From: "tip-bot2 for Thomas Gleixner" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Thomas Gleixner <tglx@linutronix.de>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: sched/rt] preempt: Provide preempt_[dis|en]able_nested()
Date: Mon, 19 Sep 2022 12:37:58 -0000 [thread overview]
Message-ID: <166359107896.401.2211439257484206458.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220825164131.402717-2-bigeasy@linutronix.de>
The following commit has been merged into the sched/rt branch of tip:
Commit-ID: 555bb4ccd1dd78d0263eae31629fe1fdd65c1fb5
Gitweb: https://git.kernel.org/tip/555bb4ccd1dd78d0263eae31629fe1fdd65c1fb5
Author: Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Thu, 25 Aug 2022 18:41:24 +02:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Mon, 19 Sep 2022 14:35:07 +02:00
preempt: Provide preempt_[dis|en]able_nested()
On PREEMPT_RT enabled kernels, spinlocks and rwlocks are neither disabling
preemption nor interrupts. Though there are a few places which depend on
the implicit preemption/interrupt disable of those locks, e.g. seqcount
write sections, per CPU statistics updates etc.
To avoid sprinkling CONFIG_PREEMPT_RT conditionals all over the place, add
preempt_disable_nested() and preempt_enable_nested() which should be
descriptive enough.
Add a lockdep assertion for the !PREEMPT_RT case to catch callers which
do not have preemption disabled.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220825164131.402717-2-bigeasy@linutronix.de
---
include/linux/preempt.h | 42 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+)
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index b4381f2..0df425b 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -421,4 +421,46 @@ static inline void migrate_enable(void) { }
#endif /* CONFIG_SMP */
+/**
+ * preempt_disable_nested - Disable preemption inside a normally preempt disabled section
+ *
+ * Use for code which requires preemption protection inside a critical
+ * section which has preemption disabled implicitly on non-PREEMPT_RT
+ * enabled kernels, by e.g.:
+ * - holding a spinlock/rwlock
+ * - soft interrupt context
+ * - regular interrupt handlers
+ *
+ * On PREEMPT_RT enabled kernels spinlock/rwlock held sections, soft
+ * interrupt context and regular interrupt handlers are preemptible and
+ * only prevent migration. preempt_disable_nested() ensures that preemption
+ * is disabled for cases which require CPU local serialization even on
+ * PREEMPT_RT. For non-PREEMPT_RT kernels this is a NOP.
+ *
+ * The use cases are code sequences which are not serialized by a
+ * particular lock instance, e.g.:
+ * - seqcount write side critical sections where the seqcount is not
+ * associated to a particular lock and therefore the automatic
+ * protection mechanism does not work. This prevents a live lock
+ * against a preempting high priority reader.
+ * - RMW per CPU variable updates like vmstat.
+ */
+/* Macro to avoid header recursion hell vs. lockdep */
+#define preempt_disable_nested() \
+do { \
+ if (IS_ENABLED(CONFIG_PREEMPT_RT)) \
+ preempt_disable(); \
+ else \
+ lockdep_assert_preemption_disabled(); \
+} while (0)
+
+/**
+ * preempt_enable_nested - Undo the effect of preempt_disable_nested()
+ */
+static __always_inline void preempt_enable_nested(void)
+{
+ if (IS_ENABLED(CONFIG_PREEMPT_RT))
+ preempt_enable();
+}
+
#endif /* __LINUX_PREEMPT_H */
next prev parent reply other threads:[~2022-09-19 12:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-25 16:41 [PATCH v2 0/8] Replace PREEMPT_RT ifdefs with preempt_[dis|en]able_nested() Sebastian Andrzej Siewior
2022-08-25 16:41 ` [PATCH v2 1/8] preempt: Provide preempt_[dis|en]able_nested() Sebastian Andrzej Siewior
2022-09-19 12:37 ` tip-bot2 for Thomas Gleixner [this message]
2022-08-25 16:41 ` [PATCH v2 2/8] dentry: Use preempt_[dis|en]able_nested() Sebastian Andrzej Siewior
2022-08-26 7:52 ` Christian Brauner
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2022-08-25 16:41 ` [PATCH v2 3/8] mm/vmstat: " Sebastian Andrzej Siewior
2022-09-01 14:41 ` Michal Hocko
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2022-08-25 16:41 ` [PATCH v2 4/8] mm/debug: Provide VM_WARN_ON_IRQS_ENABLED() Sebastian Andrzej Siewior
2022-09-01 14:41 ` Michal Hocko
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2022-08-25 16:41 ` [PATCH v2 5/8] mm/memcontrol: Replace the PREEMPT_RT conditionals Sebastian Andrzej Siewior
2022-09-01 14:45 ` Michal Hocko
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2022-08-25 16:41 ` [PATCH v2 6/8] mm/compaction: Get rid of RT ifdeffery Sebastian Andrzej Siewior
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
2022-08-25 16:41 ` [PATCH v2 7/8] flex_proportions: Disable preemption entering the write section Sebastian Andrzej Siewior
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Sebastian Andrzej Siewior
2022-08-25 16:41 ` [PATCH v2 8/8] u64_stats: Streamline the implementation Sebastian Andrzej Siewior
2022-09-19 12:37 ` [tip: sched/rt] " tip-bot2 for Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=166359107896.401.2211439257484206458.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=bigeasy@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®