[PATCH v2 4/6] vt/vt: Add SRG mouse reporting protocol

[Tammo Block <tammo.block@gmail.com>]

The SRG protocol indicates a button release by appending a "m" to the
report. In this case the button number is not 3 (RELEASEEVENT) but
the number of the button that was released. As release event are only
reported for the first three buttons (LOWBUTTONMASK), we need to store
the number on click events because it is not sent to us from userspace.

We also need to check for the case where no button state change occurred
at all (bit 6 set), in this case a value of 3 is OK even in SRG.

Signed-off-by: Tammo Block <tammo.block@gmail.com>
---
 drivers/tty/vt/vt.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9abf2829b1d3..9aae3eac7989 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1838,15 +1838,34 @@ static inline void respond_ID(struct tty_struct *tty)
 	respond_string(vt102_id, strlen(vt102_id), tty->port);
 }
 
+#define ANYBUTTONMASK	0xc3
+#define LOWBUTTONMASK	0x03
+#define RELEASEEVENT	0x03
+
 enum { Mouse_X10 = 0, Mouse_SRG, Mouse_URXVT};
 
 void mouse_report(struct tty_struct *tty, int butt, int mrx, int mry)
 {
-	char buf[8];
+	static char last_btn = RELEASEEVENT;
+	char buf[20];
+	bool rel;
 	int len;
 
-	len = sprintf(buf, "\033[M%c%c%c", (char)(' ' + butt),
-			(char)('!' + mrx), (char)('!' + mry));
+	switch (vc_cons[fg_console].d->vc_protocol_mouse) {
+		case Mouse_SRG:
+			rel = (butt & ANYBUTTONMASK) == RELEASEEVENT;
+			if ((butt & ANYBUTTONMASK) < RELEASEEVENT)
+				last_btn = butt & LOWBUTTONMASK;
+			if ((butt & TIOCL_SELBUTTONMASK) == RELEASEEVENT)
+				butt = (butt & ~LOWBUTTONMASK) | last_btn;
+			len = sprintf(buf, "\033[<%d;%d;%d%c", butt,
+					mrx + 1, mry + 1, rel ? 'm' : 'M');
+			break;
+		default:
+			len = sprintf(buf, "\033[M%c%c%c", (char)(' ' + butt),
+					(char)('!' + mrx), (char)('!' + mry));
+			break;
+	}
 	respond_string(buf, len, tty->port);
 }
 
-- 
2.27.0