mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "irqchip-bot for Alexandre Torgue" <tip-bot2@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Marc Zyngier <maz@kernel.org>,
	tglx@linutronix.de
Subject: [irqchip: irq/irqchip-next] irqchip/stm32-exti: Add STM32MP13 support
Date: Wed, 09 Feb 2022 16:17:49 -0000	[thread overview]
Message-ID: <164442346932.16921.10963525223069470489.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220202140005.860-3-alexandre.torgue@foss.st.com>

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     04133bb1e710bc3d5532694999fbb3d0f1421724
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/04133bb1e710bc3d5532694999fbb3d0f1421724
Author:        Alexandre Torgue <alexandre.torgue@foss.st.com>
AuthorDate:    Wed, 02 Feb 2022 15:00:04 +01:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Wed, 09 Feb 2022 13:43:07 

irqchip/stm32-exti: Add STM32MP13 support

Enhance stm32-exti driver to support STM32MP13 SoC. This SoC uses the same
hardware version than STM32MP15. Only EXTI line mapping is changed and
following EXTI lines are supported: GPIO, RTC, I2C[1-5], UxART[1-8],
USBH_EHCI, USBH_OHCI, USB_OTG, LPTIM[1-5], ETH[1-2].

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220202140005.860-3-alexandre.torgue@foss.st.com
---
 drivers/irqchip/irq-stm32-exti.c | 50 +++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+)

diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index b7cb2da..9d18f47 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
@@ -214,6 +214,48 @@ static const struct stm32_desc_irq stm32mp1_desc_irq[] = {
 	{ .exti = 73, .irq_parent = 129, .chip = &stm32_exti_h_chip },
 };
 
+static const struct stm32_desc_irq stm32mp13_desc_irq[] = {
+	{ .exti = 0, .irq_parent = 6, .chip = &stm32_exti_h_chip },
+	{ .exti = 1, .irq_parent = 7, .chip = &stm32_exti_h_chip },
+	{ .exti = 2, .irq_parent = 8, .chip = &stm32_exti_h_chip },
+	{ .exti = 3, .irq_parent = 9, .chip = &stm32_exti_h_chip },
+	{ .exti = 4, .irq_parent = 10, .chip = &stm32_exti_h_chip },
+	{ .exti = 5, .irq_parent = 24, .chip = &stm32_exti_h_chip },
+	{ .exti = 6, .irq_parent = 65, .chip = &stm32_exti_h_chip },
+	{ .exti = 7, .irq_parent = 66, .chip = &stm32_exti_h_chip },
+	{ .exti = 8, .irq_parent = 67, .chip = &stm32_exti_h_chip },
+	{ .exti = 9, .irq_parent = 68, .chip = &stm32_exti_h_chip },
+	{ .exti = 10, .irq_parent = 41, .chip = &stm32_exti_h_chip },
+	{ .exti = 11, .irq_parent = 43, .chip = &stm32_exti_h_chip },
+	{ .exti = 12, .irq_parent = 77, .chip = &stm32_exti_h_chip },
+	{ .exti = 13, .irq_parent = 78, .chip = &stm32_exti_h_chip },
+	{ .exti = 14, .irq_parent = 106, .chip = &stm32_exti_h_chip },
+	{ .exti = 15, .irq_parent = 109, .chip = &stm32_exti_h_chip },
+	{ .exti = 16, .irq_parent = 1, .chip = &stm32_exti_h_chip },
+	{ .exti = 19, .irq_parent = 3, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 21, .irq_parent = 32, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 22, .irq_parent = 34, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 23, .irq_parent = 73, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 24, .irq_parent = 93, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 25, .irq_parent = 114, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 26, .irq_parent = 38, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 27, .irq_parent = 39, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 28, .irq_parent = 40, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 29, .irq_parent = 72, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 30, .irq_parent = 53, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 31, .irq_parent = 54, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 32, .irq_parent = 83, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 33, .irq_parent = 84, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 44, .irq_parent = 96, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 47, .irq_parent = 92, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 48, .irq_parent = 116, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 50, .irq_parent = 117, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 52, .irq_parent = 118, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 53, .irq_parent = 119, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 68, .irq_parent = 63, .chip = &stm32_exti_h_chip_direct },
+	{ .exti = 70, .irq_parent = 98, .chip = &stm32_exti_h_chip_direct },
+};
+
 static const struct stm32_exti_drv_data stm32mp1_drv_data = {
 	.exti_banks = stm32mp1_exti_banks,
 	.bank_nr = ARRAY_SIZE(stm32mp1_exti_banks),
@@ -221,6 +263,13 @@ static const struct stm32_exti_drv_data stm32mp1_drv_data = {
 	.irq_nr = ARRAY_SIZE(stm32mp1_desc_irq),
 };
 
+static const struct stm32_exti_drv_data stm32mp13_drv_data = {
+	.exti_banks = stm32mp1_exti_banks,
+	.bank_nr = ARRAY_SIZE(stm32mp1_exti_banks),
+	.desc_irqs = stm32mp13_desc_irq,
+	.irq_nr = ARRAY_SIZE(stm32mp13_desc_irq),
+};
+
 static const struct
 stm32_desc_irq *stm32_exti_get_desc(const struct stm32_exti_drv_data *drv_data,
 				    irq_hw_number_t hwirq)
@@ -922,6 +971,7 @@ static int stm32_exti_probe(struct platform_device *pdev)
 /* platform driver only for MP1 */
 static const struct of_device_id stm32_exti_ids[] = {
 	{ .compatible = "st,stm32mp1-exti", .data = &stm32mp1_drv_data},
+	{ .compatible = "st,stm32mp13-exti", .data = &stm32mp13_drv_data},
 	{},
 };
 MODULE_DEVICE_TABLE(of, stm32_exti_ids);

  reply	other threads:[~2022-02-09 16:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-02 14:00 [PATCH v3 0/3] Add STM32MP13 EXTI support Alexandre Torgue
2022-02-02 14:00 ` [PATCH v3 1/3] dt-bindings: interrupt-controller: stm32-exti: document st,stm32mp13-exti Alexandre Torgue
2022-02-07 21:45   ` Rob Herring
2022-02-09 16:17   ` [irqchip: irq/irqchip-next] " irqchip-bot for Alexandre Torgue
2022-02-02 14:00 ` [PATCH v3 2/3] irqchip/stm32-exti: add STM32MP13 support Alexandre Torgue
2022-02-09 16:17   ` irqchip-bot for Alexandre Torgue [this message]
2022-02-02 14:00 ` [PATCH v3 3/3] ARM: dts: stm32: Enable EXTI on stm32mp13 Alexandre Torgue
2022-02-09 16:17   ` [irqchip: irq/irqchip-next] " irqchip-bot for Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=164442346932.16921.10963525223069470489.tip-bot2@tip-bot2 \
    --to=tip-bot2@linutronix.de \
    --cc=alexandre.torgue@foss.st.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®