mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Mosberger <davidm@napali.hpl.hp.com>
To: Herbert Poetzl <herbert@13thfloor.at>
Cc: davidm@hpl.hp.com, linux-kernel@vger.kernel.org,
	linux-gcc@vger.kernel.org, wilson@specifixinc.com
Subject: Re: Kernel Cross Compiling
Date: Fri, 13 Feb 2004 16:58:56 -0800	[thread overview]
Message-ID: <16429.29392.529575.21798@napali.hpl.hp.com> (raw)
In-Reply-To: <20040213214420.GA32006@MAIL.13thfloor.at>

>>>>> On Fri, 13 Feb 2004 22:44:20 +0100, Herbert Poetzl <herbert@13thfloor.at> said:

  >> A recipe for building ia32->ia64 cross-toolchain on Debian can be
  >> found here:

  >> http://www.gelato.unsw.edu.au/IA64wiki/CrossCompilation

  Herbert> that might work with the ia64 libraries and headers, but it
  Herbert> seems to fail, with the headers included in the gcc
  Herbert> tarball, for cross compiling, if you get it to compile
  Herbert> without (g)libc which should not be required to build the
  Herbert> crossgcc and the kernel, I would be very interested ...

Ah, I see now what you mean.  I suspect that's a setup that's rarely
tested, so I'm not surprised to see some breakage.

Having said that, I got gcc v3.3.3 20031212 (prerelease) to build with
minor tweaks (see patch below).  I'm no GCC-built-environment expert
and I'm quite certain that the patch isn't totally correct, but all
the unwind-related stuff isn't really needed in your case, because
that code only comes into play for exception-handling and C cleanup
handlers.

The unwind-sjlj.c problem should occur on most other platforms too, so
I don't think that problem is ia64-specific.

	--david

Index: gcc/unwind-sjlj.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/unwind-sjlj.c,v
retrieving revision 1.11.2.2
diff -u -r1.11.2.2 unwind-sjlj.c
--- gcc/unwind-sjlj.c	2 May 2003 21:01:21 -0000	1.11.2.2
+++ gcc/unwind-sjlj.c	14 Feb 2004 00:50:33 -0000
@@ -22,7 +22,9 @@
 #include "tconfig.h"
 #include "tsystem.h"
 #include "unwind.h"
+#ifndef inhibit_libc
 #include "gthr.h"
+#endif
 
 #ifdef __USING_SJLJ_EXCEPTIONS__
 
Index: gcc/unwind.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/unwind.h,v
retrieving revision 1.7.2.6
diff -u -r1.7.2.6 unwind.h
--- gcc/unwind.h	4 Sep 2003 09:39:44 -0000	1.7.2.6
+++ gcc/unwind.h	14 Feb 2004 00:50:33 -0000
@@ -195,7 +195,9 @@
    compatible with the standard ABI for IA-64, we inline these.  */
 
 #ifdef __ia64__
-#include <stdlib.h>
+# ifndef inhibit_libc
+#  include <stdlib.h>
+# endif
 
 static inline _Unwind_Ptr
 _Unwind_GetDataRelBase (struct _Unwind_Context *_C)
Index: gcc/config/ia64/fde-glibc.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/ia64/fde-glibc.c,v
retrieving revision 1.5
diff -u -r1.5 fde-glibc.c
--- gcc/config/ia64/fde-glibc.c	15 Dec 2001 11:46:51 -0000	1.5
+++ gcc/config/ia64/fde-glibc.c	14 Feb 2004 00:50:34 -0000
@@ -31,6 +31,9 @@
 #ifndef _GNU_SOURCE
 #define _GNU_SOURCE
 #endif
+
+#ifndef inhibit_libc
+
 #include "config.h"
 #include <stddef.h>
 #include <stdlib.h>
@@ -162,3 +165,5 @@
 
   return data.ret;
 }
+
+#endif
Index: gcc/config/ia64/linux.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/ia64/linux.h,v
retrieving revision 1.23
diff -u -r1.23 linux.h
--- gcc/config/ia64/linux.h	3 Sep 2002 21:09:54 -0000	1.23
+++ gcc/config/ia64/linux.h	14 Feb 2004 00:50:34 -0000
@@ -58,7 +58,7 @@
 /* Do code reading to identify a signal frame, and set the frame
    state data appropriately.  See unwind-dw2.c for the structs.  */
 
-#ifdef IN_LIBGCC2
+#ifdef x_IN_LIBGCC2
 #include <signal.h>
 #include <sys/ucontext.h>
 

  reply	other threads:[~2004-02-14  1:01 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-13 20:57 Herbert Poetzl
2004-02-13 21:31 ` David Mosberger
2004-02-13 21:44   ` Herbert Poetzl
2004-02-14  0:58     ` David Mosberger [this message]
2004-02-14  1:08       ` Herbert Poetzl
2004-02-14  2:35         ` Herbert Poetzl
2004-02-14  2:51           ` David Mosberger
2004-02-16 22:50       ` Jim Wilson
2004-02-16  0:03   ` Peter Chubb
2004-02-14  8:32 ` Timothy D. Witham
2004-02-14 13:03   ` Herbert Poetzl
2004-02-14 19:25     ` Timothy D. Witham
2004-02-14 22:08       ` Herbert Poetzl
2004-02-16 21:41     ` cliff white
2004-02-16 22:10       ` Herbert Poetzl
2004-02-17 13:26 ` Maciej W. Rozycki
     [not found] <20040213205743.GA30245@MAIL.13thfloor.at.suse.lists.linux.kernel>
2004-02-13 21:25 ` Andi Kleen
2004-02-13 21:46   ` Herbert Poetzl
2004-02-13 23:45   ` Herbert Poetzl
2004-02-15 11:16     ` Geert Uytterhoeven
2004-02-15 17:38       ` Herbert Poetzl
2004-02-16 13:51         ` Keith Owens
2004-02-14  3:26 Stephen M. Kenton
2004-02-14 14:21 ` Herbert Poetzl
2004-02-15 23:28   ` Robert Schwebel
2004-02-15 23:59     ` William Lee Irwin III
2004-02-14 21:03 Dan Kegel
2004-02-14 22:07 ` Herbert Poetzl
2004-02-15  3:51   ` Dan Kegel
2004-02-17 21:51 Judith Lebzelter
2004-02-18  7:19 ` Herbert Poetzl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=16429.29392.529575.21798@napali.hpl.hp.com \
    --to=davidm@napali.hpl.hp.com \
    --cc=davidm@hpl.hp.com \
    --cc=herbert@13thfloor.at \
    --cc=linux-gcc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wilson@specifixinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®