[tip: x86/cpu] x86/cpu: Use SERIALIZE in sync_core() when available

["tip-bot2 for Ricardo Neri" <tip-bot2@linutronix.de>]

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     bf9c912f9a649776c2d741310486a6984edaac72
Gitweb:        https://git.kernel.org/tip/bf9c912f9a649776c2d741310486a6984edaac72
Author:        Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
AuthorDate:    Thu, 06 Aug 2020 20:28:33 -07:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Mon, 17 Aug 2020 17:23:04 +02:00

x86/cpu: Use SERIALIZE in sync_core() when available

The SERIALIZE instruction gives software a way to force the processor to
complete all modifications to flags, registers and memory from previous
instructions and drain all buffered writes to memory before the next
instruction is fetched and executed. Thus, it serves the purpose of
sync_core(). Use it when available.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200807032833.17484-1-ricardo.neri-calderon@linux.intel.com
---
 arch/x86/include/asm/special_insns.h |  6 ++++++
 arch/x86/include/asm/sync_core.h     | 26 ++++++++++++++++++--------
 2 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 59a3e13..5999b0b 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -234,6 +234,12 @@ static inline void clwb(volatile void *__p)
 
 #define nop() asm volatile ("nop")
 
+static inline void serialize(void)
+{
+	/* Instruction opcode for SERIALIZE; supported in binutils >= 2.35. */
+	asm volatile(".byte 0xf, 0x1, 0xe8" ::: "memory");
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_X86_SPECIAL_INSNS_H */
diff --git a/arch/x86/include/asm/sync_core.h b/arch/x86/include/asm/sync_core.h
index fdb5b35..4631c0f 100644
--- a/arch/x86/include/asm/sync_core.h
+++ b/arch/x86/include/asm/sync_core.h
@@ -5,6 +5,7 @@
 #include <linux/preempt.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
+#include <asm/special_insns.h>
 
 #ifdef CONFIG_X86_32
 static inline void iret_to_self(void)
@@ -54,14 +55,23 @@ static inline void iret_to_self(void)
 static inline void sync_core(void)
 {
 	/*
-	 * There are quite a few ways to do this.  IRET-to-self is nice
-	 * because it works on every CPU, at any CPL (so it's compatible
-	 * with paravirtualization), and it never exits to a hypervisor.
-	 * The only down sides are that it's a bit slow (it seems to be
-	 * a bit more than 2x slower than the fastest options) and that
-	 * it unmasks NMIs.  The "push %cs" is needed because, in
-	 * paravirtual environments, __KERNEL_CS may not be a valid CS
-	 * value when we do IRET directly.
+	 * The SERIALIZE instruction is the most straightforward way to
+	 * do this but it not universally available.
+	 */
+	if (static_cpu_has(X86_FEATURE_SERIALIZE)) {
+		serialize();
+		return;
+	}
+
+	/*
+	 * For all other processors, there are quite a few ways to do this.
+	 * IRET-to-self is nice because it works on every CPU, at any CPL
+	 * (so it's compatible with paravirtualization), and it never exits
+	 * to a hypervisor. The only down sides are that it's a bit slow
+	 * (it seems to be a bit more than 2x slower than the fastest
+	 * options) and that it unmasks NMIs.  The "push %cs" is needed
+	 * because, in paravirtual environments, __KERNEL_CS may not be a
+	 * valid CS value when we do IRET directly.
 	 *
 	 * In case NMI unmasking or performance ever becomes a problem,
 	 * the next best option appears to be MOV-to-CR2 and an