From: "irqchip-bot for Vladimir Oltean" <tip-bot2@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
Marc Zyngier <maz@kernel.org>,
tglx@linutronix.de
Subject: [irqchip: irq/irqchip-fixes] irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
Date: Mon, 03 Oct 2022 15:35:05 -0000 [thread overview]
Message-ID: <166481130583.401.8575256351684594864.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220728144254.175385-1-vladimir.oltean@nxp.com>
The following commit has been merged into the irq/irqchip-fixes branch of irqchip:
Commit-ID: 1b00adce8afdb842615a5bf3774510f14a9b769a
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/1b00adce8afdb842615a5bf3774510f14a9b769a
Author: Vladimir Oltean <vladimir.oltean@nxp.com>
AuthorDate: Thu, 28 Jul 2022 17:42:54 +03:00
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 03 Oct 2022 16:29:17 +01:00
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The ls-extirq implementation, ls_extirq_irq_set_type(), uses an MMIO
regmap created by of_syscon_register(), which uses plain spinlocks
(the kind that are sleepable on RT).
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Make this driver ioremap its INTPCR register on its own, and stop
relying on syscon to provide a regmap.
Fixes: 0dcd9f872769 ("irqchip: Add support for Layerscape external interrupt lines")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[maz: trimmed down commit log]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220728144254.175385-1-vladimir.oltean@nxp.com
---
drivers/irqchip/irq-ls-extirq.c | 87 +++++++++++++++++++++++---------
1 file changed, 63 insertions(+), 24 deletions(-)
diff --git a/drivers/irqchip/irq-ls-extirq.c b/drivers/irqchip/irq-ls-extirq.c
index 853b397..d8d48b1 100644
--- a/drivers/irqchip/irq-ls-extirq.c
+++ b/drivers/irqchip/irq-ls-extirq.c
@@ -6,8 +6,7 @@
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -16,13 +15,41 @@
#define LS1021A_SCFGREVCR 0x200
struct ls_extirq_data {
- struct regmap *syscon;
- u32 intpcr;
+ void __iomem *intpcr;
+ raw_spinlock_t lock;
+ bool big_endian;
bool is_ls1021a_or_ls1043a;
u32 nirq;
struct irq_fwspec map[MAXIRQ];
};
+static void ls_extirq_intpcr_rmw(struct ls_extirq_data *priv, u32 mask,
+ u32 value)
+{
+ u32 intpcr;
+
+ /*
+ * Serialize concurrent calls to ls_extirq_set_type() from multiple
+ * IRQ descriptors, making sure the read-modify-write is atomic.
+ */
+ raw_spin_lock(&priv->lock);
+
+ if (priv->big_endian)
+ intpcr = ioread32be(priv->intpcr);
+ else
+ intpcr = ioread32(priv->intpcr);
+
+ intpcr &= ~mask;
+ intpcr |= value;
+
+ if (priv->big_endian)
+ iowrite32be(intpcr, priv->intpcr);
+ else
+ iowrite32(intpcr, priv->intpcr);
+
+ raw_spin_unlock(&priv->lock);
+}
+
static int
ls_extirq_set_type(struct irq_data *data, unsigned int type)
{
@@ -51,7 +78,8 @@ ls_extirq_set_type(struct irq_data *data, unsigned int type)
default:
return -EINVAL;
}
- regmap_update_bits(priv->syscon, priv->intpcr, mask, value);
+
+ ls_extirq_intpcr_rmw(priv, mask, value);
return irq_chip_set_type_parent(data, type);
}
@@ -143,7 +171,6 @@ ls_extirq_parse_map(struct ls_extirq_data *priv, struct device_node *node)
static int __init
ls_extirq_of_init(struct device_node *node, struct device_node *parent)
{
-
struct irq_domain *domain, *parent_domain;
struct ls_extirq_data *priv;
int ret;
@@ -151,40 +178,52 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("Cannot find parent domain\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_irq_find_host;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->syscon = syscon_node_to_regmap(node->parent);
- if (IS_ERR(priv->syscon)) {
- ret = PTR_ERR(priv->syscon);
- pr_err("Failed to lookup parent regmap\n");
- goto out;
+ if (!priv) {
+ ret = -ENOMEM;
+ goto err_alloc_priv;
}
- ret = of_property_read_u32(node, "reg", &priv->intpcr);
- if (ret) {
- pr_err("Missing INTPCR offset value\n");
- goto out;
+
+ /*
+ * All extirq OF nodes are under a scfg/syscon node with
+ * the 'ranges' property
+ */
+ priv->intpcr = of_iomap(node, 0);
+ if (!priv->intpcr) {
+ pr_err("Cannot ioremap OF node %pOF\n", node);
+ ret = -ENOMEM;
+ goto err_iomap;
}
ret = ls_extirq_parse_map(priv, node);
if (ret)
- goto out;
+ goto err_parse_map;
+ priv->big_endian = of_device_is_big_endian(parent);
priv->is_ls1021a_or_ls1043a = of_device_is_compatible(node, "fsl,ls1021a-extirq") ||
of_device_is_compatible(node, "fsl,ls1043a-extirq");
+ raw_spin_lock_init(&priv->lock);
domain = irq_domain_add_hierarchy(parent_domain, 0, priv->nirq, node,
&extirq_domain_ops, priv);
- if (!domain)
+ if (!domain) {
ret = -ENOMEM;
+ goto err_add_hierarchy;
+ }
-out:
- if (ret)
- kfree(priv);
+ return 0;
+
+err_add_hierarchy:
+err_parse_map:
+ iounmap(priv->intpcr);
+err_iomap:
+ kfree(priv);
+err_alloc_priv:
+err_irq_find_host:
return ret;
}
prev parent reply other threads:[~2022-10-03 15:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-28 14:42 [PATCH v4] irqchip/ls-extirq: fix " Vladimir Oltean
2022-07-28 15:25 ` Sean Anderson
2022-07-28 15:28 ` Vladimir Oltean
2022-07-28 15:43 ` Sean Anderson
2022-07-28 16:19 ` Vladimir Oltean
2022-07-28 16:31 ` Sean Anderson
2022-07-28 17:32 ` Marc Zyngier
2022-08-18 14:13 ` Vladimir Oltean
2022-10-03 9:45 ` Vladimir Oltean
2022-10-03 15:28 ` Marc Zyngier
2022-10-04 7:52 ` Rasmus Villemoes
2022-10-03 15:35 ` irqchip-bot for Vladimir Oltean [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=166481130583.401.8575256351684594864.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=tglx@linutronix.de \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®