mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jing Zhang <renyu.zj@linux.alibaba.com>
To: Will Deacon <will@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Shuai Xue <xueshuai@linux.alibaba.com>,
	Zhuo Song <zhuo.song@linux.alibaba.com>,
	Jing Zhang <renyu.zj@linux.alibaba.com>
Subject: [PATCH] perf/arm-cmn: Fix and refactor device mapping resource
Date: Thu, 16 Feb 2023 16:17:50 +0800	[thread overview]
Message-ID: <1676535470-120560-1-git-send-email-renyu.zj@linux.alibaba.com> (raw)

The devm_platform_ioremap_resource() won't let the platform device
claim resource when the ACPI companion device has already claimed it.
If CMN-ANY except CMN600 is ACPI companion device, it will return
-EBUSY in devm_platform_ioremap_resource(), and the driver cannot be
successfully installed.

So let ACPI companion device call arm_cmn_acpi_probe and not claim
resource again. In addition, the arm_cmn_acpi_probe() and
arm_cmn_of_probe() functions are refactored to make them compatible
with both CMN600 and CMN-ANY.

Fixes: 61ec1d875812 ("perf/arm-cmn: Demarcate CMN-600 specifics")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
---
 drivers/perf/arm-cmn.c | 57 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 37 insertions(+), 20 deletions(-)

diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index 1deb61b..beb3b37 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -2206,7 +2206,7 @@ static int arm_cmn_discover(struct arm_cmn *cmn, unsigned int rgn_offset)
 	return 0;
 }
 
-static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *cmn)
+static int arm_cmn_acpi_probe(struct platform_device *pdev, struct arm_cmn *cmn)
 {
 	struct resource *cfg, *root;
 
@@ -2214,12 +2214,21 @@ static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *c
 	if (!cfg)
 		return -EINVAL;
 
-	root = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!root)
-		return -EINVAL;
+	/* If ACPI defines more than one resource, such as cmn-600, then there may be
+	 * a deviation between ROOTNODEBASE and PERIPHBASE, and ROOTNODEBASE can
+	 * be obtained from the second resource. Otherwise, it can be considered that
+	 * ROOT NODE BASE is PERIPHBASE. This is compatible with cmn-600 and cmn-any.
+	 */
+	if (pdev->num_resources > 1) {
+		root = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!root)
+			return -EINVAL;
 
-	if (!resource_contains(cfg, root))
-		swap(cfg, root);
+		if (!resource_contains(cfg, root))
+			swap(cfg, root);
+	} else {
+		root = cfg;
+	}
 	/*
 	 * Note that devm_ioremap_resource() is dumb and won't let the platform
 	 * device claim cfg when the ACPI companion device has already claimed
@@ -2227,17 +2236,30 @@ static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *c
 	 * appropriate name, we don't really need to do it again here anyway.
 	 */
 	cmn->base = devm_ioremap(cmn->dev, cfg->start, resource_size(cfg));
-	if (!cmn->base)
-		return -ENOMEM;
+	if (IS_ERR(cmn->base))
+		return PTR_ERR(cmn->base);
 
 	return root->start - cfg->start;
 }
 
-static int arm_cmn600_of_probe(struct device_node *np)
+static int arm_cmn_of_probe(struct platform_device *pdev, struct arm_cmn *cmn)
 {
 	u32 rootnode;
+	int ret;
+
+	cmn->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(cmn->base))
+		return PTR_ERR(cmn->base);
 
-	return of_property_read_u32(np, "arm,root-node", &rootnode) ?: rootnode;
+	/* If of_property_read_u32() return EINVAL, it means that device tree has
+	 * not define root-node, and root-node will return 0, which is compatible
+	 * with cmn-600 and cmn-any.
+	 */
+	ret = of_property_read_u32(pdev->dev.of_node, "arm,root-node", &rootnode);
+	if (ret == -EINVAL)
+		return 0;
+
+	return rootnode;
 }
 
 static int arm_cmn_probe(struct platform_device *pdev)
@@ -2255,16 +2277,11 @@ static int arm_cmn_probe(struct platform_device *pdev)
 	cmn->model = (unsigned long)device_get_match_data(cmn->dev);
 	platform_set_drvdata(pdev, cmn);
 
-	if (cmn->model == CMN600 && has_acpi_companion(cmn->dev)) {
-		rootnode = arm_cmn600_acpi_probe(pdev, cmn);
-	} else {
-		rootnode = 0;
-		cmn->base = devm_platform_ioremap_resource(pdev, 0);
-		if (IS_ERR(cmn->base))
-			return PTR_ERR(cmn->base);
-		if (cmn->model == CMN600)
-			rootnode = arm_cmn600_of_probe(pdev->dev.of_node);
-	}
+	if (has_acpi_companion(cmn->dev))
+		rootnode = arm_cmn_acpi_probe(pdev, cmn);
+	else
+		rootnode = arm_cmn_of_probe(pdev, cmn);
+
 	if (rootnode < 0)
 		return rootnode;
 
-- 
1.8.3.1


             reply	other threads:[~2023-02-16  8:19 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-16  8:17 Jing Zhang [this message]
2023-02-18 15:16 ` Jing Zhang
2023-03-06  6:18 ` Jing Zhang
2023-03-27 14:05 ` Will Deacon
2023-03-27 14:27   ` Robin Murphy
2023-03-29  9:48     ` Jing Zhang
2023-03-29 10:53       ` Robin Murphy
2023-03-29 11:34         ` Jing Zhang
2025-02-18  5:20     ` YinFengwei
2023-03-29 12:08   ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1676535470-120560-1-git-send-email-renyu.zj@linux.alibaba.com \
    --to=renyu.zj@linux.alibaba.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=will@kernel.org \
    --cc=xueshuai@linux.alibaba.com \
    --cc=zhuo.song@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®