From: "tip-bot2 for Claudiu Beznea" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce
Date: Thu, 28 Jul 2022 10:44:13 -0000 [thread overview]
Message-ID: <165900505324.15455.10001237218485518496.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220609094041.1796372-2-claudiu.beznea@microchip.com>
The following commit has been merged into the timers/core branch of tip:
Commit-ID: 2c9c4c9e543de46a8031d5300e3036a3a89bad28
Gitweb: https://git.kernel.org/tip/2c9c4c9e543de46a8031d5300e3036a3a89bad28
Author: Claudiu Beznea <claudiu.beznea@microchip.com>
AuthorDate: Thu, 09 Jun 2022 12:40:39 +03:00
Committer: Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Sat, 16 Jul 2022 00:52:31 +02:00
clocksource/drivers/timer-microchip-pit64b: Remove suspend/resume ops for ce
Remove suspend and resume ops for clockevent and add set_state_oneshot()
instead. Along with this mchp_pit64b_{suspend, resume}() were called on
proper function to disable/enable clocks. This will allow disabling clocks
for clockevent in case it is not selected as active clockevent.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220609094041.1796372-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-microchip-pit64b.c | 30 ++++++++++---------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
index abce83d..b512593 100644
--- a/drivers/clocksource/timer-microchip-pit64b.c
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -173,7 +173,8 @@ static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+ if (!clockevent_state_detached(cedev))
+ mchp_pit64b_suspend(timer);
return 0;
}
@@ -182,35 +183,37 @@ static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
MCHP_PIT64B_IER_PERIOD);
return 0;
}
-static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
- struct clock_event_device *cedev)
+static int mchp_pit64b_clkevt_set_oneshot(struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ if (clockevent_state_shutdown(cedev))
+ mchp_pit64b_resume(timer);
+
+ mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_ONE_SHOT,
MCHP_PIT64B_IER_PERIOD);
return 0;
}
-static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
+static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+ struct clock_event_device *cedev)
{
struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
- mchp_pit64b_suspend(timer);
-}
-
-static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
-{
- struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+ mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ MCHP_PIT64B_IER_PERIOD);
- mchp_pit64b_resume(timer);
+ return 0;
}
static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
@@ -395,9 +398,8 @@ static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
ce->clkevt.rating = 150;
ce->clkevt.set_state_shutdown = mchp_pit64b_clkevt_shutdown;
ce->clkevt.set_state_periodic = mchp_pit64b_clkevt_set_periodic;
+ ce->clkevt.set_state_oneshot = mchp_pit64b_clkevt_set_oneshot;
ce->clkevt.set_next_event = mchp_pit64b_clkevt_set_next_event;
- ce->clkevt.suspend = mchp_pit64b_clkevt_suspend;
- ce->clkevt.resume = mchp_pit64b_clkevt_resume;
ce->clkevt.cpumask = cpumask_of(0);
ce->clkevt.irq = irq;
next prev parent reply other threads:[~2022-07-28 10:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 9:40 [RESEND][PATCH 0/3] clocksource/drivers/timer-microchip-pit64b: improve clock management Claudiu Beznea
2022-06-09 9:40 ` [RESEND][PATCH 1/3] clocksource/drivers/timer-microchip-pit64b: remove suspend/resume ops for ce Claudiu Beznea
2022-07-28 10:44 ` tip-bot2 for Claudiu Beznea [this message]
2022-06-09 9:40 ` [RESEND][PATCH 2/3] clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend, resume} Claudiu Beznea
2022-07-28 10:44 ` [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Use " tip-bot2 for Claudiu Beznea
2022-06-09 9:40 ` [RESEND][PATCH 3/3] clocksource/drivers/timer-microchip-pit64b: fix compilation warnings Claudiu Beznea
2022-07-28 10:44 ` [tip: timers/core] clocksource/drivers/timer-microchip-pit64b: Fix " tip-bot2 for Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=165900505324.15455.10001237218485518496.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=claudiu.beznea@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®