[PATCH v2] libata: if T_LENGTH is zero, dma direction should be DMA_NONE

[George Kennedy <george.kennedy@oracle.com>]

Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.

Cc: <stable@vger.kernel.org>
Reported-by: syzkaller<syzkaller@googlegroups.com>
Signed-off-by: George Kennedy<george.kennedy@oracle.com>
---
 drivers/ata/libata-scsi.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1b84d55..313e947 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2859,8 +2859,19 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 		goto invalid_fld;
 	}
 
-	if (ata_is_ncq(tf->protocol) && (cdb[2 + cdb_offset] & 0x3) == 0)
-		tf->protocol = ATA_PROT_NCQ_NODATA;
+	if ((cdb[2 + cdb_offset] & 0x3) == 0) {
+		/*
+		 * When T_LENGTH is zero (No data is transferred), dir should
+		 * be DMA_NONE.
+		 */
+		if (scmd->sc_data_direction != DMA_NONE) {
+			fp = 2 + cdb_offset;
+			goto invalid_fld;
+		}
+
+		if (ata_is_ncq(tf->protocol))
+			tf->protocol = ATA_PROT_NCQ_NODATA;
+	}
 
 	/* enable LBA */
 	tf->flags |= ATA_TFLAG_LBA;
-- 
1.8.3.1