/11] net: hns3: code optimizaition of hclge_handle_hw_ras_error() Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 06/11] net: hns3: modify handling of out of memory in hclge_err.c Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 07/11] net: hns3: remove override_pci_need_reset Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 08/11] net: hns3: add check to number of buffer descriptors Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 09/11] net: hns3: fix race conditions between reset and module loading & unloading Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 10/11] net: hns3: fixes wrong place enabling ROCE HW error when loading Huazhong Tan
2019-06-20 8:52 ` [PATCH net-next 11/11] net: hns3: add exception handling when enable NIC HW error interrupts Huazhong Tan
2019-06-22 13:53 ` [PATCH net-next 00/11] net: hns3: some code optimizations & bugfixes David Miller
2019-06-26 7:44 ` tanhuazhong
2019-06-26 15:59 ` David Miller
2019-06-27 1:18 ` tanhuazhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561020765-14481-4-git-send-email-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®