mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Linux USB <linux-usb@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>,
	Felipe Balbi <balbi@kernel.org>
Subject: Re: [PATCH] PM / USB: hcd_pci: Skip secondary root hub check for HCD_DEAD()
Date: Tue, 25 Jul 2017 23:36:40 +0200	[thread overview]
Message-ID: <1696811.btiC2oedaq@aspire.rjw.lan> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1707251705060.1605-100000@iolanthe.rowland.org>

On Tuesday, July 25, 2017 05:06:40 PM Alan Stern wrote:
> On Tue, 25 Jul 2017, Rafael J. Wysocki wrote:
> 
> > On Tuesday, July 25, 2017 05:59:04 PM Rafael J. Wysocki wrote:
> > > On Tuesday, July 25, 2017 10:05:03 AM Alan Stern wrote:
> > > > On Tue, 25 Jul 2017, Rafael J. Wysocki wrote:
> > > > 
> > > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > 
> > > > > If HCD_DEAD(hcd) is "true" in check_root_hub_suspended(), it is
> > > > > rather pointless to check the secondary root hub, so return early
> > > > > then.
> > > > > 
> > > > > This actually fixes occasional suspend failures on one of my test
> > > > > machines.
> > > > > 
> > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > ---
> > > > >  drivers/usb/core/hcd-pci.c |    3 +++
> > > > >  1 file changed, 3 insertions(+)
> > > > > 
> > > > > Index: linux-pm/drivers/usb/core/hcd-pci.c
> > > > > ===================================================================
> > > > > --- linux-pm.orig/drivers/usb/core/hcd-pci.c
> > > > > +++ linux-pm/drivers/usb/core/hcd-pci.c
> > > > > @@ -427,6 +427,9 @@ static int check_root_hub_suspended(stru
> > > > >  		dev_warn(dev, "Root hub is not suspended\n");
> > > > >  		return -EBUSY;
> > > > >  	}
> > > > > +	if (HCD_DEAD(hcd))
> > > > > +		return 0;
> > > > > +
> > > > >  	if (hcd->shared_hcd) {
> > > > >  		hcd = hcd->shared_hcd;
> > > > >  		if (HCD_RH_RUNNING(hcd)) {
> > > > 
> > > > While this is an okay solution, IMO it would be more reliable and more 
> > > > general to have usb_hc_died() clear the HCD_FLAG_RH_RUNNING bit and set 
> > > > the HCD_FLAG_DEAD bit in the shared hcd.  Right now it only does these 
> > > > things for the primary.
> > > > 
> > > > Would you like to write and test a patch to do that?
> > > 
> > > I can do that.
> > 
> > Just to make sure that we are on the same page, is the below what you mean?
> > 
> > ---
> >  drivers/usb/core/hcd.c |    2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > Index: linux-pm/drivers/usb/core/hcd.c
> > ===================================================================
> > --- linux-pm.orig/drivers/usb/core/hcd.c
> > +++ linux-pm/drivers/usb/core/hcd.c
> > @@ -2485,6 +2485,8 @@ void usb_hc_died (struct usb_hcd *hcd)
> >  	}
> >  	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
> >  		hcd = hcd->shared_hcd;
> > +		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
> > +		set_bit(HCD_FLAG_DEAD, &hcd->flags);
> >  		if (hcd->rh_registered) {
> >  			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
> 
> Yes, exactly.  Does it fix your suspend problem?

Yes, it does.

I guess I should resend it with a changelog and tags, then.

Thanks,
Rafael

  reply	other threads:[~2017-07-25 21:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-24 23:04 Rafael J. Wysocki
2017-07-25 14:05 ` Alan Stern
2017-07-25 15:59   ` Rafael J. Wysocki
2017-07-25 20:35     ` Rafael J. Wysocki
2017-07-25 21:06       ` Alan Stern
2017-07-25 21:36         ` Rafael J. Wysocki [this message]
2017-07-25 21:58 ` [PATCH] USB: hcd: Mark secondary HCD as dead if the primary one died Rafael J. Wysocki
2017-07-26 14:21   ` Alan Stern
2017-07-26 17:07     ` Rafael J. Wysocki
2017-07-30 14:13       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1696811.btiC2oedaq@aspire.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@linux.intel.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®