From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: shengjiu.wang@gmail.com, Xiubo.Lee@gmail.com, festevam@gmail.com,
nicoleotsuka@gmail.com, lgirdwood@gmail.com, broonie@kernel.org,
perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: fsl_sai: MCLK bind with TX/RX enable bit
Date: Fri, 5 May 2023 15:55:22 +0800 [thread overview]
Message-ID: <1683273322-2525-1-git-send-email-shengjiu.wang@nxp.com> (raw)
On i.MX8MP, the sai MCLK is bound with TX/RX enable bit,
which means the TX/RE enable bit need to be enabled then
MCLK can be output on PAD.
Some codec (for example: WM8962) needs the MCLK output
earlier, otherwise there will be issue for codec
configuration.
Add new soc data "mclk_with_tere" for this platform and
enable the MCLK output in startup stage.
As "mclk_with_tere" only applied to i.MX8MP, currently
The soc data is shared with i.MX8MN, so need to add
an i.MX8MN own soc data with "mclk_with_tere" disabled.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_sai.c | 24 +++++++++++++++++++++---
sound/soc/fsl/fsl_sai.h | 2 ++
2 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index abdaffb00fbd..d9344025dc16 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -1400,7 +1400,9 @@ static int fsl_sai_probe(struct platform_device *pdev)
sai->cpu_dai_drv.symmetric_sample_bits = 0;
}
- if (of_property_read_bool(np, "fsl,sai-mclk-direction-output") &&
+ sai->mclk_direction_output = of_property_read_bool(np, "fsl,sai-mclk-direction-output");
+
+ if (sai->mclk_direction_output &&
of_device_is_compatible(np, "fsl,imx6ul-sai")) {
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
if (IS_ERR(gpr)) {
@@ -1443,7 +1445,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
dev_warn(dev, "Error reading SAI version: %d\n", ret);
/* Select MCLK direction */
- if (of_property_read_bool(np, "fsl,sai-mclk-direction-output") &&
+ if (sai->mclk_direction_output &&
sai->soc_data->max_register >= FSL_SAI_MCTL) {
regmap_update_bits(sai->regmap, FSL_SAI_MCTL,
FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
@@ -1562,6 +1564,17 @@ static const struct fsl_sai_soc_data fsl_sai_imx8mm_data = {
.max_register = FSL_SAI_MCTL,
};
+static const struct fsl_sai_soc_data fsl_sai_imx8mn_data = {
+ .use_imx_pcm = true,
+ .use_edma = false,
+ .fifo_depth = 128,
+ .reg_offset = 8,
+ .mclk0_is_mclk1 = false,
+ .pins = 8,
+ .flags = 0,
+ .max_register = FSL_SAI_MDIV,
+};
+
static const struct fsl_sai_soc_data fsl_sai_imx8mp_data = {
.use_imx_pcm = true,
.use_edma = false,
@@ -1571,6 +1584,7 @@ static const struct fsl_sai_soc_data fsl_sai_imx8mp_data = {
.pins = 8,
.flags = 0,
.max_register = FSL_SAI_MDIV,
+ .mclk_with_tere = true,
};
static const struct fsl_sai_soc_data fsl_sai_imx8ulp_data = {
@@ -1606,7 +1620,7 @@ static const struct of_device_id fsl_sai_ids[] = {
{ .compatible = "fsl,imx8mm-sai", .data = &fsl_sai_imx8mm_data },
{ .compatible = "fsl,imx8mp-sai", .data = &fsl_sai_imx8mp_data },
{ .compatible = "fsl,imx8ulp-sai", .data = &fsl_sai_imx8ulp_data },
- { .compatible = "fsl,imx8mn-sai", .data = &fsl_sai_imx8mp_data },
+ { .compatible = "fsl,imx8mn-sai", .data = &fsl_sai_imx8mn_data },
{ .compatible = "fsl,imx93-sai", .data = &fsl_sai_imx93_data },
{ /* sentinel */ }
};
@@ -1671,6 +1685,10 @@ static int fsl_sai_runtime_resume(struct device *dev)
if (ret)
goto disable_rx_clk;
+ if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output)
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
+ FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
+
return 0;
disable_rx_clk:
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 197748a888d5..3eb994aef36a 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -230,6 +230,7 @@ struct fsl_sai_soc_data {
bool use_imx_pcm;
bool use_edma;
bool mclk0_is_mclk1;
+ bool mclk_with_tere;
unsigned int fifo_depth;
unsigned int pins;
unsigned int reg_offset;
@@ -287,6 +288,7 @@ struct fsl_sai {
bool synchronous[2];
struct fsl_sai_dl_cfg *dl_cfg;
unsigned int dl_cfg_cnt;
+ bool mclk_direction_output;
unsigned int mclk_id[2];
unsigned int mclk_streams;
--
2.34.1
next reply other threads:[~2023-05-05 8:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-05 7:55 Shengjiu Wang [this message]
2023-05-09 6:38 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1683273322-2525-1-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®