From: Hui Tang <tanghui20@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Hui Tang <tanghui20@huawei.com>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: [PATCH 14/20] net: sis: remove leading spaces before tabs
Date: Wed, 19 May 2021 13:30:47 +0800 [thread overview]
Message-ID: <1621402253-27200-15-git-send-email-tanghui20@huawei.com> (raw)
In-Reply-To: <1621402253-27200-1-git-send-email-tanghui20@huawei.com>
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
drivers/net/ethernet/sis/sis900.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 620c26f..ca9c00b 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -678,12 +678,12 @@ static int sis900_mii_probe(struct net_device *net_dev)
/* Reset phy if default phy is internal sis900 */
if ((sis_priv->mii->phy_id0 == 0x001D) &&
((sis_priv->mii->phy_id1&0xFFF0) == 0x8000))
- status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
+ status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
/* workaround for ICS1893 PHY */
if ((sis_priv->mii->phy_id0 == 0x0015) &&
((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
- mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
+ mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
if(status & MII_STAT_LINK){
while (poll_bit) {
@@ -727,7 +727,7 @@ static int sis900_mii_probe(struct net_device *net_dev)
static u16 sis900_default_phy(struct net_device * net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
- struct mii_phy *phy = NULL, *phy_home = NULL,
+ struct mii_phy *phy = NULL, *phy_home = NULL,
*default_phy = NULL, *phy_lan = NULL;
u16 status;
@@ -1339,18 +1339,18 @@ static void sis900_timer(struct timer_list *t)
} else {
/* Link ON -> OFF */
if (!(status & MII_STAT_LINK)){
- netif_carrier_off(net_dev);
+ netif_carrier_off(net_dev);
if(netif_msg_link(sis_priv))
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
- /* Change mode issue */
- if ((mii_phy->phy_id0 == 0x001D) &&
- ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
- sis900_reset_phy(net_dev, sis_priv->cur_phy);
+ /* Change mode issue */
+ if ((mii_phy->phy_id0 == 0x001D) &&
+ ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
+ sis900_reset_phy(net_dev, sis_priv->cur_phy);
sis630_set_eq(net_dev, sis_priv->chipset_rev);
- goto LookForLink;
+ goto LookForLink;
}
}
@@ -2331,7 +2331,7 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map)
case IF_PORT_10BASE2: /* 10Base2 */
case IF_PORT_AUI: /* AUI */
case IF_PORT_100BASEFX: /* 100BaseFx */
- /* These Modes are not supported (are they?)*/
+ /* These Modes are not supported (are they?)*/
return -EOPNOTSUPP;
default:
--
2.8.1
next prev parent reply other threads:[~2021-05-19 5:39 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 5:30 [PATCH 00/20] net: ethernet: " Hui Tang
2021-05-19 5:30 ` [PATCH 01/20] net: 3com: " Hui Tang
2021-05-19 5:30 ` [PATCH 02/20] net: alteon: " Hui Tang
2021-05-19 5:30 ` [PATCH 03/20] net: amd: " Hui Tang
2021-05-19 5:30 ` [PATCH 04/20] net: apple: " Hui Tang
2021-05-19 5:30 ` [PATCH 05/20] net: broadcom: " Hui Tang
2021-05-19 5:30 ` [PATCH 06/20] net: chelsio: " Hui Tang
2021-05-19 5:30 ` [PATCH 07/20] net: dec: " Hui Tang
2021-05-19 5:30 ` [PATCH 08/20] net: dlink: " Hui Tang
2021-05-19 5:30 ` [PATCH 09/20] net: ibm: " Hui Tang
2021-05-19 6:04 ` Lijun Pan
2021-05-19 5:30 ` [PATCH 10/20] net: marvell: " Hui Tang
2021-05-19 5:30 ` [PATCH 11/20] net: natsemi: " Hui Tang
2021-05-19 5:30 ` [PATCH 12/20] net: realtek: " Hui Tang
2021-05-19 5:30 ` [PATCH 13/20] net: seeq: " Hui Tang
2021-05-19 5:30 ` Hui Tang [this message]
2021-05-19 5:30 ` [PATCH 15/20] net: smsc: " Hui Tang
2021-05-19 5:30 ` [PATCH 16/20] net: sun: " Hui Tang
2021-05-19 5:30 ` [PATCH 17/20] net: fealnx: " Hui Tang
2021-05-19 5:30 ` [PATCH 18/20] net: xircom: " Hui Tang
2021-05-19 5:30 ` [PATCH 19/20] net: 8390: " Hui Tang
2021-05-19 5:30 ` [PATCH 20/20] net: fujitsu: " Hui Tang
2021-05-19 6:06 ` [PATCH 00/20] net: ethernet: " Lijun Pan
2021-05-19 19:21 ` David Miller
2021-05-19 19:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621402253-27200-15-git-send-email-tanghui20@huawei.com \
--to=tanghui20@huawei.com \
--cc=davem@davemloft.net \
--cc=gustavoars@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®