From: Caz Yokoyama <caz@caztech.com>
To: linux-kernel@vger.kernel.org
Cc: caz@caztech.com
Subject: dmfe is slow because of "eth1: Tx timeout - resetting"
Date: Sun, 4 Jan 2004 08:09:38 -0800 [thread overview]
Message-ID: <16376.15042.668588.675054@ventus.caztech.com> (raw)
[1.] dmfe is slow because of "eth1: Tx timeout - resetting"
[2.]
When my PC has Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802
NIC(PCI, driver is dmfe) and Hawking UF100(USB, driver is pegasus),
DM9102 is reset frequently(like every 20 second). Therefore,
communication is very slow. The message I got from DM9102 is
Jan 4 06:59:27 tragi kernel: eth1: Tx timeout - resetting
This message appears every time it is reset.
Sometimes I got the message from pegasus driver which comes from
info("intr status %d", urb->status);
in static void intr_callback(struct urb *urb). The status is -84.
[3.] networking, dmfe, pegasus, resetting
[4.]
Linux version 2.4.23 (root@tragi) (gcc version 2.95.4 20011002 (Debian prereleas
e)) #8 Sun Dec 28 06:55:30 PST 2003
[5.]
Jan 4 07:05:16 tragi kernel: eth1: Tx timeout - resetting
[6.]
When ping to the eth1(DM9102), several icmp_seq in about 200 of icmp
packets are skipped when it is reset. The communication on pegasus
seems OK.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
# sh ./scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux tragi 2.4.23 #8 Sun Dec 28 06:55:30 PST 2003 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
reiserfsprogs 3.x.1b
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded rtc orinoco_tmd orinoco hermes dmfe crc32 pegasus isofs vfat fat nfs lockd sunrpc ipt_LOG ipt_state iptable_mangle iptable_filter ipt_MASQUERADE iptable_nat ip_conntrack ip_tables lp parport_pc parport ext3 jbd usb-ohci usbcore
[7.2.] Processor information (from /proc/cpuinfo):
$ cat cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 501.137
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 999.42
[7.3.] Module information (from /proc/modules):
# cat /proc/modules
rtc 5756 0 (autoclean)
orinoco_tmd 1952 1 (autoclean)
orinoco 30720 0 (autoclean) [orinoco_tmd]
hermes 5216 0 (autoclean) [orinoco_tmd orinoco]
dmfe 11836 1 (autoclean)
crc32 2832 0 (autoclean) [dmfe]
pegasus 13984 1 (autoclean)
isofs 17152 0 (unused)
vfat 9308 0 (unused)
fat 29368 0 [vfat]
nfs 63196 0 (unused)
lockd 47296 0 [nfs]
sunrpc 61492 0 [nfs lockd]
ipt_LOG 3264 10
ipt_state 608 2
iptable_mangle 2208 0 (unused)
iptable_filter 1728 1
ipt_MASQUERADE 1312 2
iptable_nat 14900 1 [ipt_MASQUERADE]
ip_conntrack 18132 2 [ipt_state ipt_MASQUERADE iptable_nat]
ip_tables 10912 8 [ipt_LOG ipt_state iptable_mangle iptable_filter ipt_MASQUERADE iptable_nat]
lp 5568 0 (unused)
parport_pc 11844 1
parport 13856 1 [lp parport_pc]
ext3 57152 2
jbd 36232 2 [ext3]
usb-ohci 16192 0 (unused)
usbcore 34528 0 [pegasus usb-ohci]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
bc00-bc7f : PCI device 1039:6306
d600-d6ff : PCI device 13f6:0111
d800-d83f : PCI device 13f6:0211
da00-da7f : PCI device 1282:9102
da00-da7f : dmfe
dc00-dc3f : PCI device 15e8:0131
dc00-dc3f : orinoco_tmd
de00-de0f : PCI device 15e8:0131
ffa0-ffaf : PCI device 1039:5513
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
$ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cbfff : Extension ROM
000f0000-000fffff : System ROM
00100000-077effff : System RAM
00100000-001ca3d5 : Kernel code
001ca3d6-001fe8ff : Kernel data
077f0000-077f7fff : ACPI Tables
077f8000-077fffff : ACPI Non-volatile Storage
e6c00000-e7cfffff : PCI Bus #01
e7000000-e77fffff : PCI device 1039:6306
e7e00000-e7efffff : PCI Bus #01
e7ef0000-e7efffff : PCI device 1039:6306
e8000000-ebffffff : PCI device 1039:0620
efffaf80-efffafff : PCI device 1282:9102
efffaf80-efffafff : dmfe
efffb000-efffbfff : PCI device 1039:7001
efffb000-efffbfff : usb-ohci
ffef0000-ffefffff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
# lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 620 Host (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev b3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Class ff00: Silicon Integrated Systems [SiS] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 11) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: Memory at efffb000 (32-bit, non-prefetchable) [size=4K]
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e7e00000-e7efffff
Prefetchable memory behind bridge: e6c00000-e7cfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:09.0 Network controller: National Datacomm Corp: Unknown device 0131 (rev 01)
Subsystem: National Datacomm Corp: Unknown device 0131
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 1: I/O ports at de00 [size=16]
Region 2: I/O ports at dc00 [size=64]
00:0b.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 10)
Subsystem: Unknown device 0291:8212
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at da00 [size=128]
Region 1: Memory at efffaf80 (32-bit, non-prefetchable) [size=128]
Expansion ROM at eff80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d600 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CM8738
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 12
Region 0: I/O ports at d800 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk+ DSI- D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable+ DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 6306 3D-AGP (rev 2a) (prog-if 00 [VGA])
Subsystem: Silicon Integrated Systems [SiS] SiS530,620 GUI Accelerator+3D
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Region 0: Memory at e7000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at e7ef0000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at bc00 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
# cat /proc/scsi/scsi
cat: /proc/scsi/scsi: No such file or directory
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
# cd /proc
# ls
1 1481 1627 456 5 523 cpuinfo iomem misc swaps
109 1482 1628 461 500 524 devices ioports modules sys
127 1499 1699 465 503 528 dma irq mounts sysvipc
1319 1500 2 470 506 529 driver kcore net tty
132 1551 2054 48 510 6 execdomains kmsg partitions uptime
1320 1580 3 483 513 82 filesystems ksyms pci version
1321 1581 3933 492 517 83 fs loadavg self
1322 1595 4 494 521 bus ide locks slabinfo
1323 1601 453 498 522 cmdline interrupts meminfo stat
[X.] Other notes, patches, fixes, workarounds:
dmfe without pegasus works fine. I haven't check the pegasus alone.
reply other threads:[~2004-01-04 16:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16376.15042.668588.675054@ventus.caztech.com \
--to=caz@caztech.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®