From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-0.6 required=3.0 tests=FROM_EXCESS_BASE64, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 23ED6C6778F for ; Thu, 26 Jul 2018 18:03:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C461920862 for ; Thu, 26 Jul 2018 18:03:07 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C461920862 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=siol.net Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389006AbeGZTVA convert rfc822-to-8bit (ORCPT ); Thu, 26 Jul 2018 15:21:00 -0400 Received: from mailoutvs38.siol.net ([185.57.226.229]:51336 "EHLO mail.siol.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1730250AbeGZTVA (ORCPT ); Thu, 26 Jul 2018 15:21:00 -0400 Received: from localhost (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTP id 29B4752191F; Thu, 26 Jul 2018 20:03:03 +0200 (CEST) X-Virus-Scanned: amavisd-new at psrvmta10.zcs-production.pri Received: from mail.siol.net ([127.0.0.1]) by localhost (psrvmta10.zcs-production.pri [127.0.0.1]) (amavisd-new, port 10032) with ESMTP id chTs7eIqhMpd; Thu, 26 Jul 2018 20:03:02 +0200 (CEST) Received: from mail.siol.net (localhost [127.0.0.1]) by mail.siol.net (Postfix) with ESMTPS id 17ED55219F0; Thu, 26 Jul 2018 20:03:02 +0200 (CEST) Received: from jernej-laptop.localnet (unknown [194.152.15.144]) (Authenticated sender: 031275009) by mail.siol.net (Postfix) with ESMTPA id 6EEAB521A95; Thu, 26 Jul 2018 20:03:01 +0200 (CEST) From: Jernej =?utf-8?B?xaBrcmFiZWM=?= To: linux-sunxi@googlegroups.com, icenowy@aosc.io Cc: Maxime Ripard , Rob Herring , Chen-Yu Tsai , Jagan Teki , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Subject: Re: [linux-sunxi] [PATCH v3.1 10/10] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI Date: Thu, 26 Jul 2018 20:03:00 +0200 Message-ID: <1571011.jY5lUBhtiX@jernej-laptop> In-Reply-To: <20180726171257.6688-11-icenowy@aosc.io> References: <20180726171257.6688-1-icenowy@aosc.io> <20180726171257.6688-11-icenowy@aosc.io> MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Dne četrtek, 26. julij 2018 ob 19:12:57 CEST je Icenowy Zheng napisal(a): > From: Jagan Teki > > Enable all necessary device tree nodes and add connector node to device > trees for all supported A64 boards with HDMI. > > Signed-off-by: Jagan Teki > [Icenowy: squash all board patches altogether and change supply name] > Signed-off-by: Icenowy Zheng > --- > Changes in v3,1: > - Squash all enablement patches altogether. > - Change supply name to match DT binding & driver change. > Changes for v3: > - Enable all pipeline components > Changes for v2: > - none > > .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++ > .../dts/allwinner/sun50i-a64-nanopi-a64.dts | 34 +++++++++++++++++++ > .../dts/allwinner/sun50i-a64-olinuxino.dts | 34 +++++++++++++++++++ > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 34 +++++++++++++++++++ > .../boot/dts/allwinner/sun50i-a64-pine64.dts | 34 +++++++++++++++++++ > .../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++ > 6 files changed, 204 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index > 094cfed13df9..0d8f5571d574 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > @@ -60,6 +60,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > > @@ -86,6 +97,10 @@ > }; > }; > > +&de { > + status = "okay"; > +}; > + > &ehci0 { > status = "okay"; > }; > @@ -103,6 +118,17 @@ > status = "okay"; > }; > > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &i2c1 { > pinctrl-names = "default"; > pinctrl-0 = <&i2c1_pins>; > @@ -120,6 +146,10 @@ > }; > }; > > +&mixer1 { > + status = "okay"; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > @@ -300,6 +330,10 @@ > vcc-hdmi-supply = <®_dldo1>; > }; > > +&tcon1 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index > 98dbff19f5cc..2bcf02f46366 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > @@ -57,6 +57,21 @@ > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > +}; > + > +&de { > + status = "okay"; > }; > > &ehci0 { > @@ -67,6 +82,17 @@ > status = "okay"; > }; > > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > /* i2c1 connected with gpio headers like pine64, bananapi */ > &i2c1 { > pinctrl-names = "default"; > @@ -78,6 +104,10 @@ > bias-pull-up; > }; > > +&mixer1 { > + status = "okay"; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > @@ -199,6 +229,10 @@ > vcc-hdmi-supply = <®_dldo1>; > }; > > +&tcon1 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index > 3f531393eaee..5445a7a1db51 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > @@ -58,12 +58,42 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > wifi_pwrseq: wifi_pwrseq { > compatible = "mmc-pwrseq-simple"; > reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ > }; > }; > > +&de { > + status = "okay"; > +}; > + > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&mixer1 { > + status = "okay"; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > @@ -218,6 +248,10 @@ > vcc-hdmi-supply = <®_dldo1>; > }; > > +&tcon1 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index > 1221764f5719..81a8f92c6c35 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > @@ -57,12 +57,42 @@ > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > +}; > + > +&de { > + status = "okay"; > }; > > &ehci1 { > status = "okay"; > }; > > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&mixer1 { > + status = "okay"; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > @@ -195,6 +225,10 @@ > vcc-hdmi-supply = <®_dldo1>; > }; > > +&tcon1 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index > 1b9b92e541d2..1b972bade9f6 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > @@ -62,6 +62,21 @@ > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > +}; > + > +&de { > + status = "okay"; > }; > > &ehci0 { > @@ -82,6 +97,17 @@ > > }; > > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &i2c1 { > pinctrl-names = "default"; > pinctrl-0 = <&i2c1_pins>; > @@ -99,6 +125,10 @@ > }; > }; > > +&mixer1 { > + status = "okay"; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > @@ -238,6 +268,10 @@ > status = "disabled"; > }; > > +&tcon1 { > + status = "okay"; > +}; > + > /* On Exp and Euler connectors */ > &uart0 { > pinctrl-names = "default"; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index > c21f2331add6..eff44b069b1d 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > @@ -61,6 +61,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > reg_vcc1v8: vcc1v8 { > compatible = "regulator-fixed"; > regulator-name = "vcc1v8"; > @@ -69,6 +80,10 @@ > }; > }; > > +&de { > + status = "okay"; > +}; > + > &ehci0 { > status = "okay"; > }; > @@ -86,6 +101,17 @@ > status = "okay"; > }; > > +&hdmi { > + hdmi-supply = <®_dldo1>; > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &mdio { > ext_rgmii_phy: ethernet-phy@1 { > compatible = "ethernet-phy-ieee802.3-c22"; > @@ -93,6 +119,10 @@ > }; > }; > > +&mixer1 { > + status = "okay"; > +}; > + > &mmc2 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > @@ -138,6 +168,10 @@ > vcc-hdmi-supply = <®_dldo1>; How is it possible to have vcc-hdmi-supply already defined? Did I miss some patch? Best regards, Jernej > }; > > +&tcon1 { > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>;