mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lizhi Hou <lizhi.hou@amd.com>
To: <vkoul@kernel.org>, <dmaengine@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <trix@redhat.com>
Cc: Lizhi Hou <lizhi.hou@amd.com>, <max.zhen@amd.com>,
	<sonal.santan@amd.com>, <larry.liu@amd.com>, <brian.xu@amd.com>,
	<tumic@gpxsee.org>
Subject: [PATCH V4 XDMA 2/2] dmaengine: xilinx: xdma: Add user logic interrupt support
Date: Thu, 22 Sep 2022 11:38:25 -0700	[thread overview]
Message-ID: <1663871905-60498-3-git-send-email-lizhi.hou@amd.com> (raw)
In-Reply-To: <1663871905-60498-1-git-send-email-lizhi.hou@amd.com>

The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to register/unregister interrupt handler for a given
interrupt wire index.

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
---
 MAINTAINERS                  |  1 +
 drivers/dma/xilinx/xdma.c    | 80 ++++++++++++++++++++++++++++++++++++
 include/linux/dma/amd_xdma.h | 17 ++++++++
 3 files changed, 98 insertions(+)
 create mode 100644 include/linux/dma/amd_xdma.h

diff --git a/MAINTAINERS b/MAINTAINERS
index c1be0b2e378a..019d84b2b086 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21691,6 +21691,7 @@ L:	dmaengine@vger.kernel.org
 S:	Supported
 F:	drivers/dma/xilinx/xdma-regs.h
 F:	drivers/dma/xilinx/xdma.c
+F:	include/linux/dma/amd_xdma.h
 F:	include/linux/platform_data/amd_xdma.h
 
 XILINX ZYNQMP DPDMA DRIVER
diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index 58a57e03bef5..884942cd2a37 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -25,6 +25,7 @@
 #include <linux/dmapool.h>
 #include <linux/regmap.h>
 #include <linux/dmaengine.h>
+#include <linux/dma/amd_xdma.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/amd_xdma.h>
 #include <linux/dma-mapping.h>
@@ -736,6 +737,7 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
 static int xdma_irq_init(struct xdma_device *xdev)
 {
 	u32 irq = xdev->irq_start;
+	u32 user_irq_start;
 	int i, j, ret;
 
 	/* return failure if there are not enough IRQs */
@@ -786,6 +788,18 @@ static int xdma_irq_init(struct xdma_device *xdev)
 		goto failed;
 	}
 
+	/* config user IRQ registers if needed */
+	user_irq_start = xdev->h2c_chan_num + xdev->c2h_chan_num;
+	if (xdev->irq_num > user_irq_start) {
+		ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
+					  user_irq_start,
+					  xdev->irq_num - user_irq_start);
+		if (ret) {
+			xdma_err(xdev, "failed to set user vectors: %d", ret);
+			goto failed;
+		}
+	}
+
 	/* enable interrupt */
 	ret = xdma_enable_intr(xdev);
 	if (ret) {
@@ -816,6 +830,72 @@ static bool xdma_filter_fn(struct dma_chan *chan, void *param)
 	return true;
 }
 
+/**
+ * xdma_free_user_irq - Free user interrupt
+ * @pdev: Pointer to the platform_device structure
+ * @user_irq_index: User IRQ index
+ * @arg: User interrupt cookie
+ */
+void xdma_free_user_irq(struct platform_device *pdev, u32 user_irq_index,
+			void *arg)
+{
+	struct xdma_device *xdev = platform_get_drvdata(pdev);
+	u32 user_irq;
+
+	user_irq = xdev->h2c_chan_num + xdev->c2h_chan_num + user_irq_index;
+	if (user_irq >= xdev->irq_num) {
+		xdma_err(xdev, "invalid user irq index");
+		return;
+	}
+	user_irq += xdev->irq_start;
+
+	xdma_write_reg(xdev, XDMA_IRQ_BASE, XDMA_IRQ_USER_INT_EN_W1C,
+		       (1 << user_irq_index));
+
+	free_irq(user_irq, arg);
+}
+EXPORT_SYMBOL(xdma_free_user_irq);
+
+/**
+ * xdma_request_user_irq - Register user interrupt
+ * @pdev: Pointer to the platform_device structure
+ * @user_irq_index: User IRQ index
+ * @flags: Handling flags
+ * @handler: User interrupt handler
+ * @arg: User interrupt cookie
+ */
+int xdma_request_user_irq(struct platform_device *pdev, u32 user_irq_index,
+			  irq_handler_t handler, void *arg, ulong flags)
+{
+	struct xdma_device *xdev = platform_get_drvdata(pdev);
+	u32 user_irq;
+	int ret;
+
+	user_irq = xdev->h2c_chan_num + xdev->c2h_chan_num + user_irq_index;
+	if (user_irq >= xdev->irq_num) {
+		xdma_err(xdev, "invalid user irq index");
+		return -EINVAL;
+	}
+	user_irq += xdev->irq_start;
+
+	ret = request_irq(user_irq, handler, flags, "xdma-user", arg);
+	if (ret) {
+		xdma_err(xdev, "request irq failed, %d", ret);
+		return ret;
+	}
+
+	ret = xdma_write_reg(xdev, XDMA_IRQ_BASE, XDMA_IRQ_USER_INT_EN_W1S,
+			     (1 << user_irq_index));
+	if (ret) {
+		xdma_err(xdev, "set user irq mask failed, %d", ret);
+		free_irq(user_irq, arg);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(xdma_request_user_irq);
+
 /**
  * xdma_remove - Driver remove function
  * @pdev: Pointer to the platform_device structure
diff --git a/include/linux/dma/amd_xdma.h b/include/linux/dma/amd_xdma.h
new file mode 100644
index 000000000000..b70486121ca6
--- /dev/null
+++ b/include/linux/dma/amd_xdma.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2022, Advanced Micro Devices, Inc.
+ */
+
+#ifndef _DMAENGINE_AMD_XDMA_H
+#define _DMAENGINE_AMD_XDMA_H
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+int xdma_request_user_irq(struct platform_device *pdev, u32 user_irq_index,
+			  irq_handler_t handler, void *arg, ulong flags);
+void xdma_free_user_irq(struct platform_device *pdev, u32 user_irq_index,
+			void *arg);
+
+#endif /* _DMAENGINE_AMD_XDMA_H */
-- 
2.27.0


  parent reply	other threads:[~2022-09-22 18:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-22 18:38 [PATCH V4 XDMA 0/2] xilinx XDMA driver Lizhi Hou
2022-09-22 18:38 ` [PATCH V4 XDMA 1/2] dmaengine: xilinx: xdma: Add xilinx xdma driver Lizhi Hou
2022-09-22 18:38 ` Lizhi Hou [this message]
2022-09-27 15:31   ` [PATCH V4 XDMA 2/2] dmaengine: xilinx: xdma: Add user logic interrupt support Martin Tůma
2022-09-27 16:28     ` Lizhi Hou
2022-09-27 16:46       ` Martin Tůma
2022-09-27 17:18         ` Lizhi Hou
2022-09-27 17:54           ` Martin Tůma
2022-09-27 18:14             ` Lizhi Hou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1663871905-60498-3-git-send-email-lizhi.hou@amd.com \
    --to=lizhi.hou@amd.com \
    --cc=brian.xu@amd.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=larry.liu@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=max.zhen@amd.com \
    --cc=sonal.santan@amd.com \
    --cc=trix@redhat.com \
    --cc=tumic@gpxsee.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®