Re: [PATCH v1 08/11] dt-bindings: usb: Add binding for Via lab VL817Q7 hub controller

[Rob Herring <robh@kernel.org>]

On Wed, 28 Dec 2022 10:03:17 +0000, Anand Moon wrote:
> The VIA Lab VL817-Q7 is a USB 3.1 Gen 1 4-Port hub controller that
> features 4 downstream ports, an internal 5V regulator and has
> external reset pin.
> 
> Add a device tree binding for its USB protocol part.
> The internal LDO is not covered by this and can just be modelled
> as a fixed regulator.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  .../bindings/usb/vialab,vl817q7.yaml          | 47 +++++++++++++++++++
>  1 file changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml: '$id' is a required property
	hint: Metaschema for devicetree binding documentation
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Error: Documentation/devicetree/bindings/usb/vialab,vl817q7.example.dts:26.17-18 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:434: Documentation/devicetree/bindings/usb/vialab,vl817q7.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1508: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221228100321.15949-9-linux.amoon@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.