mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: Umang Jain <umang.jain@ideasonboard.com>, linux-media@vger.kernel.org
Cc: Alexander Shiyan <eagle.alexander923@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	open list <linux-kernel@vger.kernel.org>,
	Umang Jain <umang.jain@ideasonboard.com>
Subject: Re: [PATCH 5/5] media: imx335: Limit analogue gain value
Date: Wed, 06 Mar 2024 16:59:19 +0000	[thread overview]
Message-ID: <170974435963.362031.17853243017273896294@ping.linuxembedded.co.uk> (raw)
In-Reply-To: <20240306081038.212412-6-umang.jain@ideasonboard.com>

Quoting Umang Jain (2024-03-06 08:10:38)
> The sensor gain (both analog and digital) are controlled by a
> single gain value where:
> - 0dB to 30dB correspond to analog gain
> - 30.3dB to 72dB correspond to digital gain
> (with 0.3dB step)
> 
> Hence, limit the analogue gain value to 100.
> For digital gain, support can be added later if needed.
> 
> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>

I think this makes the behaviour more consistent with expectations from
userspace for the ANALOGUE_GAIN.

Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>


> ---
>  drivers/media/i2c/imx335.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index c00e0c2be3f3..701bd5318b45 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -45,7 +45,7 @@
>  /* Analog gain control */
>  #define IMX335_REG_AGAIN       CCI_REG8(0x30e8)
>  #define IMX335_AGAIN_MIN       0
> -#define IMX335_AGAIN_MAX       240
> +#define IMX335_AGAIN_MAX       100
>  #define IMX335_AGAIN_STEP      1
>  #define IMX335_AGAIN_DEFAULT   0
>  
> @@ -1169,6 +1169,14 @@ static int imx335_init_controls(struct imx335 *imx335)
>                                              IMX335_EXPOSURE_STEP,
>                                              IMX335_EXPOSURE_DEFAULT);
>  
> +       /*
> +        * The sensor has an analog gain and a digital gain, both controlled
> +        * through a single gain value, expressed in 0.3dB increments. Values
> +        * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values
> +        * up to 72.0dB (240) add further digital gain. Limit the range to
> +        * analog gain only, support for digital gain can be added separately
> +        * if needed.
> +        */
>         imx335->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
>                                                &imx335_ctrl_ops,
>                                                V4L2_CID_ANALOGUE_GAIN,
> -- 
> 2.43.0
>

      reply	other threads:[~2024-03-06 16:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-06  8:10 [PATCH 0/5] media: imx335: 2/4 lane ops and improvements Umang Jain
2024-03-06  8:10 ` [PATCH 1/5] media: imx335: Support 2 or 4 lane operation modes Umang Jain
2024-03-06 16:42   ` Dave Stevenson
2024-03-08  5:37     ` Umang Jain
2024-03-06 17:06   ` Sakari Ailus
2024-03-08 18:44   ` kernel test robot
2024-03-08 20:31   ` kernel test robot
2024-03-08 20:51   ` kernel test robot
2024-03-06  8:10 ` [PATCH 2/5] media: imx335: Parse fwnode properties Umang Jain
2024-03-06  8:10 ` [PATCH 3/5] media: imx335: Use V4L2 CCI for accessing sensor registers Umang Jain
2024-03-06 16:55   ` Kieran Bingham
2024-03-08 22:36   ` kernel test robot
2024-03-06  8:10 ` [PATCH 4/5] media: imx335: Fix active area height discrepency Umang Jain
2024-03-06 17:05   ` Kieran Bingham
2024-03-06 17:17     ` Umang Jain
2024-03-06  8:10 ` [PATCH 5/5] media: imx335: Limit analogue gain value Umang Jain
2024-03-06 16:59   ` Kieran Bingham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=170974435963.362031.17853243017273896294@ping.linuxembedded.co.uk \
    --to=kieran.bingham@ideasonboard.com \
    --cc=eagle.alexander923@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=umang.jain@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®