Re: 2.4.2[01] i386 does not reenable local apic

[mikpe@csd.uu.se]

Keith Owens writes:
 > arc/i386/kernel/apic.c::detect_init_APIC()
 > 
 > 	switch (boot_cpu_data.x86_vendor) {
 > 	case X86_VENDOR_AMD:
 > 		if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1)
 > 			break;
 > 		if (boot_cpu_data.x86 == 15 && cpu_has_apic)
 > 			break;
 > 		goto no_apic;
 > 	case X86_VENDOR_INTEL:
 > 		if (boot_cpu_data.x86 == 6 ||
 > 		    (boot_cpu_data.x86 == 15 && cpu_has_apic) ||
 > 		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
 > 			break;
 > 		goto no_apic;
 > 	default:
 > 		goto no_apic;
 > 	}
 > 
 > 	if (!cpu_has_apic) {
 > 		/*
 > 		 * Some BIOSes disable the local APIC in the
 > 		 * APIC_BASE MSR. This can only be done in
 > 		 * software for Intel P6 and AMD K7 (Model > 1).
 > 		 */
 > 		rdmsr(MSR_IA32_APICBASE, l, h);
 > 		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
 > 			printk("Local APIC disabled by BIOS -- reenabling.\n");
 > 			l &= ~MSR_IA32_APICBASE_BASE;
 > 			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
 > 			wrmsr(MSR_IA32_APICBASE, l, h);
 > 		}
 > 	}
 > 
 > Because boot_cpu_data.x86 == 15 and the local APIC is disabled in BIOS,
 > detect_init_APIC() skips the code that reenables the local APIC.  This
 > test is back to front.  Change the code to force X86_VENDOR_INTEL to
 > drop through and it successfully reenables the local apic, I even get
 > NMI events.

The correct fix is to delete the "&& cpu_has_apic" test for family 15
CPUs. Simply falling through for VENDOR_INTEL will oops UP P5s.

I've seen a few P4 owners being caught by this. OTOH, several of those
had crap BIOSen that caused hangs with local APIC enabled.

I'll do a patch for 2.4.22-pre, if we ever actually get a 2.4.21 final...

/Mikael