From: Jolly Shah <jolly.shah@xilinx.com>
To: ard.biesheuvel@linaro.org, mingo@kernel.org,
gregkh@linuxfoundation.org, matt@codeblueprint.co.uk,
sudeep.holla@arm.com, hkallweit1@gmail.com,
keescook@chromium.org, dmitry.torokhov@gmail.com,
michal.simek@xilinx.com
Cc: rajanv@xilinx.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rajan Vaja <rajan.vaja@xilinx.com>,
Jolly Shah <jolly.shah@xilinx.com>
Subject: [PATCH v3 08/24] firmware: xilinx: Remove eemi ops for clock_getdivider
Date: Fri, 6 Mar 2020 15:47:16 -0800 [thread overview]
Message-ID: <1583538452-1992-9-git-send-email-jolly.shah@xilinx.com> (raw)
In-Reply-To: <1583538452-1992-1-git-send-email-jolly.shah@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Use direct function call instead of using eemi ops for
clock_getdivider.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
drivers/clk/zynqmp/divider.c | 6 ++----
drivers/clk/zynqmp/pll.c | 2 +-
drivers/firmware/xilinx/zynqmp.c | 4 ++--
include/linux/firmware/xlnx-zynqmp.h | 2 +-
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 13041cd..8eed715 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -83,9 +83,8 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
u32 div_type = divider->div_type;
u32 div, value;
int ret;
- const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
- ret = eemi_ops->clock_getdivider(clk_id, &div);
+ ret = zynqmp_pm_clock_getdivider(clk_id, &div);
if (ret)
pr_warn_once("%s() get divider failed for %s, ret = %d\n",
@@ -163,11 +162,10 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
u32 div_type = divider->div_type;
u32 bestdiv;
int ret;
- const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
/* if read only, just return current value */
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
- ret = eemi_ops->clock_getdivider(clk_id, &bestdiv);
+ ret = zynqmp_pm_clock_getdivider(clk_id, &bestdiv);
if (ret)
pr_warn_once("%s() get divider failed for %s, ret = %d\n",
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index 95fad06..73fb5bb 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -141,7 +141,7 @@ static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
int ret;
const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
- ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
+ ret = zynqmp_pm_clock_getdivider(clk_id, &fbdiv);
if (ret)
pr_warn_once("%s() get divider failed for %s, ret = %d\n",
__func__, clk_name, ret);
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index eb39735..2fc6e17 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -422,7 +422,7 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider);
*
* Return: Returns status, either success or error+reason
*/
-static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
{
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
@@ -433,6 +433,7 @@ static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
return ret;
}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider);
/**
* zynqmp_pm_clock_setrate() - Set the clock rate for given id
@@ -715,7 +716,6 @@ static int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
}
static const struct zynqmp_eemi_ops eemi_ops = {
- .clock_getdivider = zynqmp_pm_clock_getdivider,
.clock_setrate = zynqmp_pm_clock_setrate,
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 412b32f..b55232e 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -288,7 +288,6 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
int (*fpga_get_status)(u32 *value);
- int (*clock_getdivider)(u32 clock_id, u32 *divider);
int (*clock_setrate)(u32 clock_id, u64 rate);
int (*clock_getrate)(u32 clock_id, u64 *rate);
int (*clock_setparent)(u32 clock_id, u32 parent_id);
@@ -317,6 +316,7 @@ int zynqmp_pm_clock_enable(u32 clock_id);
int zynqmp_pm_clock_disable(u32 clock_id);
int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state);
int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider);
+int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider);
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
--
2.7.4
next prev parent reply other threads:[~2020-03-06 23:48 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 23:47 [PATCH v3 00/24] firmware: xilinx: Add xilinx specific sysfs interface Jolly Shah
2020-03-06 23:47 ` [PATCH v3 01/24] firmware: xilinx: Remove eemi ops for get_api_version Jolly Shah
2020-03-06 23:47 ` [PATCH v3 02/24] firmware: xilinx: Remove eemi ops for get_chipid Jolly Shah
2020-03-06 23:47 ` [PATCH v3 03/24] firmware: xilinx: Remove eemi ops for query_data Jolly Shah
2020-03-06 23:47 ` [PATCH v3 04/24] firmware: xilinx: Remove eemi ops for clock_enable Jolly Shah
2020-03-06 23:47 ` [PATCH v3 05/24] firmware: xilinx: Remove eemi ops for clock_disable Jolly Shah
2020-03-06 23:47 ` [PATCH v3 06/24] firmware: xilinx: Remove eemi ops for clock_getstate Jolly Shah
2020-03-06 23:47 ` [PATCH v3 07/24] firmware: xilinx: Remove eemi ops for clock_setdivider Jolly Shah
2020-03-06 23:47 ` Jolly Shah [this message]
2020-03-06 23:47 ` [PATCH v3 09/24] firmware: xilinx: Remove eemi ops for clock set/get rate Jolly Shah
2020-03-06 23:47 ` [PATCH v3 10/24] firmware: xilinx: Remove eemi ops for clock set/get parent Jolly Shah
2020-03-06 23:47 ` [PATCH v3 11/24] firmware: xilinx: Use APIs instead of IOCTLs Jolly Shah
2020-03-06 23:47 ` [PATCH v3 12/24] firmware: xilinx: Remove eemi ops for reset_assert Jolly Shah
2020-03-06 23:47 ` [PATCH v3 13/24] firmware: xilinx: Remove eemi ops for reset_get_status Jolly Shah
2020-03-06 23:47 ` [PATCH v3 14/24] firmware: xilinx: Remove eemi ops for init_finalize Jolly Shah
2020-03-06 23:47 ` [PATCH v3 15/24] firmware: xilinx: Remove eemi ops for set_suspend_mode Jolly Shah
2020-03-06 23:47 ` [PATCH v3 16/24] firmware: xilinx: Remove eemi ops for request_node Jolly Shah
2020-03-06 23:47 ` [PATCH v3 17/24] firmware: xilinx: Remove eemi ops for release_node Jolly Shah
2020-03-06 23:47 ` [PATCH v3 18/24] firmware: xilinx: Remove eemi ops for set_requirement Jolly Shah
2020-03-06 23:47 ` [PATCH v3 19/24] firmware: xilinx: Remove eemi ops for fpga related APIs Jolly Shah
2020-03-06 23:47 ` [PATCH v3 20/24] firmware: xilinx: Add APIs to read/write GGS/PGGS registers Jolly Shah
2020-03-18 11:51 ` Greg KH
2020-03-18 12:41 ` Rajan Vaja
2020-03-18 12:50 ` Greg KH
2020-03-06 23:47 ` [PATCH v3 21/24] firmware: xilinx: Add sysfs interface Jolly Shah
2020-03-18 11:51 ` Greg KH
2020-03-06 23:47 ` [PATCH v3 22/24] firmware: xilinx: Add system shutdown API interface Jolly Shah
2020-03-18 11:52 ` Greg KH
2020-03-06 23:47 ` [PATCH v3 23/24] firmware: xilinx: Add sysfs to set shutdown scope Jolly Shah
2020-03-18 11:53 ` Greg KH
2020-03-06 23:47 ` [PATCH v3 24/24] firmware: xilinx: Add sysfs and API to set boot health status Jolly Shah
2020-03-18 11:53 ` Greg KH
2020-03-18 11:54 ` [PATCH v3 00/24] firmware: xilinx: Add xilinx specific sysfs interface Greg KH
2020-04-09 19:17 ` Jolly Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1583538452-1992-9-git-send-email-jolly.shah@xilinx.com \
--to=jolly.shah@xilinx.com \
--cc=ard.biesheuvel@linaro.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=michal.simek@xilinx.com \
--cc=mingo@kernel.org \
--cc=rajan.vaja@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®