[PATCH] serial: amba-pl011: Support earlycon_kgdboc

[Sumit Garg <sumit.garg@linaro.org>]

Implement the read() function in the early console driver. With
recently added earlycon_kgdboc feature, this allows you to use kgdb
to debug fairly early into the system boot.

We only bother implementing this if polling is enabled since kgdb can't
be enabled without that.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---

Depends on kgdb patch series: https://lkml.org/lkml/2020/4/21/1179

 drivers/tty/serial/amba-pl011.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 2296bb0..c010f63 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2435,6 +2435,37 @@ static void pl011_early_write(struct console *con, const char *s, unsigned n)
 	uart_console_write(&dev->port, s, n, pl011_putc);
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int pl011_getc(struct uart_port *port)
+{
+	if (readl(port->membase + UART01x_FR) & UART01x_FR_RXFE)
+		return NO_POLL_CHAR;
+
+	if (port->iotype == UPIO_MEM32)
+		return readl(port->membase + UART01x_DR);
+	else
+		return readb(port->membase + UART01x_DR);
+}
+
+static int pl011_early_read(struct console *con, char *s, unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+	int ch, num_read = 0;
+
+	while (num_read < n) {
+		ch = pl011_getc(&dev->port);
+		if (ch == NO_POLL_CHAR)
+			break;
+
+		s[num_read++] = ch;
+	}
+
+	return num_read;
+}
+#else
+#define pl011_early_read NULL
+#endif
+
 /*
  * On non-ACPI systems, earlycon is enabled by specifying
  * "earlycon=pl011,<address>" on the kernel command line.
@@ -2454,6 +2485,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 		return -ENODEV;
 
 	device->con->write = pl011_early_write;
+	device->con->read = pl011_early_read;
 
 	return 0;
 }
-- 
2.7.4