From: "Jeffrey J. Kosowsky" <jeff.kosowsky@verizon.net>
To: linux-kernel@vger.kernel.org
Subject: Scary SCSI disk error message
Date: Tue, 3 Sep 2002 00:25:09 -0400 [thread overview]
Message-ID: <15732.14757.772376.605776@surgeon.pretender> (raw)
I am running a pretty standard RH7.3 configuration (Kernel 2.4.18)
with root and key filesystems on a 20Gig EIDE disk.
I also have some older ext2 partitions (circa Kernel 2.0) on a 2Gig
SCSI running on an Adaptac 2490 adapter.
When I mount the SCSI ext2 partitions, everything works fine for a
while but then access to the partition freezes for several minutes
associated with the thousands of scary syslog messages (see below).
SCSI termination is done properly.
Also, it should be noted that the SCSI drive is *rock* solid when
booted under an old 2.0.28 kernel or when accessed from Win95. In
fact, just before the most recent incident, I had fuly fscked the old
Linux partitions (including the 'badblocks' option) under 2.0.28.
Any suggestions?
** Could you please copy me on an email response, since I do not (yet)
subscribe to the mailing list? . Thanks very much for your help.
--------
syslog extacts follow:
Sep 2 11:42:09 surgeon kernel: attempt to access beyond end of device
Sep 2 11:42:09 surgeon kernel: 08:02: rw=0, want=7053826, limit=32130
Sep 2 11:42:09 surgeon kernel: attempt to access beyond end of device
Sep 2 11:42:09 surgeon kernel: 08:02: rw=0, want=7054081, limit=32130
....
... (plus *thousands* more lines like this)
....
Sep 2 12:01:17 surgeon kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Sep 2 12:01:17 surgeon kernel: scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x79
Sep 2 12:01:17 surgeon kernel: ACCUM = 0x0, SINDEX = 0x8, DINDEX = 0x8f, ARG_2 = 0xff
Sep 2 12:01:17 surgeon kernel: HCNT = 0x18 SCBPTR = 0xd
Sep 2 12:01:17 surgeon kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 2 12:01:17 surgeon kernel: DFCNTRL = 0x78, DFSTATUS = 0x0
Sep 2 12:01:17 surgeon kernel: LASTPHASE = 0x40, SCSISIGI = 0x44, SXFRCTL0 = 0x80
Sep 2 12:01:17 surgeon kernel: SSTAT0 = 0x0, SSTAT1 = 0x2
Sep 2 12:01:17 surgeon kernel: STACK == 0x96, 0x186, 0x156, 0x0
Sep 2 12:01:17 surgeon kernel: SCB count = 60
Sep 2 12:01:17 surgeon kernel: Kernel NEXTQSCB = 34
Sep 2 12:01:17 surgeon kernel: Card NEXTQSCB = 39
Sep 2 12:01:17 surgeon kernel: QINFIFO entries: 39 31 45 9 52 46 54 50 10 33 28 29 35 32 43 47 40 19 13 6 55
Sep 2 12:01:17 surgeon kernel: Waiting Queue entries:
Sep 2 12:01:17 surgeon kernel: Disconnected Queue entries:
Sep 2 12:01:17 surgeon kernel: QOUTFIFO entries:
Sep 2 12:01:17 surgeon kernel: Sequencer Free SCB List: 3 7 1 11 4 0 8 9 15 12 2 14 6 5 10
Sep 2 12:01:17 surgeon kernel: Sequencer SCB Info: 0(c 0x60, s 0x7, l 0, t 0xff) 1(c 0x60, s 0x7, l 0, t 0xff) 2(c 0x60, s 0x7, l 0, t 0xff) 3(c 0x60, s 0x7, l 0, t 0xff) 4(c 0x60, s 0x7, l 0, t 0xff) 5(c 0x60, s 0x7, l 0, t 0xff) 6(c 0x60, s 0x7, l 0, t 0xff) 7(c 0x60, s 0x7, l 0, t 0xff) 8(c 0x60, s 0x7, l 0, t 0xff) 9(c 0x60, s 0x7, l 0, t 0xff) 10(c 0x60, s 0x7, l 0, t 0xff) 11(c 0x60, s 0x7, l 0, t 0xff) 12(c 0x60, s 0x7, l 0, t 0xff) 13(c 0x60, s 0x7, l 0, t 0x29) 14(c 0x60, s 0x7, l 0, t 0xff) 15(c 0x60, s 0x7, l 0, t 0xff)
Sep 2 12:01:17 surgeon kernel: Pending list: 55(c 0x60, s 0x7, l 0), 6(c 0x60, s 0x7, l 0), 13(c 0x60, s 0x7, l 0), 19(c 0x60, s 0x7, l 0), 40(c 0x60, s 0x7, l 0), 47(c 0x60, s 0x7, l 0), 43(c 0x60, s 0x7, l 0), 32(c 0x60, s 0x7, l 0), 35(c 0x60, s 0x7, l 0), 29(c 0x60, s 0x7, l 0), 28(c 0x60, s 0x7, l 0), 33(c 0x60, s 0x7, l 0), 10(c 0x60, s 0x7, l 0), 50(c 0x60, s 0x7, l 0), 54(c 0x60, s 0x7, l 0), 46(c 0x60, s 0x7, l 0), 52(c 0x60, s 0x7, l 0), 9(c 0x60, s 0x7, l 0), 45(c 0x60, s 0x7, l 0), 31(c 0x60, s 0x7, l 0), 39(c 0x60, s 0x7, l 0), 41(c 0x60, s 0x7, l 0)
Sep 2 12:01:17 surgeon kernel: Kernel Free SCB list: 1 44 48 51 36 37 38 49 42 11 27 2 0 16 3 12 25 17 53 59 58 22 23 4 8 24 57 7 30 26 5 21 15 14 20 18 56
Sep 2 12:01:17 surgeon kernel: DevQ(0:0:0): 0 waiting
Sep 2 12:01:17 surgeon kernel: DevQ(0:5:0): 0 waiting
Sep 2 12:01:17 surgeon kernel: DevQ(0:6:0): 0 waiting
Sep 2 12:01:17 surgeon kernel: scsi0:0:0:0: Cmd aborted from QINFIFO
Sep 2 12:01:17 surgeon kernel: aic7xxx_abort returns 0x2002
Sep 2 12:01:27 surgeon kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Sep 2 12:01:27 surgeon kernel: scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x7a
Sep 2 12:01:27 surgeon kernel: ACCUM = 0x0, SINDEX = 0x8, DINDEX = 0x8f, ARG_2 = 0xff
Sep 2 12:01:27 surgeon kernel: HCNT = 0x18 SCBPTR = 0xd
Sep 2 12:01:27 surgeon kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 2 12:01:27 surgeon kernel: DFCNTRL = 0x78, DFSTATUS = 0x0
Sep 2 12:01:27 surgeon kernel: LASTPHASE = 0x40, SCSISIGI = 0x44, SXFRCTL0 = 0x80
Sep 2 12:01:27 surgeon kernel: SSTAT0 = 0x0, SSTAT1 = 0x2
Sep 2 12:01:27 surgeon kernel: STACK == 0x96, 0x186, 0x156, 0x0
Sep 2 12:01:27 surgeon kernel: SCB count = 60
Sep 2 12:01:27 surgeon kernel: Kernel NEXTQSCB = 46
Sep 2 12:01:27 surgeon kernel: Card NEXTQSCB = 34
Sep 2 12:01:27 surgeon kernel: QINFIFO entries: 34 31 45 9 52 54 50 10 33 28 29 35 32 43 47 40 19 13 6 55 39
Sep 2 12:01:27 surgeon kernel: Waiting Queue entries:
Sep 2 12:01:27 surgeon kernel: Disconnected Queue entries:
Sep 2 12:01:27 surgeon kernel: QOUTFIFO entries:
Sep 2 12:01:27 surgeon kernel: Sequencer Free SCB List: 3 7 1 11 4 0 8 9 15 12 2 14 6 5 10
Sep 2 12:01:27 surgeon kernel: Sequencer SCB Info: 0(c 0x60, s 0x7, l 0, t 0xff) 1(c 0x60, s 0x7, l 0, t 0xff) 2(c 0x60, s 0x7, l 0, t 0xff) 3(c 0x60, s 0x7, l 0, t 0xff) 4(c 0x60, s 0x7, l 0, t 0xff) 5(c 0x60, s 0x7, l 0, t 0xff) 6(c 0x60, s 0x7, l 0, t 0xff) 7(c 0x60, s 0x7, l 0, t 0xff) 8(c 0x60, s 0x7, l 0, t 0xff) 9(c 0x60, s 0x7, l 0, t 0xff) 10(c 0x60, s 0x7, l 0, t 0xff) 11(c 0x60, s 0x7, l 0, t 0xff) 12(c 0x60, s 0x7, l 0, t 0xff) 13(c 0x60, s 0x7, l 0, t 0x29) 14(c 0x60, s 0x7, l 0, t 0xff) 15(c 0x60, s 0x7, l 0, t 0xff)
Sep 2 12:01:27 surgeon kernel: Pending list: 39(c 0x60, s 0x7, l 0), 55(c 0x60, s 0x7, l 0), 6(c 0x60, s 0x7, l 0), 13(c 0x60, s 0x7, l 0), 19(c 0x60, s 0x7, l 0), 40(c 0x60, s 0x7, l 0), 47(c 0x60, s 0x7, l 0), 43(c 0x60, s 0x7, l 0), 32(c 0x60, s 0x7, l 0), 35(c 0x60, s 0x7, l 0), 29(c 0x60, s 0x7, l 0), 28(c 0x60, s 0x7, l 0), 33(c 0x60, s 0x7, l 0), 10(c 0x60, s 0x7, l 0), 50(c 0x60, s 0x7, l 0), 54(c 0x60, s 0x7, l 0), 52(c 0x60, s 0x7, l 0), 9(c 0x60, s 0x7, l 0), 45(c 0x60, s 0x7, l 0), 31(c 0x60, s 0x7, l 0), 34(c 0x60, s 0x7, l 0), 41(c 0x60, s 0x7, l 0)
Sep 2 12:01:27 surgeon kernel: Kernel Free SCB list: 1 44 48 51 36 37 38 49 42 11 27 2 0 16 3 12 25 17 53 59 58 22 23 4 8 24 57 7 30 26 5 21 15 14 20 18 56
Sep 2 12:01:27 surgeon kernel: DevQ(0:0:0): 0 waiting
Sep 2 12:01:27 surgeon kernel: DevQ(0:5:0): 0 waiting
Sep 2 12:01:27 surgeon kernel: DevQ(0:6:0): 0 waiting
Sep 2 12:01:27 surgeon kernel: scsi0:0:0:0: Cmd aborted from QINFIFO
Sep 2 12:01:27 surgeon kernel: aic7xxx_abort returns 0x2002
Sep 2 12:01:27 surgeon kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Sep 2 12:01:27 surgeon kernel: scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x7a
Sep 2 12:01:27 surgeon kernel: ACCUM = 0x0, SINDEX = 0x8, DINDEX = 0x8f, ARG_2 = 0xff
Sep 2 12:01:27 surgeon kernel: HCNT = 0x18 SCBPTR = 0xd
Sep 2 12:01:27 surgeon kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Sep 2 12:01:27 surgeon kernel: DFCNTRL = 0x78, DFSTATUS = 0x0
Sep 2 12:01:27 surgeon kernel: LASTPHASE = 0x40, SCSISIGI = 0x44, SXFRCTL0 = 0x80
Sep 2 12:01:27 surgeon kernel: SSTAT0 = 0x0, SSTAT1 = 0x2
Sep 2 12:01:27 surgeon kernel: STACK == 0x96, 0x186, 0x156, 0x0
Sep 2 12:01:27 surgeon kernel: SCB count = 60
Sep 2 12:01:28 surgeon kernel: Kernel NEXTQSCB = 34
Sep 2 12:01:28 surgeon kernel: Card NEXTQSCB = 46
Sep 2 12:01:28 surgeon kernel: QINFIFO entries: 46 31 45 9 52 54 50 10 33 28 29 35 32 43 47 40 19 13 6 55
Sep 2 12:01:28 surgeon kernel: Waiting Queue entries:
Sep 2 12:01:28 surgeon kernel: Disconnected Queue entries:
Sep 2 12:01:28 surgeon kernel: QOUTFIFO entries:
Sep 2 12:01:28 surgeon kernel: Sequencer Free SCB List: 3 7 1 11 4 0 8 9 15 12 2 14 6 5 10
Sep 2 12:01:28 surgeon kernel: Sequencer SCB Info: 0(c 0x60, s 0x7, l 0, t 0xff) 1(c 0x60, s 0x7, l 0, t 0xff) 2(c 0x60, s 0x7, l 0, t 0xff) 3(c 0x60, s 0x7, l 0, t 0xff) 4(c 0x60, s 0x7, l 0, t 0xff) 5(c 0x60, s 0x7, l 0, t 0xff) 6(c 0x60, s 0x7, l 0, t 0xff) 7(c 0x60, s 0x7, l 0, t 0xff) 8(c 0x60, s 0x7, l 0, t 0xff) 9(c 0x60, s 0x7, l 0, t 0xff) 10(c 0x60, s 0x7, l 0, t 0xff) 11(c 0x60, s 0x7, l 0, t 0xff) 12(c 0x60, s 0x7, l 0, t 0xff) 13(c 0x60, s 0x7, l 0, t 0x29) 14(c 0x60, s 0x7, l 0, t 0xff) 15(c 0x60, s 0x7, l 0, t 0xff)
Sep 2 12:01:28 surgeon kernel: Pending list: 55(c 0x60, s 0x7, l 0), 6(c 0x60, s 0x7, l 0), 13(c 0x60, s 0x7, l 0), 19(c 0x60, s 0x7, l 0), 40(c 0x60, s 0x7, l 0), 47(c 0x60, s 0x7, l 0), 43(c 0x60, s 0x7, l 0), 32(c 0x60, s 0x7, l 0), 35(c 0x60, s 0x7, l 0), 29(c 0x60, s 0x7, l 0), 28(c 0x60, s 0x7, l 0), 33(c 0x60, s 0x7, l 0), 10(c 0x60, s 0x7, l 0), 50(c 0x60, s 0x7, l 0), 54(c 0x60, s 0x7, l 0), 52(c 0x60, s 0x7, l 0), 9(c 0x60, s 0x7, l 0), 45(c 0x60, s 0x7, l 0), 31(c 0x60, s 0x7, l 0), 46(c 0x60, s 0x7, l 0), 41(c 0x60, s 0x7, l 0)
Sep 2 12:01:28 surgeon kernel: Kernel Free SCB list: 39 1 44 48 51 36 37 38 49 42 11 27 2 0 16 3 12 25 17 53 59 58 22 23 4 8 24 57 7 30 26 5 21 15 14 20 18 56
Sep 2 12:01:28 surgeon kernel: DevQ(0:0:0): 0 waiting
Sep 2 12:01:28 surgeon kernel: DevQ(0:5:0): 0 waiting
Sep 2 12:01:28 surgeon kernel: DevQ(0:6:0): 0 waiting
Sep 2 12:01:28 surgeon kernel: scsi0:0:0:0: Cmd aborted from QINFIFO
Sep 2 12:01:28 surgeon kernel: aic7xxx_abort returns 0x2002
....
... (this cycle also repeats a few dozen times)
next reply other threads:[~2002-09-03 4:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-03 4:25 Jeffrey J. Kosowsky [this message]
2002-09-03 15:23 ` Thunder from the hill
2002-09-03 15:57 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15732.14757.772376.605776@surgeon.pretender \
--to=jeff.kosowsky@verizon.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®