mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Masami Hiramatsu" <mhiramat@kernel.org>
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v2 2/3] PCI: uniphier-ep: Add support for non-legacy SoC
Date: Fri,  4 Feb 2022 13:25:38 +0900	[thread overview]
Message-ID: <1643948739-14889-3-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1643948739-14889-1-git-send-email-hayashi.kunihiko@socionext.com>

Define SoC data that includes pci_epc_features and boolean 'is_legacy'
to distinguish between legacy SoC (ex. Pro5) and non-legacy SoC.

Rename uniphier_pcie_init_ep() to uniphier_pcie_init_ep_legacy() for
initializing PCIe controller implemented in legacy SoC, add new
uniphier_pcie_init_ep() and uniphier_pcie_wait_ep() for non-legacy SoC
in the same method as pcie-uniphier driver.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/pci/controller/dwc/pcie-uniphier-ep.c | 124 ++++++++++++++++++++++----
 1 file changed, 106 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
index 69810c6b0d58..073bdf7fcee3 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier-ep.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/of_device.h>
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
@@ -31,6 +32,17 @@
 #define PCL_RSTCTRL2			0x0024
 #define PCL_RSTCTRL_PHY_RESET		BIT(0)
 
+#define PCL_PINCTRL0			0x002c
+#define PCL_PERST_PLDN_REGEN		BIT(12)
+#define PCL_PERST_NOE_REGEN		BIT(11)
+#define PCL_PERST_OUT_REGEN		BIT(8)
+#define PCL_PERST_PLDN_REGVAL		BIT(4)
+#define PCL_PERST_NOE_REGVAL		BIT(3)
+#define PCL_PERST_OUT_REGVAL		BIT(0)
+
+#define PCL_PIPEMON			0x0044
+#define PCL_PCLK_ALIVE			BIT(15)
+
 #define PCL_MODE			0x8000
 #define PCL_MODE_REGEN			BIT(8)
 #define PCL_MODE_REGVAL			BIT(0)
@@ -51,6 +63,9 @@
 #define PCL_APP_INTX			0x8074
 #define PCL_APP_INTX_SYS_INT		BIT(0)
 
+#define PCL_APP_PM0			0x8078
+#define PCL_SYS_AUX_PWR_DET		BIT(8)
+
 /* assertion time of INTx in usec */
 #define PCL_INTX_WIDTH_USEC		30
 
@@ -60,7 +75,12 @@ struct uniphier_pcie_ep_priv {
 	struct clk *clk, *clk_gio;
 	struct reset_control *rst, *rst_gio;
 	struct phy *phy;
-	const struct pci_epc_features *features;
+	const struct uniphier_pcie_ep_soc_data *data;
+};
+
+struct uniphier_pcie_ep_soc_data {
+	bool is_legacy;
+	const struct pci_epc_features features;
 };
 
 #define to_uniphier_pcie(x)	dev_get_drvdata((x)->dev)
@@ -91,7 +111,7 @@ static void uniphier_pcie_phy_reset(struct uniphier_pcie_ep_priv *priv,
 	writel(val, priv->base + PCL_RSTCTRL2);
 }
 
-static void uniphier_pcie_init_ep(struct uniphier_pcie_ep_priv *priv)
+static void uniphier_pcie_init_ep_legacy(struct uniphier_pcie_ep_priv *priv)
 {
 	u32 val;
 
@@ -116,6 +136,63 @@ static void uniphier_pcie_init_ep(struct uniphier_pcie_ep_priv *priv)
 	msleep(100);
 }
 
+static void uniphier_pcie_init_ep(struct uniphier_pcie_ep_priv *priv)
+{
+	u32 val;
+
+	if (priv->data->is_legacy) {
+		uniphier_pcie_init_ep_legacy(priv);
+		return;
+	}
+
+	/* set EP mode */
+	val = readl(priv->base + PCL_MODE);
+	val |= PCL_MODE_REGEN | PCL_MODE_REGVAL;
+	writel(val, priv->base + PCL_MODE);
+
+	/* use auxiliary power detection */
+	val = readl(priv->base + PCL_APP_PM0);
+	val |= PCL_SYS_AUX_PWR_DET;
+	writel(val, priv->base + PCL_APP_PM0);
+
+	/* assert PERST# */
+	val = readl(priv->base + PCL_PINCTRL0);
+	val &= ~(PCL_PERST_NOE_REGVAL | PCL_PERST_OUT_REGVAL
+		 | PCL_PERST_PLDN_REGVAL);
+	val |= PCL_PERST_NOE_REGEN | PCL_PERST_OUT_REGEN
+		| PCL_PERST_PLDN_REGEN;
+	writel(val, priv->base + PCL_PINCTRL0);
+
+	uniphier_pcie_ltssm_enable(priv, false);
+
+	usleep_range(100000, 200000);
+
+	/* deassert PERST# */
+	val = readl(priv->base + PCL_PINCTRL0);
+	val |= PCL_PERST_OUT_REGVAL | PCL_PERST_OUT_REGEN;
+	writel(val, priv->base + PCL_PINCTRL0);
+}
+
+static int uniphier_pcie_wait_ep(struct uniphier_pcie_ep_priv *priv)
+{
+	u32 status;
+	int ret;
+
+	if (priv->data->is_legacy)
+		return 0;
+
+	/* wait PIPE clock */
+	ret = readl_poll_timeout(priv->base + PCL_PIPEMON, status,
+				 status & PCL_PCLK_ALIVE, 100000, 1000000);
+	if (ret) {
+		dev_err(priv->pci.dev,
+			"Failed to initialize controller in EP mode\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int uniphier_pcie_start_link(struct dw_pcie *pci)
 {
 	struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
@@ -209,7 +286,7 @@ uniphier_pcie_get_features(struct dw_pcie_ep *ep)
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 	struct uniphier_pcie_ep_priv *priv = to_uniphier_pcie(pci);
 
-	return priv->features;
+	return &priv->data->features;
 }
 
 static const struct dw_pcie_ep_ops uniphier_pcie_ep_ops = {
@@ -248,8 +325,14 @@ static int uniphier_pcie_ep_enable(struct uniphier_pcie_ep_priv *priv)
 
 	uniphier_pcie_phy_reset(priv, false);
 
+	ret = uniphier_pcie_wait_ep(priv);
+	if (ret)
+		goto out_phy_exit;
+
 	return 0;
 
+out_phy_exit:
+	phy_exit(priv->phy);
 out_rst_gio_assert:
 	reset_control_assert(priv->rst_gio);
 out_rst_assert:
@@ -277,8 +360,8 @@ static int uniphier_pcie_ep_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->features = of_device_get_match_data(dev);
-	if (WARN_ON(!priv->features))
+	priv->data = of_device_get_match_data(dev);
+	if (WARN_ON(!priv->data))
 		return -EINVAL;
 
 	priv->pci.dev = dev;
@@ -288,13 +371,15 @@ static int uniphier_pcie_ep_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->clk_gio = devm_clk_get(dev, "gio");
-	if (IS_ERR(priv->clk_gio))
-		return PTR_ERR(priv->clk_gio);
+	if (priv->data->is_legacy) {
+		priv->clk_gio = devm_clk_get(dev, "gio");
+		if (IS_ERR(priv->clk_gio))
+			return PTR_ERR(priv->clk_gio);
 
-	priv->rst_gio = devm_reset_control_get_shared(dev, "gio");
-	if (IS_ERR(priv->rst_gio))
-		return PTR_ERR(priv->rst_gio);
+		priv->rst_gio = devm_reset_control_get_shared(dev, "gio");
+		if (IS_ERR(priv->rst_gio))
+			return PTR_ERR(priv->rst_gio);
+	}
 
 	priv->clk = devm_clk_get(dev, "link");
 	if (IS_ERR(priv->clk))
@@ -321,13 +406,16 @@ static int uniphier_pcie_ep_probe(struct platform_device *pdev)
 	return dw_pcie_ep_init(&priv->pci.ep);
 }
 
-static const struct pci_epc_features uniphier_pro5_data = {
-	.linkup_notifier = false,
-	.msi_capable = true,
-	.msix_capable = false,
-	.align = 1 << 16,
-	.bar_fixed_64bit = BIT(BAR_0) | BIT(BAR_2) | BIT(BAR_4),
-	.reserved_bar =  BIT(BAR_4),
+static const struct uniphier_pcie_ep_soc_data uniphier_pro5_data = {
+	.is_legacy = true,
+	.features = {
+		.linkup_notifier = false,
+		.msi_capable = true,
+		.msix_capable = false,
+		.align = 1 << 16,
+		.bar_fixed_64bit = BIT(BAR_0) | BIT(BAR_2) | BIT(BAR_4),
+		.reserved_bar =  BIT(BAR_4),
+	},
 };
 
 static const struct of_device_id uniphier_pcie_ep_match[] = {
-- 
2.7.4


  parent reply	other threads:[~2022-02-04  4:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04  4:25 [PATCH v2 0/3] PCI: Introduce UniPhier NX1 PCI endpoint controller support Kunihiko Hayashi
2022-02-04  4:25 ` [PATCH v2 1/3] dt-bindings: PCI: uniphier-ep: Add bindings for NX1 SoC Kunihiko Hayashi
2022-02-04  4:25 ` Kunihiko Hayashi [this message]
2022-02-04  4:25 ` [PATCH v2 3/3] PCI: uniphier-ep: Add compatible string and SoC-dependent data " Kunihiko Hayashi
2022-02-09 22:04 ` [PATCH v2 0/3] PCI: Introduce UniPhier NX1 PCI endpoint controller support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1643948739-14889-3-git-send-email-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mhiramat@kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®