From: "tip-bot2 for Christoph Hellwig" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>, Borislav Petkov <bp@suse.de>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: x86/misc] x86/mtrr: Remove the mtrr_bp_init() stub
Date: Wed, 22 Dec 2021 18:56:08 -0000 [thread overview]
Message-ID: <164019936800.16921.666959600116418934.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20211215165612.554426-2-hch@lst.de>
The following commit has been merged into the x86/misc branch of tip:
Commit-ID: 4d5cff69fbddbbefef2903faa48263cc5d3ca382
Gitweb: https://git.kernel.org/tip/4d5cff69fbddbbefef2903faa48263cc5d3ca382
Author: Christoph Hellwig <hch@lst.de>
AuthorDate: Wed, 15 Dec 2021 17:56:11 +01:00
Committer: Borislav Petkov <bp@suse.de>
CommitterDate: Wed, 22 Dec 2021 19:50:26 +01:00
x86/mtrr: Remove the mtrr_bp_init() stub
Add an IS_ENABLED() check in setup_arch() and call pat_disable()
directly if MTRRs are not supported. This allows to remove the
<asm/memtype.h> include in <asm/mtrr.h>, which pull in lowlevel x86
headers that should not be included for UML builds and will cause build
warnings with a following patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211215165612.554426-2-hch@lst.de
---
arch/x86/include/asm/mtrr.h | 8 +-------
arch/x86/kernel/setup.c | 7 ++++++-
arch/x86/kvm/mmu/spte.c | 1 +
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index 829df26..76d7260 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -24,8 +24,8 @@
#define _ASM_X86_MTRR_H
#include <uapi/asm/mtrr.h>
-#include <asm/memtype.h>
+void mtrr_bp_init(void);
/*
* The following functions are for use by other drivers that cannot use
@@ -43,7 +43,6 @@ extern int mtrr_del(int reg, unsigned long base, unsigned long size);
extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
extern void mtrr_ap_init(void);
-extern void mtrr_bp_init(void);
extern void set_mtrr_aps_delayed_init(void);
extern void mtrr_aps_init(void);
extern void mtrr_bp_restore(void);
@@ -84,11 +83,6 @@ static inline int mtrr_trim_uncached_memory(unsigned long end_pfn)
static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
{
}
-static inline void mtrr_bp_init(void)
-{
- pat_disable("PAT support disabled because CONFIG_MTRR is disabled in the kernel.");
-}
-
#define mtrr_ap_init() do {} while (0)
#define set_mtrr_aps_delayed_init() do {} while (0)
#define mtrr_aps_init() do {} while (0)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6a190c7..2f5129b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -40,6 +40,7 @@
#include <asm/kasan.h>
#include <asm/kaslr.h>
#include <asm/mce.h>
+#include <asm/memtype.h>
#include <asm/mtrr.h>
#include <asm/realmode.h>
#include <asm/olpc_ofw.h>
@@ -979,7 +980,11 @@ void __init setup_arch(char **cmdline_p)
max_pfn = e820__end_of_ram_pfn();
/* update e820 for memory not covered by WB MTRRs */
- mtrr_bp_init();
+ if (IS_ENABLED(CONFIG_MTRR))
+ mtrr_bp_init();
+ else
+ pat_disable("PAT support disabled because CONFIG_MTRR is disabled in the kernel.");
+
if (mtrr_trim_uncached_memory(max_pfn))
max_pfn = e820__end_of_ram_pfn();
diff --git a/arch/x86/kvm/mmu/spte.c b/arch/x86/kvm/mmu/spte.c
index 0c76c45..fad546d 100644
--- a/arch/x86/kvm/mmu/spte.c
+++ b/arch/x86/kvm/mmu/spte.c
@@ -16,6 +16,7 @@
#include "spte.h"
#include <asm/e820/api.h>
+#include <asm/memtype.h>
#include <asm/vmx.h>
static bool __read_mostly enable_mmio_caching = true;
next prev parent reply other threads:[~2021-12-22 18:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 16:56 remove set_fs for UML Christoph Hellwig
2021-12-15 16:56 ` [PATCH 1/2] x86/mtrr: remove the mtrr_bp_init stub Christoph Hellwig
2021-12-22 18:56 ` tip-bot2 for Christoph Hellwig [this message]
2021-12-15 16:56 ` [PATCH 2/2] um: remove set_fs Christoph Hellwig
2021-12-21 21:05 ` remove set_fs for UML Richard Weinberger
2021-12-22 8:17 ` hch
2021-12-22 13:55 ` Borislav Petkov
2021-12-22 16:55 ` Richard Weinberger
2021-12-22 18:54 ` Borislav Petkov
2022-01-01 0:12 ` Al Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164019936800.16921.666959600116418934.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=bp@suse.de \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®