mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krishna Yarlagadda <kyarlagadda@nvidia.com>
To: <broonie@kernel.org>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <linux-spi@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>
Cc: <skomatineni@nvidia.com>, <ldewangan@nvidia.com>,
	<robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <p.zabel@pengutronix.de>,
	Krishna Yarlagadda <kyarlagadda@nvidia.com>
Subject: [PATCH 4/6] spi: tegra210-quad: add acpi support
Date: Fri, 4 Feb 2022 15:59:34 +0530	[thread overview]
Message-ID: <1643970576-31503-5-git-send-email-kyarlagadda@nvidia.com> (raw)
In-Reply-To: <1643970576-31503-1-git-send-email-kyarlagadda@nvidia.com>

Add ACPI ID for Tegra QUAD SPI. Switch to common device property calls.
Skip clock calls that are not updated in ACPI boot.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
 drivers/spi/spi-tegra210-quad.c | 50 ++++++++++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 2e5f20c..c83701b 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -21,6 +21,8 @@
 #include <linux/of_device.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
 
 #define QSPI_COMMAND1				0x000
 #define QSPI_BIT_LENGTH(x)			(((x) & 0x1f) << 0)
@@ -771,7 +773,7 @@ static u32 tegra_qspi_setup_transfer_one(struct spi_device *spi, struct spi_tran
 	u32 tx_tap = 0, rx_tap = 0;
 	int req_mode;
 
-	if (speed != tqspi->cur_speed) {
+	if (!has_acpi_companion(tqspi->dev) && speed != tqspi->cur_speed) {
 		clk_set_rate(tqspi->clk, speed);
 		tqspi->cur_speed = speed;
 	}
@@ -879,16 +881,16 @@ static int tegra_qspi_start_transfer_one(struct spi_device *spi,
 static struct tegra_qspi_client_data *tegra_qspi_parse_cdata_dt(struct spi_device *spi)
 {
 	struct tegra_qspi_client_data *cdata;
-	struct device_node *slave_np = spi->dev.of_node;
 
 	cdata = devm_kzalloc(&spi->dev, sizeof(*cdata), GFP_KERNEL);
 	if (!cdata)
 		return NULL;
 
-	of_property_read_u32(slave_np, "nvidia,tx-clk-tap-delay",
-			     &cdata->tx_clk_tap_delay);
-	of_property_read_u32(slave_np, "nvidia,rx-clk-tap-delay",
-			     &cdata->rx_clk_tap_delay);
+	device_property_read_u32(&spi->dev, "nvidia,tx-clk-tap-delay",
+				 &cdata->tx_clk_tap_delay);
+	device_property_read_u32(&spi->dev, "nvidia,rx-clk-tap-delay",
+				 &cdata->rx_clk_tap_delay);
+
 	return cdata;
 }
 
@@ -1226,6 +1228,24 @@ static const struct of_device_id tegra_qspi_of_match[] = {
 
 MODULE_DEVICE_TABLE(of, tegra_qspi_of_match);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id tegra_qspi_acpi_match[] = {
+	{
+		.id = "NVDA1213",
+		.driver_data = (kernel_ulong_t)&tegra210_qspi_soc_data,
+	}, {
+		.id = "NVDA1313",
+		.driver_data = (kernel_ulong_t)&tegra186_qspi_soc_data,
+	}, {
+		.id = "NVDA1413",
+		.driver_data = (kernel_ulong_t)&tegra234_qspi_soc_data,
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, tegra_qspi_acpi_match);
+#endif
+
 static int tegra_qspi_probe(struct platform_device *pdev)
 {
 	struct spi_master	*master;
@@ -1266,11 +1286,14 @@ static int tegra_qspi_probe(struct platform_device *pdev)
 	qspi_irq = platform_get_irq(pdev, 0);
 	tqspi->irq = qspi_irq;
 
-	tqspi->clk = devm_clk_get(&pdev->dev, "qspi");
-	if (IS_ERR(tqspi->clk)) {
-		ret = PTR_ERR(tqspi->clk);
-		dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
-		return ret;
+	if (!has_acpi_companion(tqspi->dev)) {
+		tqspi->clk = devm_clk_get(&pdev->dev, "qspi");
+		if (IS_ERR(tqspi->clk)) {
+			ret = PTR_ERR(tqspi->clk);
+			dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
+			return ret;
+		}
+
 	}
 
 	tqspi->max_buf_size = QSPI_FIFO_DEPTH << 2;
@@ -1373,6 +1396,8 @@ static int __maybe_unused tegra_qspi_runtime_suspend(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_qspi *tqspi = spi_master_get_devdata(master);
 
+	if (has_acpi_companion(tqspi->dev))
+		return 0;
 	/* flush all write which are in PPSB queue by reading back */
 	tegra_qspi_readl(tqspi, QSPI_COMMAND1);
 
@@ -1387,6 +1412,8 @@ static int __maybe_unused tegra_qspi_runtime_resume(struct device *dev)
 	struct tegra_qspi *tqspi = spi_master_get_devdata(master);
 	int ret;
 
+	if (has_acpi_companion(tqspi->dev))
+		return 0;
 	ret = clk_prepare_enable(tqspi->clk);
 	if (ret < 0)
 		dev_err(tqspi->dev, "failed to enable clock: %d\n", ret);
@@ -1404,6 +1431,7 @@ static struct platform_driver tegra_qspi_driver = {
 		.name		= "tegra-qspi",
 		.pm		= &tegra_qspi_pm_ops,
 		.of_match_table	= tegra_qspi_of_match,
+		.acpi_match_table = ACPI_PTR(tegra_qspi_acpi_match),
 	},
 	.probe =	tegra_qspi_probe,
 	.remove =	tegra_qspi_remove,
-- 
2.7.4


  parent reply	other threads:[~2022-02-04 10:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04 10:29 [PATCH 0/6] Tegra QUAD SPI combined sequence mode Krishna Yarlagadda
2022-02-04 10:29 ` [PATCH 1/6] spi: tegra210-quad: use device_reset method Krishna Yarlagadda
2022-02-04 10:29 ` [PATCH 2/6] dt-bindings: spi: Tegra234 QUAD SPI compatible Krishna Yarlagadda
2022-02-11 14:48   ` Rob Herring
2022-02-14 16:18   ` [PATCH 2/6] " Mark Brown
2022-02-04 10:29 ` [PATCH 3/6] spi: tegra210-quad: add new chips to compatible Krishna Yarlagadda
2022-02-04 10:29 ` Krishna Yarlagadda [this message]
2022-02-04 10:29 ` [PATCH 5/6] dt-bindings: spi: Tegra QUAD SPI combined sequence Krishna Yarlagadda
2022-02-04 13:47   ` Mark Brown
2022-02-04 10:29 ` [PATCH 6/6] spi: tegra210-quad: combined sequence mode Krishna Yarlagadda
2022-02-04 14:09   ` Mark Brown
2022-02-07 14:54     ` Krishna Yarlagadda
2022-02-07 15:05       ` Mark Brown
2022-02-07 15:40         ` Krishna Yarlagadda
2022-02-24 22:59 ` (subset) [PATCH 0/6] Tegra QUAD SPI " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1643970576-31503-5-git-send-email-kyarlagadda@nvidia.com \
    --to=kyarlagadda@nvidia.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=skomatineni@nvidia.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®