[tip: timers/core] clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware

["tip-bot2 for Ronald Wahl" <tip-bot2@linutronix.de>]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0
Gitweb:        https://git.kernel.org/tip/6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0
Author:        Ronald Wahl <ronald.wahl@raritan.com>
AuthorDate:    Sat, 07 Oct 2023 18:17:13 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Fri, 13 Oct 2023 12:56:50 +02:00

clocksource/drivers/timer-atmel-tcb: Fix initialization on SAM9 hardware

On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit
high resolution timer that is used as scheduler clock when the kernel
has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB).

The driver initially triggers a reset-to-zero of the two timers but this
reset is only performed on the next rising clock. For the first timer
this is ok - it will be in the next 60ns (16MHz clock). For the chained
second timer this will only happen after the first timer overflows, i.e.
after 2^16 clocks (~4ms with a 16MHz clock). So with other words the
scheduler clock resets to 0 after the first 2^16 clock cycles.

It looks like that the scheduler does not like this and behaves wrongly
over its lifetime, e.g. some tasks are scheduled with a long delay. Why
that is and if there are additional requirements for this behaviour has
not been further analysed.

There is a simple fix for resetting the second timer as well when the
first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in
the Channel Mode register (CMR) of the first timer. This will also rise
the TIOA line (clock input of the second timer) when a software trigger
respective SYNC is issued.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de
---
 drivers/clocksource/timer-atmel-tcb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index 27af17c..2a90c92 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -315,6 +315,7 @@ static void __init tcb_setup_dual_chan(struct atmel_tc *tc, int mck_divisor_idx)
 	writel(mck_divisor_idx			/* likely divide-by-8 */
 			| ATMEL_TC_WAVE
 			| ATMEL_TC_WAVESEL_UP		/* free-run */
+			| ATMEL_TC_ASWTRG_SET		/* TIOA0 rises at software trigger */
 			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
 			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
 			tcaddr + ATMEL_TC_REG(0, CMR));