mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>, <xie.he.0141@gmail.com>,
	<ms@dev.tdt.de>, <willemb@google.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<lipeng321@huawei.com>, <huangguangbin2@huawei.com>
Subject: [PATCH net-next 05/15] net: cosa: move out assignment in if condition
Date: Wed, 16 Jun 2021 15:23:31 +0800	[thread overview]
Message-ID: <1623828221-48349-6-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1623828221-48349-1-git-send-email-huangguangbin2@huawei.com>

From: Peng Li <lipeng321@huawei.com>

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
 drivers/net/wan/cosa.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 7b57233..9b57b3a 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -355,7 +355,8 @@ static int __init cosa_init(void)
 			goto out;
 		}
 	} else {
-		if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
+		cosa_major = register_chrdev(0, "cosa", &cosa_fops);
+		if (!cosa_major) {
 			pr_warn("unable to register chardev\n");
 			err = -EIO;
 			goto out;
@@ -563,7 +564,8 @@ static int cosa_probe(int base, int irq, int dma)
 		sema_init(&chan->wsem, 1);
 
 		/* Register the network interface */
-		if (!(chan->netdev = alloc_hdlcdev(chan))) {
+		chan->netdev = alloc_hdlcdev(chan);
+		if (!chan->netdev) {
 			pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
 			err = -ENOMEM;
 			goto err_hdlcdev;
@@ -925,15 +927,15 @@ static int cosa_open(struct inode *inode, struct file *file)
 	int ret = 0;
 
 	mutex_lock(&cosa_chardev_mutex);
-	if ((n=iminor(file_inode(file))>>CARD_MINOR_BITS)
-		>= nr_cards) {
+	n = iminor(file_inode(file)) >> CARD_MINOR_BITS;
+	if (n >= nr_cards) {
 		ret = -ENODEV;
 		goto out;
 	}
 	cosa = cosa_cards+n;
 
-	if ((n=iminor(file_inode(file))
-		& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels) {
+	n = iminor(file_inode(file)) & ((1 << CARD_MINOR_BITS) - 1);
+	if (n >= cosa->nchannels) {
 		ret = -ENODEV;
 		goto out;
 	}
@@ -1095,7 +1097,8 @@ static inline int cosa_start(struct cosa_data *cosa, int address)
 		return -EPERM;
 	}
 	cosa->firmware_status &= ~COSA_FW_RESET;
-	if ((i=startmicrocode(cosa, address)) < 0) {
+	i = startmicrocode(cosa, address);
+	if (i < 0) {
 		pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
 			  cosa->num, address, i);
 		return -EIO;
@@ -1475,7 +1478,8 @@ static int readmem(struct cosa_data *cosa, char __user *microcode, int length, i
 		char c;
 		int i;
 
-		if ((i=get_wait_data(cosa)) == -1) {
+		i = get_wait_data(cosa);
+		if (i == -1) {
 			pr_info("0x%04x bytes remaining\n", length);
 			return -11;
 		}
@@ -1523,9 +1527,10 @@ static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
 	 * the port returns '\r', '\n' or '\x2e' permanently.
 	 */
 	for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
-		if ((curr = get_wait_data(cosa)) == -1) {
+		curr = get_wait_data(cosa);
+		if (curr == -1)
 			return -1;
-		}
+
 		curr &= 0xff;
 		if (curr != '\r' && curr != '\n' && curr != 0x2e)
 			idstring[id++] = curr;
-- 
2.8.1


  parent reply	other threads:[~2021-06-16  7:27 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16  7:23 [PATCH net-next 00/15] net: cosa: clean up some code style issues Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 01/15] net: cosa: remove redundant blank lines Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 02/15] net: cosa: add blank line after declarations Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 03/15] net: cosa: fix the code style issue about "foo* bar" Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 04/15] net: cosa: replace comparison to NULL with "!chan->rx_skb" Guangbin Huang
2021-06-16  7:23 ` Guangbin Huang [this message]
2021-06-16  7:23 ` [PATCH net-next 06/15] net: cosa: fix the comments style issue Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 07/15] net: cosa: add braces {} to all arms of the statement Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 08/15] net: cosa: remove redundant braces {} Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 09/15] net: cosa: add necessary () to macro argument Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 10/15] net: cosa: use BIT macro Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 11/15] net: cosa: fix the alignment issue Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 12/15] net: cosa: fix the code style issue about trailing statements Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 13/15] net: cosa: add some required spaces Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 14/15] net: cosa: remove trailing whitespaces Guangbin Huang
2021-06-16  7:23 ` [PATCH net-next 15/15] net: cosa: remove redundant spaces Guangbin Huang
2021-06-16  8:00 ` [PATCH net-next 00/15] net: cosa: clean up some code style issues patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1623828221-48349-6-git-send-email-huangguangbin2@huawei.com \
    --to=huangguangbin2@huawei.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lipeng321@huawei.com \
    --cc=ms@dev.tdt.de \
    --cc=netdev@vger.kernel.org \
    --cc=willemb@google.com \
    --cc=xie.he.0141@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®