From: tip-bot2 for Tianyu Lan <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>,
Thomas Gleixner <tglx@linutronix.de>,
Michael Kelley <mikelley@microsoft.com>,
Ingo Molnar <mingo@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [tip: timers/core] clocksource/drivers/hyperv: Add Hyper-V specific sched clock function
Date: Fri, 23 Aug 2019 15:04:02 -0000 [thread overview]
Message-ID: <156657264274.8404.12703131421619631346.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20190814123216.32245-3-Tianyu.Lan@microsoft.com>
The following commit has been merged into the timers/core branch of tip:
Commit-ID: bd00cd52d5be655a2f217e2ed74b91a71cb2b14f
Gitweb: https://git.kernel.org/tip/bd00cd52d5be655a2f217e2ed74b91a71cb2b14f
Author: Tianyu Lan <Tianyu.Lan@microsoft.com>
AuthorDate: Wed, 14 Aug 2019 20:32:16 +08:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 23 Aug 2019 16:59:54 +02:00
clocksource/drivers/hyperv: Add Hyper-V specific sched clock function
Hyper-V guests use the default native_sched_clock() in
pv_ops.time.sched_clock on x86. But native_sched_clock() directly uses the
raw TSC value, which can be discontinuous in a Hyper-V VM.
Add the generic hv_setup_sched_clock() to set the sched clock function
appropriately. On x86, this sets pv_ops.time.sched_clock to read the
Hyper-V reference TSC value that is scaled and adjusted to be continuous.
Also move the Hyper-V reference TSC initialization much earlier in the boot
process so no discontinuity is observed when pv_ops.time.sched_clock
calculates its offset.
[ tglx: Folded build fix ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190814123216.32245-3-Tianyu.Lan@microsoft.com
---
arch/x86/hyperv/hv_init.c | 2 --
arch/x86/kernel/cpu/mshyperv.c | 8 ++++++++
drivers/clocksource/hyperv_timer.c | 22 ++++++++++++----------
include/asm-generic/mshyperv.h | 1 +
4 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 0d25868..866dfb3 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -301,8 +301,6 @@ void __init hyperv_init(void)
x86_init.pci.arch_init = hv_pci_init;
- /* Register Hyper-V specific clocksource */
- hv_init_clocksource();
return;
remove_cpuhp_state:
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 062f772..53afd33 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -29,6 +29,7 @@
#include <asm/timer.h>
#include <asm/reboot.h>
#include <asm/nmi.h>
+#include <clocksource/hyperv_timer.h>
struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);
@@ -338,9 +339,16 @@ static void __init ms_hyperv_init_platform(void)
x2apic_phys = 1;
# endif
+ /* Register Hyper-V specific clocksource */
+ hv_init_clocksource();
#endif
}
+void hv_setup_sched_clock(void *sched_clock)
+{
+ pv_ops.time.sched_clock = sched_clock;
+}
+
const __initconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
.name = "Microsoft Hyper-V",
.detect = ms_hyperv_platform,
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 432aa33..c322ab4 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -22,6 +22,7 @@
#include <asm/mshyperv.h>
static struct clock_event_device __percpu *hv_clock_event;
+static u64 hv_sched_clock_offset __ro_after_init;
/*
* If false, we're using the old mechanism for stimer0 interrupts
@@ -222,7 +223,7 @@ struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
}
EXPORT_SYMBOL_GPL(hv_get_tsc_page);
-static u64 notrace read_hv_sched_clock_tsc(void)
+static u64 notrace read_hv_clock_tsc(struct clocksource *arg)
{
u64 current_tick = hv_read_tsc_page(&tsc_pg);
@@ -232,9 +233,9 @@ static u64 notrace read_hv_sched_clock_tsc(void)
return current_tick;
}
-static u64 read_hv_clock_tsc(struct clocksource *arg)
+static u64 read_hv_sched_clock_tsc(void)
{
- return read_hv_sched_clock_tsc();
+ return read_hv_clock_tsc(NULL) - hv_sched_clock_offset;
}
static struct clocksource hyperv_cs_tsc = {
@@ -246,7 +247,7 @@ static struct clocksource hyperv_cs_tsc = {
};
#endif
-static u64 notrace read_hv_sched_clock_msr(void)
+static u64 notrace read_hv_clock_msr(struct clocksource *arg)
{
u64 current_tick;
/*
@@ -258,9 +259,9 @@ static u64 notrace read_hv_sched_clock_msr(void)
return current_tick;
}
-static u64 read_hv_clock_msr(struct clocksource *arg)
+static u64 read_hv_sched_clock_msr(void)
{
- return read_hv_sched_clock_msr();
+ return read_hv_clock_msr(NULL) - hv_sched_clock_offset;
}
static struct clocksource hyperv_cs_msr = {
@@ -298,8 +299,9 @@ static bool __init hv_init_tsc_clocksource(void)
hv_set_clocksource_vdso(hyperv_cs_tsc);
clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
- /* sched_clock_register is needed on ARM64 but is a no-op on x86 */
- sched_clock_register(read_hv_sched_clock_tsc, 64, HV_CLOCK_HZ);
+ hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+ hv_setup_sched_clock(read_hv_sched_clock_tsc);
+
return true;
}
#else
@@ -329,7 +331,7 @@ void __init hv_init_clocksource(void)
hyperv_cs = &hyperv_cs_msr;
clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
- /* sched_clock_register is needed on ARM64 but is a no-op on x86 */
- sched_clock_register(read_hv_sched_clock_msr, 64, HV_CLOCK_HZ);
+ hv_sched_clock_offset = hyperv_cs->read(hyperv_cs);
+ hv_setup_sched_clock(read_hv_sched_clock_msr);
}
EXPORT_SYMBOL_GPL(hv_init_clocksource);
diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h
index 0becb7d..18d8e2d 100644
--- a/include/asm-generic/mshyperv.h
+++ b/include/asm-generic/mshyperv.h
@@ -167,6 +167,7 @@ void hyperv_report_panic(struct pt_regs *regs, long err);
void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
bool hv_is_hyperv_initialized(void);
void hyperv_cleanup(void);
+void hv_setup_sched_clock(void *sched_clock);
#else /* CONFIG_HYPERV */
static inline bool hv_is_hyperv_initialized(void) { return false; }
static inline void hyperv_cleanup(void) {}
prev parent reply other threads:[~2019-08-23 15:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-14 12:32 [PATCH V2 0/2] clocksource/Hyper-V: Add Hyper-V specific sched clock lantianyu1986
2019-08-14 12:32 ` [PATCH V2 1/2] clocksource/Hyper-v: Allocate Hyper-V tsc page statically lantianyu1986
2019-08-16 15:00 ` Daniel Lezcano
2019-08-23 15:04 ` [tip: timers/core] clocksource/drivers/hyperv: Allocate Hyper-V TSC " tip-bot2 for Tianyu Lan
2019-08-14 12:32 ` [PATCH V2 2/2] clocksource/Hyper-V: Add Hyper-V specific sched clock function lantianyu1986
2019-08-23 15:04 ` tip-bot2 for Tianyu Lan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156657264274.8404.12703131421619631346.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=Tianyu.Lan@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®