From: Rohit Agarwal <quic_rohiagar@quicinc.com>
To: agross@kernel.org, bjorn.andersson@linaro.org,
gregkh@linuxfoundation.org, robh+dt@kernel.org,
krzk+dt@kernel.org
Cc: manivannan.sadhasivam@linaro.org, linux-arm-msm@vger.kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Rohit Agarwal <quic_rohiagar@quicinc.com>
Subject: [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support
Date: Tue, 12 Apr 2022 16:33:33 +0530 [thread overview]
Message-ID: <1649761414-19217-4-git-send-email-quic_rohiagar@quicinc.com> (raw)
In-Reply-To: <1649761414-19217-1-git-send-email-quic_rohiagar@quicinc.com>
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
SNPS HS PHY on SDX65.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 3e4dc63..e419e47 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -130,6 +130,7 @@
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -143,6 +144,45 @@
status = "disabled";
};
+ usb_hsphy: hsphy@ff4000 {
+ compatible = "qcom,usb-snps-hs-7nm-phy";
+ reg = <0xff4000 0x120>;
+ #phy-cells = <0>;
+ status = "disabled";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c8>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6e00 0x160>,
+ <0x00ff7000 0x1ec>,
+ <0x00ff6200 0x1e00>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
system_noc: interconnect@1620000 {
compatible = "qcom,sdx65-system-noc";
reg = <0x1620000 0x31200>;
@@ -182,6 +222,49 @@
status = "disabled";
};
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 18 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "ss_phy_irq", "dm_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
--
2.7.4
next prev parent reply other threads:[~2022-04-12 12:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, " Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
2022-04-12 11:19 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
2022-04-12 11:20 ` Krzysztof Kozlowski
2022-04-12 11:03 ` Rohit Agarwal [this message]
2022-04-12 11:21 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable " Rohit Agarwal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1649761414-19217-4-git-send-email-quic_rohiagar@quicinc.com \
--to=quic_rohiagar@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®