From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Masami Hiramatsu <mhiramat@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH 7/9] arm64: dts: uniphier: Add USB-device support for PXs3 reference board
Date: Mon, 4 Jul 2022 09:21:12 +0900 [thread overview]
Message-ID: <1656894074-15751-8-git-send-email-hayashi.kunihiko@socionext.com> (raw)
In-Reply-To: <1656894074-15751-1-git-send-email-hayashi.kunihiko@socionext.com>
PXs3 reference board can change each USB port 0 and 1 to device mode
with jumpers. Prepare devicetree sources for USB port 0 and 1.
This specifies dr_mode, pinctrl, and some quirks and removes nodes for
unused phys and vbus-supply properties.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
arch/arm/boot/dts/uniphier-pinctrl.dtsi | 10 +++++
arch/arm64/boot/dts/socionext/Makefile | 4 +-
.../socionext/uniphier-pxs3-ref-gadget0.dts | 41 +++++++++++++++++++
.../socionext/uniphier-pxs3-ref-gadget1.dts | 40 ++++++++++++++++++
4 files changed, 94 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
create mode 100644 arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index c0fd029b37e5..f909ec2e5333 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -196,11 +196,21 @@ pinctrl_usb0: usb0 {
function = "usb0";
};
+ pinctrl_usb0_device: usb0-device {
+ groups = "usb0_device";
+ function = "usb0";
+ };
+
pinctrl_usb1: usb1 {
groups = "usb1";
function = "usb1";
};
+ pinctrl_usb1_device: usb1-device {
+ groups = "usb1_device";
+ function = "usb1";
+ };
+
pinctrl_usb2: usb2 {
groups = "usb2";
function = "usb2";
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index dda3da33614b..33989a9643ac 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -5,4 +5,6 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld20-akebi96.dtb \
uniphier-ld20-global.dtb \
uniphier-ld20-ref.dtb \
- uniphier-pxs3-ref.dtb
+ uniphier-pxs3-ref.dtb \
+ uniphier-pxs3-ref-gadget0.dtb \
+ uniphier-pxs3-ref-gadget1.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
new file mode 100644
index 000000000000..7069f51bc120
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0)
+//
+// Copyright (C) 2021 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+ model = "UniPhier PXs3 Reference Board (USB-Device #0)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+ status = "disabled";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ pinctrl-0 = <&pinctrl_usb0_device>;
+ snps,dis_enblslpm_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2_gadget_lpm_disable;
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+};
+
+&usb0_hsphy0 {
+ /delete-property/ vbus-supply;
+};
+
+&usb0_ssphy0 {
+ /delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb0_hsphy1;
+/delete-node/ &usb0_ssphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
new file mode 100644
index 000000000000..a3cfa8113ffb
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1)
+//
+// Copyright (C) 2021 Socionext Inc.
+// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+ model = "UniPhier PXs3 Reference Board (USB-Device #1)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+ status = "disabled";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "peripheral";
+ pinctrl-0 = <&pinctrl_usb1_device>;
+ snps,dis_enblslpm_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2_gadget_lpm_disable;
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
+};
+
+&usb1_hsphy0 {
+ /delete-property/ vbus-supply;
+};
+
+&usb1_ssphy0 {
+ /delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb1_hsphy1;
--
2.25.1
next prev parent reply other threads:[~2022-07-04 0:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-04 0:21 [PATCH 0/9] Update UniPhier armv8 devicetree Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 1/9] arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 2/9] arm64: dts: uniphier: Rename pvtctl node to thermal-sensor Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 3/9] arm64: dts: uniphier: Rename usb-phy node to usb-glue Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 4/9] arm64: dts: uniphier: Rename gpio-hog nodes Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 5/9] arm64: dts: uniphier: Use GIC interrupt definitions Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 6/9] arm64: dts: uniphier: Add ahci controller and glue layer nodes for PXs3 Kunihiko Hayashi
2022-07-04 0:21 ` Kunihiko Hayashi [this message]
2022-07-04 0:21 ` [PATCH 8/9] arm64: dts: uniphier: Fix opp-table node name for LD20 Kunihiko Hayashi
2022-07-04 0:21 ` [PATCH 9/9] arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node Kunihiko Hayashi
2022-07-29 9:52 ` [PATCH 0/9] Update UniPhier armv8 devicetree Kunihiko Hayashi
2022-07-30 12:03 ` Arnd Bergmann
2022-08-02 13:24 ` Kunihiko Hayashi
2022-08-02 13:55 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1656894074-15751-8-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®