Re: [RFCv2 PATCH 3/4] dt-bindings: gpio: add Wiegand GPIO driver dt documentation

[Rob Herring <robh@kernel.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1960 bytes --]

On Wed, 05 Oct 2022 16:57:45 +0200, Martin Zaťovič wrote:
> The Wiegand GPIO driver uses two GPIO lines to transmit data -
> data-hi and data-lo. These lines need to be defined in the
> devicetree, otherwise the driver will not probe successfully.
> 
> Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
> ---
>  .../bindings/gpio/gpio-wiegand.yaml           | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-wiegand.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-wiegand.example.dtb: wiegand: wiegand-gpio: {'compatible': ['wiegand,wiegand-gpio'], 'pinctrl-names': ['default'], 'pinctrl-0': [[4294967295]], 'data-hi-gpios': [[4294967295, 7, 6]], 'data-lo-gpios': [[4294967295, 6, 6]]} is not of type 'array'
	From schema: /usr/local/lib/python3.10/dist-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Documentation/devicetree/bindings/gpio/gpio-wiegand.example.dtb:0:0: /example-0/wiegand: failed to match any schema with compatible: ['wiegand']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-wiegand.example.dtb: wiegand-gpio: $nodename:0: 'wiegand-gpio' does not match '^wiegand-gpio@[0-9a-f]+$'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-wiegand.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.