From: "tip-bot2 for Joerg Roedel" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>, Borislav Petkov <bp@suse.de>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: x86/seves] x86/sev-es: Optimize __sev_es_ist_enter() for better readability
Date: Fri, 19 Mar 2021 13:17:50 -0000 [thread overview]
Message-ID: <161615987012.398.914043660944501718.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20210303141716.29223-4-joro@8bytes.org>
The following commit has been merged into the x86/seves branch of tip:
Commit-ID: 799de1baaf3509a54ff713efb768020f8defd709
Gitweb: https://git.kernel.org/tip/799de1baaf3509a54ff713efb768020f8defd709
Author: Joerg Roedel <jroedel@suse.de>
AuthorDate: Wed, 03 Mar 2021 15:17:14 +01:00
Committer: Borislav Petkov <bp@suse.de>
CommitterDate: Fri, 19 Mar 2021 13:37:22 +01:00
x86/sev-es: Optimize __sev_es_ist_enter() for better readability
Reorganize the code and improve the comments to make the function more
readable and easier to understand.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210303141716.29223-4-joro@8bytes.org
---
arch/x86/kernel/sev-es.c | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c
index 225704e..26f5479 100644
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -137,29 +137,41 @@ static __always_inline bool on_vc_stack(struct pt_regs *regs)
}
/*
- * This function handles the case when an NMI is raised in the #VC exception
- * handler entry code. In this case, the IST entry for #VC must be adjusted, so
- * that any subsequent #VC exception will not overwrite the stack contents of the
- * interrupted #VC handler.
+ * This function handles the case when an NMI is raised in the #VC
+ * exception handler entry code, before the #VC handler has switched off
+ * its IST stack. In this case, the IST entry for #VC must be adjusted,
+ * so that any nested #VC exception will not overwrite the stack
+ * contents of the interrupted #VC handler.
*
* The IST entry is adjusted unconditionally so that it can be also be
- * unconditionally adjusted back in sev_es_ist_exit(). Otherwise a nested
- * sev_es_ist_exit() call may adjust back the IST entry too early.
+ * unconditionally adjusted back in __sev_es_ist_exit(). Otherwise a
+ * nested sev_es_ist_exit() call may adjust back the IST entry too
+ * early.
+ *
+ * The __sev_es_ist_enter() and __sev_es_ist_exit() functions always run
+ * on the NMI IST stack, as they are only called from NMI handling code
+ * right now.
*/
void noinstr __sev_es_ist_enter(struct pt_regs *regs)
{
unsigned long old_ist, new_ist;
/* Read old IST entry */
- old_ist = __this_cpu_read(cpu_tss_rw.x86_tss.ist[IST_INDEX_VC]);
+ new_ist = old_ist = __this_cpu_read(cpu_tss_rw.x86_tss.ist[IST_INDEX_VC]);
- /* Make room on the IST stack */
+ /*
+ * If NMI happened while on the #VC IST stack, set the new IST
+ * value below regs->sp, so that the interrupted stack frame is
+ * not overwritten by subsequent #VC exceptions.
+ */
if (on_vc_stack(regs))
- new_ist = ALIGN_DOWN(regs->sp, 8) - sizeof(old_ist);
- else
- new_ist = old_ist - sizeof(old_ist);
+ new_ist = regs->sp;
- /* Store old IST entry */
+ /*
+ * Reserve additional 8 bytes and store old IST value so this
+ * adjustment can be unrolled in __sev_es_ist_exit().
+ */
+ new_ist -= sizeof(old_ist);
*(unsigned long *)new_ist = old_ist;
/* Set new IST entry */
next prev parent reply other threads:[~2021-03-19 13:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 14:17 [PATCH 0/5 v2] x86/sev-es: SEV-ES Fixes for v5.12 Joerg Roedel
2021-03-03 14:17 ` [PATCH 1/5] x86/sev-es: Introduce ip_within_syscall_gap() helper Joerg Roedel
2021-03-09 16:08 ` [tip: x86/urgent] " tip-bot2 for Joerg Roedel
2021-03-03 14:17 ` [PATCH 2/5] x86/sev-es: Check if regs->sp is trusted before adjusting #VC IST stack Joerg Roedel
2021-03-09 16:08 ` [tip: x86/urgent] x86/sev-es: Check " tip-bot2 for Joerg Roedel
2021-03-03 14:17 ` [PATCH 3/5] x86/sev-es: Optimize __sev_es_ist_enter() for better readability Joerg Roedel
2021-03-19 13:17 ` tip-bot2 for Joerg Roedel [this message]
2021-03-03 14:17 ` [PATCH 4/5] x86/sev-es: Correctly track IRQ states in runtime #VC handler Joerg Roedel
2021-03-09 16:08 ` [tip: x86/urgent] " tip-bot2 for Joerg Roedel
2021-03-03 14:17 ` [PATCH 5/5] x86/sev-es: Use __copy_from_user_inatomic() Joerg Roedel
2021-03-09 16:08 ` [tip: x86/urgent] " tip-bot2 for Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161615987012.398.914043660944501718.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=bp@suse.de \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®