[PATCH] scsi: lpfc: Fix the misuse of the logging function

[Zheyu Ma <zheyuma97@gmail.com>]

When the driver fails in lpfc_enable_pci_dev(), it will call
lpfc_printf_log(), and in a certain case the lpfc_dmp_dbg() is
eventually called, this function uses 'phba->port_list_lock', and at
this time this lock is not been initialized, which may cause a bug.

Fix this by using 'dev_printk' to replace the previous function.

The following log reveals it:

[   32.955597  ] INFO: trying to register non-static key.
[   32.956002  ] The code is fine but needs lockdep annotation, or maybe
[   32.956491  ] you didn't initialize this object before use?
[   32.956916  ] turning off the locking correctness validator.
[   32.958801  ] Call Trace:
[   32.958994  ]  dump_stack_lvl+0xa8/0xd1
[   32.959286  ]  dump_stack+0x15/0x17
[   32.959547  ]  assign_lock_key+0x212/0x220
[   32.959853  ]  ? SOFTIRQ_verbose+0x10/0x10
[   32.960158  ]  ? lock_is_held_type+0xd6/0x130
[   32.960483  ]  register_lock_class+0x126/0x790
[   32.960815  ]  ? rcu_read_lock_sched_held+0x33/0x70
[   32.961233  ]  __lock_acquire+0xe9/0x1e20
[   32.961565  ]  ? delete_node+0x71e/0x790
[   32.961859  ]  ? __this_cpu_preempt_check+0x13/0x20
[   32.962220  ]  ? lock_is_held_type+0xd6/0x130
[   32.962545  ]  lock_acquire+0x244/0x490
[   32.962831  ]  ? lpfc_dmp_dbg+0x65/0x600 [lpfc]
[   32.963241  ]  ? __kasan_check_write+0x14/0x20
[   32.963572  ]  ? read_lock_is_recursive+0x20/0x20
[   32.963921  ]  ? __this_cpu_preempt_check+0x13/0x20
[   32.964284  ]  ? lpfc_dmp_dbg+0x65/0x600 [lpfc]
[   32.964685  ]  ? _raw_spin_lock_irqsave+0x29/0x70
[   32.965086  ]  ? __kasan_check_read+0x11/0x20
[   32.965410  ]  ? trace_irq_disable_rcuidle+0x85/0x170
[   32.965787  ]  _raw_spin_lock_irqsave+0x4e/0x70
[   32.966124  ]  ? lpfc_dmp_dbg+0x65/0x600 [lpfc]
[   32.966526  ]  lpfc_dmp_dbg+0x65/0x600 [lpfc]
[   32.966913  ]  ? lockdep_init_map_type+0x162/0x710
[   32.967269  ]  ? error_prone+0x25/0x30 [lpfc]
[   32.967657  ]  lpfc_enable_pci_dev+0x157/0x250 [lpfc]

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 12 +++++-------
 drivers/scsi/lpfc/lpfc_scsi.c |  5 ++---
 drivers/scsi/lpfc/lpfc_sli.c  | 10 ++++------
 3 files changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0ec322f0e3cb..226b9ccfffb3 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7331,10 +7331,10 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
 static int
 lpfc_enable_pci_dev(struct lpfc_hba *phba)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = phba->pcidev;
 
 	/* Obtain PCI device reference */
-	if (!phba->pcidev)
+	if (!pdev)
 		goto out_error;
 	else
 		pdev = phba->pcidev;
@@ -7358,8 +7358,7 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba)
 out_disable_device:
 	pci_disable_device(pdev);
 out_error:
-	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-			"1401 Failed to enable pci device\n");
+	dev_err(&pdev->dev, "1401 Failed to enable pci device\n");
 	return -ENODEV;
 }
 
@@ -8401,9 +8400,8 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 		phba->lpfc_stop_port = lpfc_stop_port_s4;
 		break;
 	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"1431 Invalid HBA PCI-device group: 0x%x\n",
-				dev_grp);
+		dev_err(&phba->pcidev->dev,
+				"1431 Invalid HBA PCI-device group: 0x%x\n", dev_grp);
 		return -ENODEV;
 	}
 	return 0;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 0fde1e874c7a..8ffce2d2a993 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5096,9 +5096,8 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 		phba->lpfc_scsi_prep_cmnd_buf = lpfc_scsi_prep_cmnd_buf_s4;
 		break;
 	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"1418 Invalid HBA PCI-device group: 0x%x\n",
-				dev_grp);
+		dev_err(&phba->pcidev->dev,
+				"1418 Invalid HBA PCI-device group: 0x%x\n", dev_grp);
 		return -ENODEV;
 	}
 	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index ffd8a140638c..c1cf0ad018e0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -10010,9 +10010,8 @@ lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
 		break;
 	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"1420 Invalid HBA PCI-device group: 0x%x\n",
-				dev_grp);
+		dev_err(&phba->pcidev->dev,
+				"1420 Invalid HBA PCI-device group: 0x%x\n", dev_grp);
 		return -ENODEV;
 	}
 	return 0;
@@ -11178,9 +11177,8 @@ lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 		phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s4;
 		break;
 	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"1419 Invalid HBA PCI-device group: 0x%x\n",
-				dev_grp);
+		dev_err(&phba->pcidev->dev,
+				"1419 Invalid HBA PCI-device group: 0x%x\n", dev_grp);
 		return -ENODEV;
 	}
 	phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
-- 
2.17.6