From: Hui Tang <tanghui20@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<tanghui20@huawei.com>, Xie He <xie.he.0141@gmail.com>
Subject: [PATCH net-next 1/9] net: wan: remove leading spaces before tabs
Date: Thu, 20 May 2021 11:47:46 +0800 [thread overview]
Message-ID: <1621482474-26903-2-git-send-email-tanghui20@huawei.com> (raw)
In-Reply-To: <1621482474-26903-1-git-send-email-tanghui20@huawei.com>
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
---
drivers/net/wan/lmc/lmc.h | 2 +-
drivers/net/wan/wanxl.c | 4 ++--
drivers/net/wan/z85230.c | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h
index 3896179..3bd541c 100644
--- a/drivers/net/wan/lmc/lmc.h
+++ b/drivers/net/wan/lmc/lmc.h
@@ -9,7 +9,7 @@
*/
int lmc_probe(struct net_device * dev);
unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned
- devaddr, unsigned regno);
+ devaddr, unsigned regno);
void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
unsigned regno, unsigned data);
void lmc_led_on(lmc_softc_t * const, u32);
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index a831333..f393684 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -639,7 +639,7 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
card->plx = ioremap(plx_phy, 0x70);
if (!card->plx) {
pr_err("ioremap() failed\n");
- wanxl_pci_remove_one(pdev);
+ wanxl_pci_remove_one(pdev);
return -EFAULT;
}
@@ -707,7 +707,7 @@ static int wanxl_pci_init_one(struct pci_dev *pdev,
mem = ioremap(mem_phy, PDM_OFFSET + sizeof(firmware));
if (!mem) {
pr_err("ioremap() failed\n");
- wanxl_pci_remove_one(pdev);
+ wanxl_pci_remove_one(pdev);
return -EFAULT;
}
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 138930c..002b8c99 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -1080,7 +1080,7 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
z8530_rx_done(c);
z8530_rx_done(c);
- /*
+ /*
* Load the DMA interfaces up
*/
@@ -1092,13 +1092,13 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
c->dma_ready=1;
c->dma_tx = 1;
- /*
+ /*
* Enable DMA control mode
*/
- /*
+ /*
* TX DMA via DIR/REQ
- */
+ */
c->regs[R14]|= DTRREQ;
write_zsreg(c, R14, c->regs[R14]);
--
2.8.1
next prev parent reply other threads:[~2021-05-20 3:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-20 3:47 [PATCH net-next 0/9] net: " Hui Tang
2021-05-20 3:47 ` Hui Tang [this message]
2021-05-20 3:47 ` [PATCH net-next 2/9] net: usb: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 3/9] net: slip: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 4/9] net: ppp: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 5/9] net: hamradio: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 6/9] net: fddi: skfp: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 7/9] net: appletalk: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 8/9] ifb: " Hui Tang
2021-05-20 3:47 ` [PATCH net-next 9/9] mii: " Hui Tang
2021-05-20 22:20 ` [PATCH net-next 0/9] net: " patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621482474-26903-2-git-send-email-tanghui20@huawei.com \
--to=tanghui20@huawei.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=xie.he.0141@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®