mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: margeyang <marge.yang@synaptics.corp-partner.google.com>
To: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, hdegoede@redhat.com,
	benjamin.tissoires@redhat.com
Cc: marge.yang@tw.synaptics.com, derek.cheng@tw.synaptics.com,
	vincent.huang@tw.synaptics.com,
	Marge Yang <marge.yang@synaptics.corp-partner.google.com>
Subject: [PATCH V4] Input: synaptics-rmi4 - filter incomplete relative packet.
Date: Tue, 16 Aug 2022 17:20:49 +0800	[thread overview]
Message-ID: <1660641649-11929-1-git-send-email-marge.yang@synaptics.corp-partner.google.com> (raw)

From: Marge Yang <marge.yang@synaptics.corp-partner.google.com>

RMI4 F03 supports the Stick function,
it's designed to support relative packet.
This patch supports the following case.
When relative packet can't be reported completely,
it may miss one byte or two byte.
New Synaptics firmware will report PARITY error.
When timeout error or parity error happens,
RMI4 driver will sends 0xFE command and
ask FW to Re-send stick packet again.

Signed-off-by: Marge Yang<marge.yang@synaptics.corp-partner.google.com>
---
 drivers/input/rmi4/rmi_f03.c | 74 +++++++++++++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
index c194b1664b10..563b40c2dc06 100644
--- a/drivers/input/rmi4/rmi_f03.c
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -23,8 +23,12 @@
 #define RMI_F03_BYTES_PER_DEVICE_SHIFT	4
 #define RMI_F03_QUEUE_LENGTH		0x0F
 
+#define RMI_F03_RESET_STYK		0xFE
+
 #define PSMOUSE_OOB_EXTRA_BTNS		0x01
 
+#define RELATIVE_PACKET_SIZE		3
+
 struct f03_data {
 	struct rmi_function *fn;
 
@@ -33,6 +37,11 @@ struct f03_data {
 
 	unsigned int overwrite_buttons;
 
+	int iwritecommandcounter;
+	unsigned int ipacketindex;
+	unsigned int serio_flagsArry[RELATIVE_PACKET_SIZE];
+	u8 ob_dataArry[RELATIVE_PACKET_SIZE];
+
 	u8 device_count;
 	u8 rx_queue_length;
 };
@@ -88,6 +97,7 @@ static int rmi_f03_pt_write(struct serio *id, unsigned char val)
 		return error;
 	}
 
+	f03->iwritecommandcounter++;
 	return 0;
 }
 
@@ -107,6 +117,8 @@ static int rmi_f03_initialize(struct f03_data *f03)
 		return error;
 	}
 
+	f03->iwritecommandcounter = 0;
+	f03->ipacketindex = 0;
 	f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
 	bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
 				RMI_F03_BYTES_PER_DEVICE;
@@ -284,6 +296,22 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
 		ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
 		serio_flags = 0;
 
+		if (ob_status & (RMI_F03_OB_FLAG_TIMEOUT | RMI_F03_OB_FLAG_PARITY)) {
+			//  Send resend command to stick when timeout or parity error.
+			//  Driver can receive the last stick packet.
+			unsigned char val = RMI_F03_RESET_STYK;
+
+			error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
+			if (error) {
+				dev_err(&f03->fn->dev,
+					"%s: Failed to rmi_write to F03 TX register (%d).\n",
+					__func__, error);
+				return error;
+			}
+			f03->ipacketindex = 0;
+			break;
+		}
+
 		if (!(ob_status & RMI_F03_RX_DATA_OFB))
 			continue;
 
@@ -298,7 +326,51 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
 			serio_flags & SERIO_TIMEOUT ?  'Y' : 'N',
 			serio_flags & SERIO_PARITY ? 'Y' : 'N');
 
-		serio_interrupt(f03->serio, ob_data, serio_flags);
+		if (f03->iwritecommandcounter > 0) {
+			// Read Acknowledge Byte after writing the PS2 command.
+			// It is not trackpoint data.
+			serio_interrupt(f03->serio, ob_data, serio_flags);
+		} else {
+			//   The relative-mode PS/2 packet format is as follows:
+			//
+			//              bit position            position (as array of bytes)
+			//     7   6   5   4   3   2   1   0
+			//   =================================+
+			//    Yov Xov DY8 DX8  1   M   R   L  | DATA[0]
+			//                DX[7:0]             | DATA[1]
+			//                DY[7:0]             | DATA[2]
+			//   =================================+
+			//		Yov: Y overflow
+			//    Xov: X overflow
+			if ((f03->ipacketindex == 0) && (ob_data & ((BIT(7)|BIT(6))))) {
+				dev_err(&f03->fn->dev,
+				"%s: X or Y is overflow. (%x)\n",
+				__func__, ob_data);
+				break;
+			} else if ((f03->ipacketindex == 0) && !(ob_data & BIT(3))) {
+				dev_err(&f03->fn->dev,
+				"%s: New BIT 3 is not 1 for the first byte\n",
+				__func__);
+				break;
+			}
+			f03->ob_dataArry[f03->ipacketindex] = ob_data;
+			f03->serio_flagsArry[f03->ipacketindex] = serio_flags;
+			f03->ipacketindex++;
+
+			if (f03->ipacketindex == RELATIVE_PACKET_SIZE)	{
+				serio_interrupt(f03->serio, f03->ob_dataArry[0],
+				 f03->serio_flagsArry[0]);
+				serio_interrupt(f03->serio, f03->ob_dataArry[1],
+				 f03->serio_flagsArry[1]);
+				serio_interrupt(f03->serio, f03->ob_dataArry[2],
+				 f03->serio_flagsArry[2]);
+				f03->ipacketindex = 0;
+			}
+		}
+	}
+	if (f03->iwritecommandcounter > 0) {
+		f03->ipacketindex = 0;
+		f03->iwritecommandcounter = f03->iwritecommandcounter - 1;
 	}
 
 	return IRQ_HANDLED;
-- 
2.22.0.windows.1


             reply	other threads:[~2022-08-16 10:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-16  9:20 margeyang [this message]
2022-08-17 14:11 ` Hans de Goede
2022-11-04 10:29   ` Marge Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1660641649-11929-1-git-send-email-marge.yang@synaptics.corp-partner.google.com \
    --to=marge.yang@synaptics.corp-partner.google.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=derek.cheng@tw.synaptics.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marge.yang@tw.synaptics.com \
    --cc=vincent.huang@tw.synaptics.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®