From: Paul Mackerras <paulus@samba.org>
To: akpm@osdl.org
Cc: anton@samba.org, ahuja@austin.ibm.com, linux-kernel@vger.kernel.org
Subject: [PATCH] PPC64 collect and export low-level cpu usage statistics
Date: Thu, 10 Feb 2005 08:56:18 +1100 [thread overview]
Message-ID: <16906.34562.379000.336836@cargo.ozlabs.ibm.com> (raw)
POWER5 machines have a per-hardware-thread register which counts at a
rate which is proportional to the percentage of cycles on which the
cpu dispatches an instruction for this thread (if the thread gets all
the dispatch cycles it counts at the same rate as the timebase
register). This register is also context-switched by the hypervisor.
Thus it gives a fine-grained measure of the actual cpu usage by the
thread over time.
This patch adds code to read this register every timer interrupt and
on every context switch. The total over all virtual processors is
available through the existing /proc/ppc64/lparcfg file, giving a
way to measure the total cpu usage over the whole partition.
Andrew, this is relatively non-invasive, but nevertheless you may
prefer to put it in -mm until 2.6.11 is out.
Signed-off-by: Manish Ahuja <ahuja@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff -urN linux-2.5/arch/ppc64/kernel/lparcfg.c test/arch/ppc64/kernel/lparcfg.c
--- linux-2.5/arch/ppc64/kernel/lparcfg.c 2005-01-06 13:13:08.000000000 +1100
+++ test/arch/ppc64/kernel/lparcfg.c 2005-02-09 22:38:05.508190616 +1100
@@ -33,8 +33,9 @@
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/system.h>
+#include <asm/time.h>
-#define MODULE_VERS "1.5"
+#define MODULE_VERS "1.6"
#define MODULE_NAME "lparcfg"
/* #define LPARCFG_DEBUG */
@@ -214,13 +215,20 @@
}
static unsigned long get_purr(void);
-/* ToDo: get sum of purr across all processors. The purr collection code
- * is coming, but at this time is still problematic, so for now this
- * function will return 0.
- */
+
+/* Track sum of all purrs across all processors. This is used to further */
+/* calculate usage values by different applications */
+
static unsigned long get_purr(void)
{
unsigned long sum_purr = 0;
+ int cpu;
+ struct cpu_usage *cu;
+
+ for_each_cpu(cpu) {
+ cu = &per_cpu(cpu_usage_array, cpu);
+ sum_purr += cu->current_tb;
+ }
return sum_purr;
}
diff -urN linux-2.5/arch/ppc64/kernel/process.c test/arch/ppc64/kernel/process.c
--- linux-2.5/arch/ppc64/kernel/process.c 2005-01-29 09:58:49.000000000 +1100
+++ test/arch/ppc64/kernel/process.c 2005-02-10 08:09:22.428216944 +1100
@@ -51,6 +51,7 @@
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
+#include <asm/time.h>
#ifndef CONFIG_SMP
struct task_struct *last_task_used_math = NULL;
@@ -168,6 +169,8 @@
#endif /* CONFIG_ALTIVEC */
+DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
struct task_struct *__switch_to(struct task_struct *prev,
struct task_struct *new)
{
@@ -206,6 +209,21 @@
new_thread = &new->thread;
old_thread = ¤t->thread;
+/* Collect purr utilization data per process and per processor wise */
+/* purr is nothing but processor time base */
+
+#if defined(CONFIG_PPC_PSERIES)
+ if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
+ struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
+ long unsigned start_tb, current_tb;
+ start_tb = old_thread->start_tb;
+ cu->current_tb = current_tb = mfspr(SPRN_PURR);
+ old_thread->accum_tb += (current_tb - start_tb);
+ new_thread->start_tb = current_tb;
+ }
+#endif
+
+
local_irq_save(flags);
last = _switch(old_thread, new_thread);
diff -urN linux-2.5/arch/ppc64/kernel/time.c test/arch/ppc64/kernel/time.c
--- linux-2.5/arch/ppc64/kernel/time.c 2005-01-22 09:25:41.000000000 +1100
+++ test/arch/ppc64/kernel/time.c 2005-02-10 08:09:34.412257896 +1100
@@ -334,6 +334,14 @@
}
#endif
+/* collect purr register values often, for accurate calculations */
+#if defined(CONFIG_PPC_PSERIES)
+ if (cur_cpu_spec->firmware_features & FW_FEATURE_SPLPAR) {
+ struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
+ cu->current_tb = mfspr(SPRN_PURR);
+ }
+#endif
+
irq_exit();
return 1;
diff -urN linux-2.5/include/asm-ppc64/processor.h test/include/asm-ppc64/processor.h
--- linux-2.5/include/asm-ppc64/processor.h 2005-01-17 08:47:37.000000000 +1100
+++ test/include/asm-ppc64/processor.h 2005-02-09 22:38:05.528187576 +1100
@@ -562,7 +562,9 @@
double fpr[32]; /* Complete floating point set */
unsigned long fpscr; /* Floating point status (plus pad) */
unsigned long fpexc_mode; /* Floating-point exception mode */
- unsigned long pad[3]; /* was saved_msr, saved_softe */
+ unsigned long start_tb; /* Start purr when proc switched in */
+ unsigned long accum_tb; /* Total accumilated purr for process */
+ unsigned long pad; /* was saved_msr, saved_softe */
#ifdef CONFIG_ALTIVEC
/* Complete AltiVec register set */
vector128 vr[32] __attribute((aligned(16)));
diff -urN linux-2.5/include/asm-ppc64/time.h test/include/asm-ppc64/time.h
--- linux-2.5/include/asm-ppc64/time.h 2005-01-06 13:13:10.000000000 +1100
+++ test/include/asm-ppc64/time.h 2005-02-09 22:38:05.529187424 +1100
@@ -102,5 +102,14 @@
unsigned mulhwu_scale_factor(unsigned, unsigned);
void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
unsigned divisor, struct div_result *dr );
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+ u64 current_tb; /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
#endif /* __KERNEL__ */
#endif /* __PPC64_TIME_H */
next reply other threads:[~2005-02-09 21:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-09 21:56 Paul Mackerras [this message]
2005-02-09 23:06 ` Andrew Morton
2005-02-09 23:17 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16906.34562.379000.336836@cargo.ozlabs.ibm.com \
--to=paulus@samba.org \
--cc=ahuja@austin.ibm.com \
--cc=akpm@osdl.org \
--cc=anton@samba.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®