[PATCH] net: phylink: Fix flow control resolution

[<stefanc@marvell.com>]

From: Stefan Chulski <stefanc@marvell.com>

Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
---
 drivers/net/phy/phylink.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a45c5de..a5a57ca 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -376,8 +376,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
  *  Local device  Link partner
  *  Pause AsymDir Pause AsymDir Result
  *    1     X       1     X     TX+RX
- *    0     1       1     1     RX
- *    1     1       0     1     TX
+ *    0     1       1     1     TX
+ *    1     1       0     1     RX
  */
 static void phylink_resolve_flow(struct phylink *pl,
 				 struct phylink_link_state *state)
@@ -398,7 +398,7 @@ static void phylink_resolve_flow(struct phylink *pl,
 			new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
 		else if (pause & MLO_PAUSE_ASYM)
 			new_pause = state->pause & MLO_PAUSE_SYM ?
-				 MLO_PAUSE_RX : MLO_PAUSE_TX;
+				 MLO_PAUSE_TX : MLO_PAUSE_RX;
 	} else {
 		new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
 	}
-- 
1.9.1