From: Marcelo Schmitt <marcelo.schmitt@analog.com>
To: <apw@canonical.com>, <joe@perches.com>, <dwaipayanray1@gmail.com>,
<lukas.bulwahn@gmail.com>, <paul.cercueil@analog.com>,
<Michael.Hennerich@analog.com>, <lars@metafoo.de>,
<jic23@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<dan.carpenter@linaro.org>, <dlechner@baylibre.com>,
<marcelo.schmitt1@gmail.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 08/15] iio: adc: ad7091r: Set device mode through chip_info callback
Date: Sat, 16 Dec 2023 14:48:48 -0300 [thread overview]
Message-ID: <15b84bc156f329d74be2d83d547ad7e75fead4c2.1702746240.git.marcelo.schmitt1@gmail.com> (raw)
In-Reply-To: <cover.1702746240.git.marcelo.schmitt1@gmail.com>
AD7091R-5 devices have a few modes of operation (sample, command,
autocycle) which are set by writing to configuration register fields.
Follow up patches will add support for AD7091R-2/-4/-8 which don't have
those operation modes nor the register fields for setting them.
Make ad7091r_set_mode() a callback function of AD7091R chip_info struct
so the base driver can appropriately handle each design without having
to check which actual chip is connected.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
drivers/iio/adc/ad7091r-base.c | 38 +---------------------------------
drivers/iio/adc/ad7091r-base.h | 9 ++++++++
drivers/iio/adc/ad7091r5.c | 30 +++++++++++++++++++++++++++
3 files changed, 40 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index ed98729baf43..aead72ef55b6 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -19,14 +19,6 @@
#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3)
#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
-/* AD7091R_REG_CONF */
-#define AD7091R_REG_CONF_ALERT_EN BIT(4)
-#define AD7091R_REG_CONF_AUTO BIT(8)
-#define AD7091R_REG_CONF_CMD BIT(10)
-
-#define AD7091R_REG_CONF_MODE_MASK \
- (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
-
const struct iio_event_spec ad7091r_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -48,34 +40,6 @@ const struct iio_event_spec ad7091r_events[] = {
};
EXPORT_SYMBOL_NS_GPL(ad7091r_events, IIO_AD7091R);
-static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
-{
- int ret, conf;
-
- switch (mode) {
- case AD7091R_MODE_SAMPLE:
- conf = 0;
- break;
- case AD7091R_MODE_COMMAND:
- conf = AD7091R_REG_CONF_CMD;
- break;
- case AD7091R_MODE_AUTOCYCLE:
- conf = AD7091R_REG_CONF_AUTO;
- break;
- default:
- return -EINVAL;
- }
-
- ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
- AD7091R_REG_CONF_MODE_MASK, conf);
- if (ret)
- return ret;
-
- st->mode = mode;
-
- return 0;
-}
-
static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
{
unsigned int dummy;
@@ -264,7 +228,7 @@ int ad7091r_probe(struct device *dev, const struct ad7091r_init_info *init_info,
}
/* Use command mode by default to convert only desired channels*/
- ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
+ ret = st->chip_info->set_mode(st, AD7091R_MODE_COMMAND);
if (ret)
return ret;
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
index 3b3c81904ac2..81b8a4bbb929 100644
--- a/drivers/iio/adc/ad7091r-base.h
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -19,6 +19,14 @@
#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
+/* AD7091R_REG_CONF */
+#define AD7091R_REG_CONF_ALERT_EN BIT(4)
+#define AD7091R_REG_CONF_AUTO BIT(8)
+#define AD7091R_REG_CONF_CMD BIT(10)
+
+#define AD7091R_REG_CONF_MODE_MASK \
+ (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
+
#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
.type = IIO_VOLTAGE, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
@@ -53,6 +61,7 @@ struct ad7091r_chip_info {
unsigned int num_channels;
const struct iio_chan_spec *channels;
unsigned int vref_mV;
+ int (*set_mode)(struct ad7091r_state *st, enum ad7091r_mode mode);
};
struct ad7091r_init_info {
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
index 2872b6a0bae7..08f4b9717329 100644
--- a/drivers/iio/adc/ad7091r5.c
+++ b/drivers/iio/adc/ad7091r5.c
@@ -26,11 +26,40 @@ static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
AD7091R_CHANNEL(3, 12, NULL, 0),
};
+static int ad7091r5_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
+{
+ int ret, conf;
+
+ switch (mode) {
+ case AD7091R_MODE_SAMPLE:
+ conf = 0;
+ break;
+ case AD7091R_MODE_COMMAND:
+ conf = AD7091R_REG_CONF_CMD;
+ break;
+ case AD7091R_MODE_AUTOCYCLE:
+ conf = AD7091R_REG_CONF_AUTO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+ AD7091R_REG_CONF_MODE_MASK, conf);
+ if (ret)
+ return ret;
+
+ st->mode = mode;
+
+ return 0;
+}
+
static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
.name = "ad7091r-5",
.channels = ad7091r5_channels_irq,
.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
.vref_mV = 2500,
+ .set_mode = &ad7091r5_set_mode,
};
static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
@@ -38,6 +67,7 @@ static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
.channels = ad7091r5_channels_noirq,
.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
.vref_mV = 2500,
+ .set_mode = &ad7091r5_set_mode,
};
static const struct regmap_config ad7091r_regmap_config = {
--
2.42.0
next prev parent reply other threads:[~2023-12-16 17:49 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-16 17:44 [PATCH v4 00/15] Add support for AD7091R-2/-4/-8 Marcelo Schmitt
2023-12-16 17:45 ` [PATCH v4 01/15] scripts: checkpatch: Add __aligned to the list of attribute notes Marcelo Schmitt
2023-12-16 18:07 ` Joe Perches
2023-12-17 14:51 ` Jonathan Cameron
2023-12-16 17:46 ` [PATCH v4 02/15] iio: adc: ad7091r: Pass iio_dev to event handler Marcelo Schmitt
2023-12-17 14:53 ` Jonathan Cameron
2023-12-16 17:46 ` [PATCH v4 03/15] iio: adc: ad7091r: Set alert bit in config register Marcelo Schmitt
2023-12-17 14:55 ` Jonathan Cameron
2023-12-18 17:22 ` Marcelo Schmitt
2023-12-16 17:47 ` [PATCH v4 04/15] iio: adc: ad7091r: Align arguments to function call parenthesis Marcelo Schmitt
2023-12-17 14:57 ` Jonathan Cameron
2023-12-16 17:47 ` [PATCH v4 05/15] iio: adc: ad7091r: Move generic AD7091R code to base driver and header file Marcelo Schmitt
2023-12-17 14:59 ` Jonathan Cameron
2023-12-16 17:47 ` [PATCH v4 06/15] iio: adc: ad7091r: Move chip init data to container struct Marcelo Schmitt
2023-12-17 13:04 ` [PATCH v4 6/15] " kernel test robot
2023-12-17 14:48 ` Jonathan Cameron
2023-12-16 17:48 ` [PATCH v4 07/15] iio: adc: ad7091r: Remove unneeded probe parameters Marcelo Schmitt
2023-12-16 17:48 ` Marcelo Schmitt [this message]
2023-12-16 17:49 ` [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied Marcelo Schmitt
2023-12-17 15:41 ` Jonathan Cameron
2023-12-18 17:35 ` Marcelo Schmitt
2023-12-20 14:04 ` Jonathan Cameron
2023-12-18 0:36 ` David Lechner
2023-12-18 17:42 ` Marcelo Schmitt
2023-12-16 17:49 ` [PATCH v4 10/15] iio: adc: ad7091r: Add chip_info callback to get conversion result channel Marcelo Schmitt
2023-12-16 17:49 ` [PATCH v4 11/15] iio: adc: Split AD7091R-5 config symbol Marcelo Schmitt
2023-12-16 17:50 ` [PATCH v4 12/15] dt-bindings: iio: Add AD7091R-8 Marcelo Schmitt
2023-12-16 23:55 ` Conor Dooley
2023-12-16 17:50 ` [PATCH v4 13/15] iio: adc: Add support for AD7091R-8 Marcelo Schmitt
2023-12-17 15:46 ` Jonathan Cameron
2023-12-16 17:51 ` [PATCH v4 14/15] MAINTAINERS: Add MAINTAINERS entry for AD7091R Marcelo Schmitt
2023-12-16 17:51 ` [PATCH v4 15/15] iio: adc: ad7091r: Allow users to configure device events Marcelo Schmitt
2023-12-17 15:54 ` Jonathan Cameron
2023-12-17 23:58 ` David Lechner
2023-12-18 0:10 ` David Lechner
2023-12-18 0:30 ` David Lechner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15b84bc156f329d74be2d83d547ad7e75fead4c2.1702746240.git.marcelo.schmitt1@gmail.com \
--to=marcelo.schmitt@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=apw@canonical.com \
--cc=conor+dt@kernel.org \
--cc=dan.carpenter@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=dwaipayanray1@gmail.com \
--cc=jic23@kernel.org \
--cc=joe@perches.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas.bulwahn@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=paul.cercueil@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®