From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-kernel@vger.kernel.org>,
<linux-scsi@vger.kernel.org>,
Xiang Chen <chenxiang66@hisilicon.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 7/8] scsi: hisi_sas: Add carriage returns to some prints
Date: Tue, 1 Sep 2020 19:13:09 +0800 [thread overview]
Message-ID: <1598958790-232272-8-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1598958790-232272-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
There is no carriage return for some prints, so add carriage returns for
them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 24 ++++++++++++------------
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
4 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 6d1e42389cd6..f5ad8e662b4b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -335,7 +335,7 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
}
if (*n_elem > HISI_SAS_SGE_PAGE_CNT) {
- dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+ dev_err(dev, "task prep: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT\n",
*n_elem);
rc = -EINVAL;
goto err_out_dma_unmap;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 7922a9bb1b28..45e866cb9164 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -752,7 +752,7 @@ static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v1_hw(hisi_hba);
if (rc) {
- dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
@@ -1166,7 +1166,7 @@ static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
{
- dev_err(dev, "slot err: SATA/STP not supported");
+ dev_err(dev, "slot err: SATA/STP not supported\n");
}
break;
default:
@@ -1218,35 +1218,35 @@ static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq IPTT err",
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq type err",
+ dev_err(dev, "slot complete: [%d:%d] has dq type err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq force phy err",
+ dev_err(dev, "slot complete: [%d:%d] has dq force phy err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq phy id err",
+ dev_err(dev, "slot complete: [%d:%d] has dq phy id err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq abort flag err",
+ dev_err(dev, "slot complete: [%d:%d] has dq abort flag err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err",
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err",
+ dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
- dev_err(dev, "slot complete: [%d:%d] has dq order frame len err",
+ dev_err(dev, "slot complete: [%d:%d] has dq order frame len err\n",
slot->cmplt_queue, slot->cmplt_queue_slot);
ts->stat = SAS_OPEN_REJECT;
@@ -1294,7 +1294,7 @@ static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- dev_err(dev, "slot complete: SATA/STP not supported");
+ dev_err(dev, "slot complete: SATA/STP not supported\n");
break;
default:
@@ -1417,7 +1417,7 @@ static irqreturn_t int_bcast_v1_hw(int irq, void *p)
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
- dev_err(dev, "bcast: irq_value = %x not set enable bit",
+ dev_err(dev, "bcast: irq_value = %x not set enable bit\n",
irq_value);
res = IRQ_NONE;
goto end;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 043f47ba3600..68d07a4f8422 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1382,7 +1382,7 @@ static int hw_init_v2_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v2_hw(hisi_hba);
if (rc) {
- dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 8522f693033f..397846388e85 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -909,7 +909,7 @@ static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
rc = reset_hw_v3_hw(hisi_hba);
if (rc) {
- dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
return rc;
}
--
2.26.2
next prev parent reply other threads:[~2020-09-01 11:43 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 11:13 [PATCH 0/8] hisi_sas: Misc patches John Garry
2020-09-01 11:13 ` [PATCH 1/8] scsi: hisi_sas: Avoid accessing to SSP task for SMP IOs John Garry
2020-09-01 11:13 ` [PATCH 2/8] scsi: hisi_sas: Modify macro name for OOB phy linkrate John Garry
2020-09-01 11:13 ` [PATCH 3/8] scsi: hisi_sas: Do not modify upper fields of PROG_PHY_LINK_RATE reg John Garry
2020-09-01 11:13 ` [PATCH 4/8] scsi: hisi_sas: Make phy index variable name consistent John Garry
2020-09-01 11:13 ` [PATCH 5/8] scsi: hisi_sas: Add BIST support for phy FFE John Garry
2020-09-01 11:13 ` [PATCH 6/8] scsi: hisi_sas: Add BIST support for fixed code pattern John Garry
2020-09-01 11:13 ` John Garry [this message]
2020-09-01 11:13 ` [PATCH 8/8] scsi: hisi_sas: Some very minor tidying John Garry
2020-09-09 2:09 ` [PATCH 0/8] hisi_sas: Misc patches Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1598958790-232272-8-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®