From: Mikael Pettersson <mikpe@csd.uu.se>
To: Cajoline <cajoline@andaxin.gau.hu>
Cc: linux-kernel@vger.kernel.org
Subject: Re: ASUS TUSL2-C and Promise Ultra100 TX2
Date: Fri, 25 Oct 2002 16:01:12 +0200 [thread overview]
Message-ID: <15801.20136.556691.985301@kim.it.uu.se> (raw)
In-Reply-To: <Pine.LNX.4.44.0210251530530.4572-100000@andaxin.gau.hu>
Cajoline writes:
> I recently setup a box with the following components:
> Intel Celeron 1300 MHz
> ASUS TUSL2-C motherboard
> 2 x Promise Ultra100 TX2 controllers
Those have the 20268 chip, right?
> Any 2.4 kernel I have tried on this machine displays this strange
> behavior: any drives attached to the PDC controllers only work at udma
> mode 2 (UDMA33).
I've recently installed a Ultra133 TX2 (PDC 20269) in a box, and it
also only does UDMA33 in 2.4.20-pre11. 2.5.44 with the PDC driver
for "new" chips does UDMA100, however. (The disk is only UDMA100.)
The latest 2.4.20-pre-ac is supposed to have new IDE drivers, but
I haven't had time to test it myself.
> So I have come to the conclusion there must be some rather bizarre
> incompatibility between the PDCs and this motherboard.
Unlikely.
> Let me note that the PDC controllers do work just fine with other older
> motherboards. And another thing, during boot-up, the PDCs do show the
> drives attached to it, detected at the right udma mode.
Did those boards also use standard 2.4 kernels?
/Mikael
next prev parent reply other threads:[~2002-10-25 13:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-25 13:32 Cajoline
2002-10-25 14:01 ` Mikael Pettersson [this message]
2002-10-26 4:32 ` Cajoline
[not found] <008601c27c91$17671950$020da8c0@nitemare>
2002-10-26 1:59 ` Robbert Kouprie
2002-10-26 5:12 ` Cajoline
2002-10-26 14:38 ` Robbert Kouprie
2002-10-27 2:26 ` Cajoline
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15801.20136.556691.985301@kim.it.uu.se \
--to=mikpe@csd.uu.se \
--cc=cajoline@andaxin.gau.hu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®