Re: [PATCH v2 4/6] dt-bindings: net: add hisilicon,hisi-femac

[Rob Herring <robh@kernel.org>]

On Fri, 16 Feb 2024 18:02:03 +0800, Yang Xiwen wrote:
> This binding gets rewritten. Compared to previous txt based binding doc,
> the following changes are made according to the TRM:
> 
> - No "hisi-femac-v1/2" binding anymore
> - Remove unmaintained Hi3516 SoC, add Hi3798MV200
> - add MDIO subnode
> - add ahb bus clock, phy clock and reset
> 
> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
> ---
>  .../bindings/net/hisilicon,hisi-femac.yaml         | 117 +++++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/net/hisilicon,hisi-femac-mdio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.example.dtb: ethernet@9c30000: mdio@1100: False schema does not allow {'compatible': ['hisilicon,hisi-femac-mdio'], 'reg': [[4352, 32]], '#address-cells': [[1]], '#size-cells': [[0]], 'status': ['okay'], 'ethernet-phy@1': {'reg': [[1]], '#phy-cells': [[0]]}}
	from schema $id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml#
Documentation/devicetree/bindings/net/hisilicon,hisi-femac.example.dtb: /example-0/ethernet@9c30000/mdio@1100: failed to match any schema with compatible: ['hisilicon,hisi-femac-mdio']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240216-net-v2-4-89bd4b7065c2@outlook.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.