[PATCH 14/18] spi: stm32: improve suspend/resume management

[Alain Volmat <alain.volmat@st.com>]

From: Amelie Delaunay <amelie.delaunay@st.com>

This patch adds pinctrl power management, and reconfigure spi controller
in case of resume.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 drivers/spi/spi-stm32.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index b0a9642392e9..0aec32538093 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -14,6 +14,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
@@ -2030,6 +2031,8 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
+	pinctrl_pm_select_sleep_state(&pdev->dev);
+
 	return 0;
 }
 
@@ -2041,13 +2044,18 @@ static int stm32_spi_runtime_suspend(struct device *dev)
 
 	clk_disable_unprepare(spi->clk);
 
-	return 0;
+	return pinctrl_pm_select_sleep_state(dev);
 }
 
 static int stm32_spi_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
 
 	return clk_prepare_enable(spi->clk);
 }
@@ -2077,10 +2085,23 @@ static int stm32_spi_resume(struct device *dev)
 		return ret;
 
 	ret = spi_master_resume(master);
-	if (ret)
+	if (ret) {
 		clk_disable_unprepare(spi->clk);
+		return ret;
+	}
 
-	return ret;
+	ret = pm_runtime_get_sync(dev);
+	if (ret) {
+		dev_err(dev, "Unable to power device:%d\n", ret);
+		return ret;
+	}
+
+	spi->cfg->config(spi);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
 }
 #endif
 
-- 
2.7.4