From: Guangbin Huang <huangguangbin2@huawei.com>
To: <davem@davemloft.net>, <kuba@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lipeng321@huawei.com>, <chenhao288@hisilicon.com>,
<huangguangbin2@huawei.com>
Subject: [PATCH net-next 2/7] net: hns3: reconstruct function hns3_self_test
Date: Mon, 30 Aug 2021 14:06:37 +0800 [thread overview]
Message-ID: <1630303602-44870-3-git-send-email-huangguangbin2@huawei.com> (raw)
In-Reply-To: <1630303602-44870-1-git-send-email-huangguangbin2@huawei.com>
From: Peng Li <lipeng321@huawei.com>
This patch reconstructs function hns3_self_test to reduce the code
cycle complexity and make code more concise.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 101 +++++++++++++--------
1 file changed, 64 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index b8d9851aefc5..7ea511d59e91 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -298,33 +298,8 @@ static int hns3_lp_run_test(struct net_device *ndev, enum hnae3_loop mode)
return ret_val;
}
-/**
- * hns3_self_test - self test
- * @ndev: net device
- * @eth_test: test cmd
- * @data: test result
- */
-static void hns3_self_test(struct net_device *ndev,
- struct ethtool_test *eth_test, u64 *data)
+static void hns3_set_selftest_param(struct hnae3_handle *h, int (*st_param)[2])
{
- struct hns3_nic_priv *priv = netdev_priv(ndev);
- struct hnae3_handle *h = priv->ae_handle;
- int st_param[HNS3_SELF_TEST_TYPE_NUM][2];
- bool if_running = netif_running(ndev);
- int test_index = 0;
- u32 i;
-
- if (hns3_nic_resetting(ndev)) {
- netdev_err(ndev, "dev resetting!");
- return;
- }
-
- /* Only do offline selftest, or pass by default */
- if (eth_test->flags != ETH_TEST_FL_OFFLINE)
- return;
-
- netif_dbg(h, drv, ndev, "self test start");
-
st_param[HNAE3_LOOP_APP][0] = HNAE3_LOOP_APP;
st_param[HNAE3_LOOP_APP][1] =
h->flags & HNAE3_SUPPORT_APP_LOOPBACK;
@@ -341,6 +316,18 @@ static void hns3_self_test(struct net_device *ndev,
st_param[HNAE3_LOOP_PHY][0] = HNAE3_LOOP_PHY;
st_param[HNAE3_LOOP_PHY][1] =
h->flags & HNAE3_SUPPORT_PHY_LOOPBACK;
+}
+
+static void hns3_selftest_prepare(struct net_device *ndev,
+ bool if_running, int (*st_param)[2])
+{
+ struct hns3_nic_priv *priv = netdev_priv(ndev);
+ struct hnae3_handle *h = priv->ae_handle;
+
+ if (netif_msg_ifdown(h))
+ netdev_info(ndev, "self test start\n");
+
+ hns3_set_selftest_param(h, st_param);
if (if_running)
ndev->netdev_ops->ndo_stop(ndev);
@@ -359,6 +346,35 @@ static void hns3_self_test(struct net_device *ndev,
h->ae_algo->ops->halt_autoneg(h, true);
set_bit(HNS3_NIC_STATE_TESTING, &priv->state);
+}
+
+static void hns3_selftest_restore(struct net_device *ndev, bool if_running)
+{
+ struct hns3_nic_priv *priv = netdev_priv(ndev);
+ struct hnae3_handle *h = priv->ae_handle;
+
+ clear_bit(HNS3_NIC_STATE_TESTING, &priv->state);
+
+ if (h->ae_algo->ops->halt_autoneg)
+ h->ae_algo->ops->halt_autoneg(h, false);
+
+#if IS_ENABLED(CONFIG_VLAN_8021Q)
+ if (h->ae_algo->ops->enable_vlan_filter)
+ h->ae_algo->ops->enable_vlan_filter(h, true);
+#endif
+
+ if (if_running)
+ ndev->netdev_ops->ndo_open(ndev);
+
+ if (netif_msg_ifdown(h))
+ netdev_info(ndev, "self test end\n");
+}
+
+static void hns3_do_selftest(struct net_device *ndev, int (*st_param)[2],
+ struct ethtool_test *eth_test, u64 *data)
+{
+ int test_index = 0;
+ u32 i;
for (i = 0; i < HNS3_SELF_TEST_TYPE_NUM; i++) {
enum hnae3_loop loop_type = (enum hnae3_loop)st_param[i][0];
@@ -377,21 +393,32 @@ static void hns3_self_test(struct net_device *ndev,
test_index++;
}
+}
- clear_bit(HNS3_NIC_STATE_TESTING, &priv->state);
-
- if (h->ae_algo->ops->halt_autoneg)
- h->ae_algo->ops->halt_autoneg(h, false);
+/**
+ * hns3_nic_self_test - self test
+ * @ndev: net device
+ * @eth_test: test cmd
+ * @data: test result
+ */
+static void hns3_self_test(struct net_device *ndev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ int st_param[HNS3_SELF_TEST_TYPE_NUM][2];
+ bool if_running = netif_running(ndev);
-#if IS_ENABLED(CONFIG_VLAN_8021Q)
- if (h->ae_algo->ops->enable_vlan_filter)
- h->ae_algo->ops->enable_vlan_filter(h, true);
-#endif
+ if (hns3_nic_resetting(ndev)) {
+ netdev_err(ndev, "dev resetting!");
+ return;
+ }
- if (if_running)
- ndev->netdev_ops->ndo_open(ndev);
+ /* Only do offline selftest, or pass by default */
+ if (eth_test->flags != ETH_TEST_FL_OFFLINE)
+ return;
- netif_dbg(h, drv, ndev, "self test end\n");
+ hns3_selftest_prepare(ndev, if_running, st_param);
+ hns3_do_selftest(ndev, st_param, eth_test, data);
+ hns3_selftest_restore(ndev, if_running);
}
static void hns3_update_limit_promisc_mode(struct net_device *netdev,
--
2.8.1
next prev parent reply other threads:[~2021-08-30 6:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 6:06 [PATCH net-next 0/7] net: hns3: add some cleanups Guangbin Huang
2021-08-30 6:06 ` [PATCH net-next 1/7] net: hns3: initialize each member of structure array on a separate line Guangbin Huang
2021-08-30 6:06 ` Guangbin Huang [this message]
2021-08-30 6:06 ` [PATCH net-next 3/7] net: hns3: reconstruct function hclge_ets_validate() Guangbin Huang
2021-08-30 6:06 ` [PATCH net-next 4/7] net: hns3: refine function hclge_dbg_dump_tm_pri() Guangbin Huang
2021-08-30 6:06 ` [PATCH net-next 5/7] net: hns3: modify a print format of hns3_dbg_queue_map() Guangbin Huang
2021-08-30 6:06 ` [PATCH net-next 6/7] net: hnss3: use max() to simplify code Guangbin Huang
2021-08-30 6:06 ` [PATCH net-next 7/7] net: hns3: uniform parameter name of hclge_ptp_clean_tx_hwts() Guangbin Huang
2021-08-30 8:50 ` [PATCH net-next 0/7] net: hns3: add some cleanups patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1630303602-44870-3-git-send-email-huangguangbin2@huawei.com \
--to=huangguangbin2@huawei.com \
--cc=chenhao288@hisilicon.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®