From: Daehwan Jung <dh10.jung@samsung.com>
To: Mathias Nyman <mathias.nyman@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org (open list:USB XHCI DRIVER),
linux-kernel@vger.kernel.org (open list),
Howard Yen <howardyen@google.com>,
Jack Pham <jackp@codeaurora.org>, Puma Hsu <pumahsu@google.com>,
"J . Avila" <elavila@google.com>,
Daehwan Jung <dh10.jung@samsung.com>,
sc.suh@samsung.com, cpgs@samsung.com, cpgsproxy5@samsung.com
Subject: [PATCH v2 3/4] usb: host: add some to xhci overrides for USB offload
Date: Mon, 7 Mar 2022 19:17:35 +0900 [thread overview]
Message-ID: <1646648256-105214-4-git-send-email-dh10.jung@samsung.com> (raw)
In-Reply-To: <1646648256-105214-1-git-send-email-dh10.jung@samsung.com>
Co-processor needs some information about connected usb device.
It's proper to pass information after usb device gets address when
getting "Set Address" command. It supports vendors to implement it
using xhci overrides. There're several power scenarios depending
on vendors. It gives vendors flexibilty to meet their power requirement.
They can override suspend and resume of root hub.
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
---
drivers/usb/host/xhci.c | 6 ++++++
drivers/usb/host/xhci.h | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3f82df2c5be1..38a030d04851 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5558,6 +5558,12 @@ void xhci_init_driver(struct hc_driver *drv,
drv->check_bandwidth = over->check_bandwidth;
if (over->reset_bandwidth)
drv->reset_bandwidth = over->reset_bandwidth;
+ if (over->address_device)
+ drv->address_device = over->address_device;
+ if (over->bus_suspend)
+ drv->bus_suspend = over->bus_suspend;
+ if (over->bus_resume)
+ drv->bus_resume = over->bus_resume;
}
}
EXPORT_SYMBOL_GPL(xhci_init_driver);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e2ed4f88ae4b..e6fd53e36889 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1947,6 +1947,9 @@ struct xhci_driver_overrides {
struct usb_host_endpoint *ep);
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ int (*address_device)(struct usb_hcd *hcd, struct usb_device *udev);
+ int (*bus_suspend)(struct usb_hcd *hcd);
+ int (*bus_resume)(struct usb_hcd *hcd);
};
#define XHCI_CFC_DELAY 10
@@ -2103,6 +2106,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
int xhci_ext_cap_init(struct xhci_hcd *xhci);
--
2.31.1
next prev parent reply other threads:[~2022-03-07 10:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220307101848epcas2p1bc9c7992d4b25f78b37c7ca4672f1066@epcas2p1.samsung.com>
2022-03-07 10:17 ` [PATCH v2 0/4] support USB offload feature Daehwan Jung
[not found] ` <CGME20220307101850epcas2p4ac4158cd821031464cd3aa6eb4e5d2a7@epcas2p4.samsung.com>
2022-03-07 10:17 ` [PATCH v2 1/4] usb: host: export symbols for xhci hooks usage Daehwan Jung
2022-03-08 15:38 ` Krzysztof Kozlowski
[not found] ` <CGME20220307101850epcas2p3e944ac6a7d1ef0b96c3777b87731d02f@epcas2p3.samsung.com>
2022-03-07 10:17 ` [PATCH v2 2/4] usb: host: add xhci hooks for USB offload Daehwan Jung
[not found] ` <CGME20220307101851epcas2p4c26eaf8ed7f940db8c42cb3b63ff5331@epcas2p4.samsung.com>
2022-03-07 10:17 ` Daehwan Jung [this message]
[not found] ` <CGME20220307101852epcas2p2639761a90e794f0b4a4a842a17ba534e@epcas2p2.samsung.com>
2022-03-07 10:17 ` [PATCH v2 4/4] usb: host: add xhci-exynos module Daehwan Jung
2022-03-07 10:31 ` Greg Kroah-Hartman
2022-03-07 16:42 ` Christoph Hellwig
2022-03-08 15:37 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1646648256-105214-4-git-send-email-dh10.jung@samsung.com \
--to=dh10.jung@samsung.com \
--cc=cpgs@samsung.com \
--cc=cpgsproxy5@samsung.com \
--cc=elavila@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=howardyen@google.com \
--cc=jackp@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=pumahsu@google.com \
--cc=sc.suh@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®