From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
<quic_plai@quicinc.com>, <bgoswami@quicinc.com>, <perex@perex.cz>,
<tiwai@suse.com>, <srinivas.kandagatla@linaro.org>,
<quic_rohkumar@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
<alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
<swboyd@chromium.org>, <judyhsiao@chromium.org>,
<devicetree@vger.kernel.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Subject: [PATCH 2/2] ASoC: qcom: Add driver support for audioreach solution
Date: Wed, 22 Jun 2022 15:43:19 +0530 [thread overview]
Message-ID: <1655892799-29641-3-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1655892799-29641-1-git-send-email-quic_srivasam@quicinc.com>
Add Machine driver support for audioreach solution, which uses
ADSP in SC7280 based paltforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
---
sound/soc/qcom/sc7280.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
index 34cdb99..abe261c 100644
--- a/sound/soc/qcom/sc7280.c
+++ b/sound/soc/qcom/sc7280.c
@@ -19,9 +19,11 @@
#include "../codecs/rt5682s.h"
#include "common.h"
#include "lpass.h"
+#include "qdsp6/q6afe.h"
#define DEFAULT_MCLK_RATE 19200000
#define RT5682_PLL_FREQ (48000 * 512)
+#define MI2S_BCLK_RATE 1536000
struct sc7280_snd_data {
struct snd_soc_card card;
@@ -79,6 +81,7 @@ static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
case MI2S_PRIMARY:
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case TX_CODEC_DMA_TX_3:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
rval = snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
if (rval != 0 && rval != -ENOTSUPP) {
@@ -164,10 +167,14 @@ static int sc7280_init(struct snd_soc_pcm_runtime *rtd)
switch (cpu_dai->id) {
case MI2S_PRIMARY:
case LPASS_CDC_DMA_TX3:
+ case TX_CODEC_DMA_TX_3:
return sc7280_headset_init(rtd);
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_VA_TX0:
case MI2S_SECONDARY:
+ case RX_CODEC_DMA_RX_0:
+ case SECONDARY_MI2S_RX:
+ case VA_CODEC_DMA_TX_0:
return 0;
case LPASS_DP_RX:
return sc7280_hdmi_init(rtd);
@@ -195,6 +202,10 @@ static int sc7280_snd_hw_params(struct snd_pcm_substream *substream,
switch (cpu_dai->id) {
case LPASS_CDC_DMA_TX3:
case LPASS_CDC_DMA_RX0:
+ case RX_CODEC_DMA_RX_0:
+ case SECONDARY_MI2S_RX:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
if (sruntime != ERR_PTR(-ENOTSUPP))
@@ -245,6 +256,9 @@ static int sc7280_snd_prepare(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case RX_CODEC_DMA_RX_0:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
return sc7280_snd_swr_prepare(substream);
default:
break;
@@ -263,6 +277,9 @@ static int sc7280_snd_hw_free(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case LPASS_CDC_DMA_RX0:
case LPASS_CDC_DMA_TX3:
+ case RX_CODEC_DMA_RX_0:
+ case TX_CODEC_DMA_TX_3:
+ case VA_CODEC_DMA_TX_0:
if (sruntime && data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
@@ -291,6 +308,10 @@ static void sc7280_snd_shutdown(struct snd_pcm_substream *substream)
SNDRV_PCM_STREAM_PLAYBACK);
}
break;
+ case SECONDARY_MI2S_RX:
+ snd_soc_dai_set_sysclk(cpu_dai, Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+ 0, SNDRV_PCM_STREAM_PLAYBACK);
+ break;
default:
break;
}
@@ -298,14 +319,26 @@ static void sc7280_snd_shutdown(struct snd_pcm_substream *substream)
static int sc7280_snd_startup(struct snd_pcm_substream *substream)
{
+ unsigned int fmt = SND_SOC_DAIFMT_CBS_CFS;
+ unsigned int codec_dai_fmt = SND_SOC_DAIFMT_CBS_CFS;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
int ret = 0;
switch (cpu_dai->id) {
case MI2S_PRIMARY:
ret = sc7280_rt5682_init(rtd);
break;
+ case SECONDARY_MI2S_RX:
+ codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
+
+ snd_soc_dai_set_sysclk(cpu_dai, Q6AFE_LPASS_CLK_ID_SEC_MI2S_IBIT,
+ MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+
+ snd_soc_dai_set_fmt(cpu_dai, fmt);
+ snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+ break;
default:
break;
}
@@ -361,6 +394,7 @@ static int sc7280_snd_platform_probe(struct platform_device *pdev)
static const struct of_device_id sc7280_snd_device_id[] = {
{ .compatible = "google,sc7280-herobrine" },
+ { .compatible = "google,sc7280-audioreach-herobrine" },
{}
};
MODULE_DEVICE_TABLE(of, sc7280_snd_device_id);
--
2.7.4
prev parent reply other threads:[~2022-06-22 10:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-22 10:13 [PATCH 0/2] Update machine driver " Srinivasa Rao Mandadapu
2022-06-22 10:13 ` [PATCH 1/2] ASoC: google: dt-bindings: Update sc7280-audioreach-herobrine compatible name Srinivasa Rao Mandadapu
2022-06-22 12:46 ` Mark Brown
2022-06-27 3:59 ` Srinivasa Rao Mandadapu
2022-06-22 10:13 ` Srinivasa Rao Mandadapu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1655892799-29641-3-git-send-email-quic_srivasam@quicinc.com \
--to=quic_srivasam@quicinc.com \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@quicinc.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=judyhsiao@chromium.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=quic_plai@quicinc.com \
--cc=quic_rohkumar@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®