From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265178AbTFRMME (ORCPT ); Wed, 18 Jun 2003 08:12:04 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265179AbTFRMME (ORCPT ); Wed, 18 Jun 2003 08:12:04 -0400 Received: from meryl.it.uu.se ([130.238.12.42]:2970 "EHLO meryl.it.uu.se") by vger.kernel.org with ESMTP id S265178AbTFRMMC (ORCPT ); Wed, 18 Jun 2003 08:12:02 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <16112.23126.341995.691398@gargle.gargle.HOWL> Date: Wed, 18 Jun 2003 14:25:58 +0200 From: mikpe@csd.uu.se To: linux-kernel@vger.kernel.org Subject: Cardbus/3c575 hotplugging dysfunctional in 2.5.72 X-Mailer: VM 6.90 under Emacs 20.7.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org With 2.5.72, my laptop with a Cardbus 3c575 NIC and RH9 user-space (hotplug-2002_04_01-17 and kernel-pcmcia-cs-3.1.31-13) no longer brings eth0 up automatically on insertion of the NIC. cardmgr _is_ running. A manual ifup eth0 brings it up however. This all worked fine up to 2.5.71. The only relevant diff in the dmesg logs is: --- dmesg-2.5.71 2003-06-18 14:17:44.000000000 +0200 +++ dmesg-2.5.72 2003-06-18 14:17:52.000000000 +0200 @@ -3,4 +3,3 @@ 05:00.0: 3Com PCI 3c575 Boomerang CardBus at 0x1800. Vers LK1.1.19 PCI: Setting latency timer of device 05:00.0 to 64 eth0: Dropping NETIF_F_SG since no checksum feature. -eth0: Setting full-duplex based on MII #0 link partner capability of 01e1. 2.5.72 discovers the device, the 100Mbps link led on the NIC lights up, but nothing further happens. Any ideas? /Mikael