Re: [PATCH v2 1/2] dt-bindings: iio: frequency: add admfm2000

[Rob Herring <robh@kernel.org>]

On Tue, 21 Nov 2023 18:00:11 +0800, Kim Seer Paller wrote:
> Dual microwave down converter module with input RF and LO frequency
> ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
> 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
> for each down conversion path.
> 
> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
> ---
> V1 -> V2: Removed '|' after description. Specified the pins connected to
>           the GPIOs. Added additionalProperties: false. Changed node name to gpio.
>           Aligned < syntax with the previous syntax in the examples.
> 
>  .../bindings/iio/frequency/adi,admfm2000.yaml | 130 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 137 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml:14:5: [warning] wrong indentation: expected 2 but found 4 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231121100012.112861-1-kimseer.paller@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.