[net-next PATCH 0/7] ethtool support for fec and link configuration

[Hariprasad Kelam <hkelam@marvell.com>]

This series of patches add support for forward error correction(fec) and
physical link configuration. Patches 1&2 adds necessary mbox handlers
for fec mode configuration request and to fetch stats. Patch 3 registers
driver callbacks for fec mode configuration and display. Patch 4&5 adds
support of mbox handlers for configuring link parameters like speed/duplex
and autoneg etc. Patche 6&7 registers driver callbacks for physical link
configuration.

Christina Jacob (6):
  octeontx2-af: forward error correction configuration
  octeontx2-pf: ethtool fec mode support
  octeontx2-af: Physical link configuration support
  octeontx2-af: advertised link modes support on cgx
  octeontx2-pf: ethtool physical link status
  octeontx2-pf: ethtool physical link configuration

Felix Manlunas (1):
  octeontx2-af: Add new CGX_CMD to get PHY FEC statistics

 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    | 254 +++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/cgx.h    |  10 +
 .../net/ethernet/marvell/octeontx2/af/cgx_fw_if.h  |  70 +++-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  87 ++++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |   4 +
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |  84 +++++
 .../ethernet/marvell/octeontx2/nic/otx2_common.c   |  23 ++
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |   6 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  | 390 ++++++++++++++++++++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |   3 +
 10 files changed, 924 insertions(+), 7 deletions(-)

--
2.7.4