From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <quic_rohkumar@quicinc.com>,
<srinivas.kandagatla@linaro.org>, <dianders@chromium.org>,
<swboyd@chromium.org>, <judyhsiao@chromium.org>,
<konrad.dybcio@linaro.org>, <mka@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Subject: [PATCH v2 1/8] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file
Date: Thu, 5 Jan 2023 19:07:48 +0530 [thread overview]
Message-ID: <1672925875-2107-2-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1672925875-2107-1-git-send-email-quic_srivasam@quicinc.com>
Split common idp dtsi file into audio specific dtsi and common
idp dtsi file.
It is required to isolate idp and crd-rev3 platform device tree nodes
and convert crd-rev3 platform device tree nodes into audioreach specific
device tree nodes.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 135 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 126 -----------------------
3 files changed, 136 insertions(+), 126 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
new file mode 100644
index 0000000..d1aea28
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/{
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 1185141..b024626 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-idp.dtsi"
+#include "sc7280-audio-idp.dtsi"
#include "sc7280-idp-ec-h1.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index f7efb99..edec3ee 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -86,104 +86,6 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
-
- sound: sound {
- compatible = "google,sc7280-herobrine";
- model = "sc7280-wcd938x-max98360a-1mic";
-
- audio-routing =
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS3",
- "VA DMIC1", "MIC BIAS3",
- "VA DMIC2", "MIC BIAS1",
- "VA DMIC3", "MIC BIAS1",
- "TX SWR_ADC0", "ADC1_OUTPUT",
- "TX SWR_ADC1", "ADC2_OUTPUT",
- "TX SWR_ADC2", "ADC3_OUTPUT",
- "TX SWR_DMIC0", "DMIC1_OUTPUT",
- "TX SWR_DMIC1", "DMIC2_OUTPUT",
- "TX SWR_DMIC2", "DMIC3_OUTPUT",
- "TX SWR_DMIC3", "DMIC4_OUTPUT",
- "TX SWR_DMIC4", "DMIC5_OUTPUT",
- "TX SWR_DMIC5", "DMIC6_OUTPUT",
- "TX SWR_DMIC6", "DMIC7_OUTPUT",
- "TX SWR_DMIC7", "DMIC8_OUTPUT";
-
- qcom,msm-mbhc-hphl-swh = <1>;
- qcom,msm-mbhc-gnd-swh = <1>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
-
- dai-link@0 {
- link-name = "MAX98360A";
- reg = <0>;
-
- cpu {
- sound-dai = <&lpass_cpu MI2S_SECONDARY>;
- };
-
- codec {
- sound-dai = <&max98360a>;
- };
- };
-
- dai-link@1 {
- link-name = "DisplayPort";
- reg = <1>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_DP_RX>;
- };
-
- codec {
- sound-dai = <&mdss_dp>;
- };
- };
-
- dai-link@2 {
- link-name = "WCD9385 Playback";
- reg = <2>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
- };
-
- codec {
- sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
- };
- };
-
- dai-link@3 {
- link-name = "WCD9385 Capture";
- reg = <3>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
- };
-
- codec {
- sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
- };
- };
-
- dai-link@4 {
- link-name = "DMIC";
- reg = <4>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
- };
-
- codec {
- sound-dai = <&lpass_va_macro 0>;
- };
- };
- };
};
&apps_rsc {
@@ -381,34 +283,6 @@
modem-init;
};
-&lpass_cpu {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
-
- dai-link@1 {
- reg = <MI2S_SECONDARY>;
- qcom,playback-sd-lines = <0>;
- };
-
- dai-link@5 {
- reg = <LPASS_DP_RX>;
- };
-
- dai-link@6 {
- reg = <LPASS_CDC_DMA_RX0>;
- };
-
- dai-link@19 {
- reg = <LPASS_CDC_DMA_TX3>;
- };
-
- dai-link@25 {
- reg = <LPASS_CDC_DMA_VA_TX0>;
- };
-};
-
&lpass_rx_macro {
status = "okay";
};
--
2.7.4
next prev parent reply other threads:[~2023-01-05 13:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 13:37 [PATCH v2 0/8] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
2023-01-05 13:37 ` Srinivasa Rao Mandadapu [this message]
2023-01-10 10:57 ` [PATCH v2 1/8] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file Krzysztof Kozlowski
2023-01-19 12:08 ` Srinivasa Rao Mandadapu
2023-01-05 13:37 ` [PATCH v2 2/8] arm64: dts: qcom: sc7280: audioreach: Add sound node Srinivasa Rao Mandadapu
2023-01-10 11:00 ` Krzysztof Kozlowski
2023-01-19 12:13 ` Srinivasa Rao Mandadapu
2023-01-05 13:37 ` [PATCH v2 3/8] arm64: dts: qcom: sc7280: audioreach: Add lpass pil node Srinivasa Rao Mandadapu
2023-01-10 11:08 ` Krzysztof Kozlowski
2023-01-05 13:37 ` [PATCH v2 4/8] arm64: dts: qcom: sc7280: audioreach: Update VA/RX/TX macro clock nodes Srinivasa Rao Mandadapu
2023-01-10 11:12 ` Krzysztof Kozlowski
2023-01-05 13:37 ` [PATCH v2 5/8] arm64: dts: qcom: sc7280: audioreach: Update lpass_tlmm node Srinivasa Rao Mandadapu
2023-01-10 11:13 ` Krzysztof Kozlowski
2023-01-05 13:37 ` [PATCH v2 6/8] arm64: dts: qcom: sc7280: audioreach: Update lpasscc reg property Srinivasa Rao Mandadapu
2023-01-05 13:37 ` [PATCH v2 7/8] arm64: dts: qcom: sc7280: audioreach: Add CGCR reset property Srinivasa Rao Mandadapu
2023-01-05 13:37 ` [PATCH v2 8/8] arm64: dts: qcom: sc7280: audioreach: Disable legacy path clock nodes Srinivasa Rao Mandadapu
2023-01-10 11:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1672925875-2107-2-git-send-email-quic_srivasam@quicinc.com \
--to=quic_srivasam@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=quic_rohkumar@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®